On Fri, 2008-11-21 at 13:24 +0100, Simon Kallweit wrote: > abhishek srivastava wrote:
> > can anyone plz plz spare some time to write the detailed procedure of > > porting ecos to LPC2148,plz mail me.......i really need tht..... > > had none of you ever done this porting????. > > > > Please follow the other mails I have sent you. You need to do a lot of > reading and trying before coming back here and post questions like > these, as you obviously still have a lot of confusion with the basics. > Read read read ! I would add that porting to a new platform requires quite a bit of experience, and that it is much better to start out by using one of the boards that are supported by the ports in CVS. There is a supported LPC board from Olimex (the LPC-P2106) which is cheap and will allow you to go through the tutorials and get up to speed before worrying about porting to a new platform. In fact, a lot of people don't bother with their own ports at all - there are a lot of production boards out there which are essentially standard, supported dev boards with the unused bits left off. Chris. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
