On Thu, Nov 27, 2008 at 07:07:10PM +0530, abhishek srivastava wrote: > > > > --- On Thu, 27/11/08, abhishek srivastava <[EMAIL PROTECTED]> wrote: > > > From: abhishek srivastava <[EMAIL PROTECTED]> > > Subject: Re: error generated during stub build > > To: "Simon Kallweit" <[EMAIL PROTECTED]> > > Date: Thursday, 27 November, 2008, 6:56 PM > > thanks for ur quick reply, bt if u cud look at this link > > (http://www.ecoscentric.com/ecospro/doc.cgi/html/ecospro-ref/arm-lpc2xxx-ea-quickstart.html), > > it sayd that redbot have larger image compared to stub. > > > > now,wht u say, and what shud i do > >
Bad quote. Read the below On LPC2xxx variants with less than 64KBytes SRAM, such as the 32KBytes on the LPC2148, it is typically expected that standalone applications will be programmed directly to on-chip Flash, either using a hardware JTAG/ICE unit via the QuickStart Prototype Board, or by serial using the on-chip In-System Programming (ISP) mechanism included with NXP LPC2xxx microcontrollers and a suitable host application running on a PC. Sergei -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
