Hi,
at the moment the eCos CVS contains a variant HAL for LPC2xxx and
LPC24xx parts. I've created the LPC24xx variant HAL because the LPC24xx
parts differ significantly from the former LPC2xxx parts. For example
those controllers have a different interrupt handling, different
internal peripherals and also the internal clock part differs a lot.
If you do a port, then you would do a port for a certain platform that
contains a certain LPC2xxx controller.
You should check, if the LPC2378 would fit to the LPC2xxx variant HAL or
to the LPC24xx. As far as I remember the LPC24xx and LPC23xx parts are
quite similar. Then you can do a platform port using the selected
variant HAL.
Maybe we should think about renaming the LPC24xx HAL so that it covers
all new LPC2xxx parts with the new design?
Regards, Uwe
Dipl. Inf. (FH)
Uwe Kindler
Software Engineering
--
cetoni GmbH
Am Wiesenring 6
D-07554 Korbussen
Tel.: +49 (0) 36602 338 28
Fax: +49 (0) 36602 338 11
[EMAIL PROTECTED]
http://www.cetoni.de
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
