Hello We are about to start project with MPC5554 http://www.phytec.com/products/sbc/PowerPC/phyCORE-MPC5554.html and we are interested in such port.
There were some entries in this mailing list but nothing is contributed so far. http://sourceware.org/ml/ecos-discuss/2006-11/msg00197.html However it may help us and community if we join forces, I have contributed an ESCI serial driver as a part of MAC7100 port http://ecos.sourceware.org/cgi-bin/cvsweb.cgi/ecos/packages/devs/serial/freescale/esci/?cvsroot=ecos Afaik ESCI is identical on both chips. INTC and some other peripherals should be similar or same and I think main effort to get it alive would be the boot loader. Regards Ilija Vladimir Nikolov wrote: > Hello, > > does anyone know if there is already an eCos port for the MPC5567 > (e200z6 core) architecture? > If not, probably for the Fujitsu MB91460 controller? > > Greetings, > Vlad > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
