Hi all, I have been looking around for information about a blackfin port of eCos. I have found a bit of information on the internet, but the official list of ports does not seem to include the Analog Devices blackfin DSP (http://ecos.sourceware.org/ecos/hardware.html).
I have listed the links I could find with some information about the eCos ports to the blackfin DSP. I figure there is a reason the blackfin architecture is not listed in the official ports section of eCos even though it seems from a first glance that a port has been completed. Does anyone have experience getting eCos to run on one of these DSP's? Are any of the ports for the blackfin considered stable/complete? I want to do some simple audio signal processing, starting with simple digital audio mixing of two stereo inputs into a single stereo output (4 channels in 2 channels out), possibly to be followed in the future by a beat detection algorithm and maybe some other audio filtering/effects. eCos is not required for this project, but it is a personal educational project and one of the areas I want to gain some experience using a RTOS such as eCos. The blackfin is an option for me, but I am open to other DSP options. Could anyone recommend a DSP I could use for basic audio processing that works with eCos (I am also using a FPGA on this board, so I am open to soft-core processors too if they can achieve what i require)? Thanks, Brendon. http://archiv.tu-chemnitz.de/pub/2006/0200/data/index.html Thesis porting eCos to the blackfin architecture http://www.nabble.com/port-ecos-to-blackfin-td1483925.html Message from someone thinking about doing a port in Nov 2005 http://trac.rfidguardian.org:8000/trac-0-11b/milestone/Port%20eCos%20%2B%20MRG%20to%20BlackFin%20Stamp-537%20development%20board Porting to Blackfin STAMP board -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
