joseph biswal wrote: > Thanks! > What i intend to do is either change the cdl values in the .ecm file i > am importing or change the generated file i.e .ecc. But the former > seems simpler, but the issue is haven't digged up to see what is the > difference between "user_value" and inferred value".
If you want to change a value, uncomment 'user_value' and modify it. Don't forget to run 'ecosconfig tree' afterwards (that's what makes the change take effect) You can't change 'inferred_value's as they are just that; inferred from other requirements. > On Wed, Mar 11, 2009 at 1:30 PM, Chris Zimman <[email protected]> wrote: >>> Does anybody have an idea on as to whether or not Redboot supporting >>> FAT32. I am unable to modify the .ecc file to get the CDL flags >>> enabled for SDHC and CYGPKG_REDBOOT_DISK but i am unable figure out >>> the dependency tree for each of them . If anybody has quick hints on >>> it, it would be great. >> The eCos FAT driver supports FAT32. If you use 'ecosconfig' to configure >> your tree, it should help you with getting the dependencies sorted out. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
