Dear Graham,
I recommend you to use JTAG debugging - you will spend a lot of time.
--
With best regards,
Ilko Iliev
Ronetix Development Tools GmbH
CPU Modules, JTAG/BDM Emulators and Flash Programmers
Waidhausenstrasse 13/5, 1140 Vienna, Austria
E-Mail: [email protected]; Web: www.ronetix.at
Chris Zimman wrote:
[-- snip --]
Quoting reams of previous message is also not required, just enough to sort
of continue the conversation.
I did not have mincom running.
I type arm-eabi-gdb -nw
DevBoard_install/tests/kernel/v3_0/tests/bin_sem0
at the gdb prompt
set remotebaud 38400
target remote /dev/ttyS0
After this according to the ecos documentation I should see some
information
about the current loaction and language.
What I get is
Remote Debugging using /dev/ttyS0
0x08003b3a in ?? ()
I dont get any extra information.
It looks as though GDB has attached and you are sitting at the current PC.
Is this a problem?
No, not necessarily. You may well be sitting in Redboot also, which GDB
knows nothing about in terms of symbols (since you haven't told it about them
yet).
I don't mean this in any kind of an insulting way, but do you know how to use
GDB for something like this (eg. are you familiar with add-symbol-file)?
Did you build the tests with debugging enabled (eg. -g)?
Again, because there isn't really a ton of info here, I can't just look at it
and say "Ah ha! The problem is [whatever]"
--Chris
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
