Thank you John, that worked like a charm :) Thanks everyone
On Wed, Jul 15, 2009 at 12:50 PM, John Dallaway<[email protected]> wrote: > Hi Bruno > > Bruno Ricci wrote: > >> I tried the same configuration with RTL8139 chip and without removing >> any package (I managed to have a pc with that chip) with no luck. Here >> some screenshots: >> >> http://files.getdropbox.com/u/1493094/ecos1.jpg >> http://files.getdropbox.com/u/1493094/ecos2.jpg >> >> Notice that my program only initializes the network card, and that >> there's a 20 sec sleep between the two screenshots. I tried to set a >> static IP, but I keep on having that SIOCIFADDR error. > > I assume you have switched to the eCos "pc_rltk8139" target. > > The reported hardware address (ff:ff:ff:ff:ff:ff) is bogus which > suggests that eCos is failing to interrogate your ethernet hardware > correctly. Try disabling the ethernet hardware in your PC's BIOS and see > if the behaviour is the same. If it is, perhaps your ethernet hardware > is reporting a PCI vendorID/deviceID pair which is not known to the eCos > driver? Check the known_8139_aliases[] array in the driver and extend it > if necessary. > > I hope this helps... > > John Dallaway > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
