> The lwIP TCP/IP stack provides its own HTTP server test. Simply > configure eCos for lwIP networking and then build eCos and the eCos > tests for lwIP. Run "arm-eabi-size" (assuming an ARM target) on the > resulting "httpd" test executable file.
Thanks for the tip John. But the test compilation is failing with the following error: make[1]: Leaving directory `/home/mandeep/ecos/sam7ex-lwIP/sam7ex-lwIP_build/infra/v3_0' /home/mandeep/ecos/gnutools/arm-eabi/bin/../lib/gcc/arm-eabi/4.3.2/../../../../arm-eabi/bin/ld: address 0x219ae8 of /home/mandeep/ecos/sam7ex-lwIP/sam7ex-lwIP_install/tests/infra/v3_0/tests/diag_sprintf2 section .bss is not within region ram make: Leaving directory `/home/mandeep/ecos/sam7ex-lwIP/sam7ex-lwIP_build' /home/mandeep/ecos/gnutools/arm-eabi/bin/../lib/gcc/arm-eabi/4.3.2/../../../../arm-eabi/bin/ld: address 0x219ae8 of /home/mandeep/ecos/sam7ex-lwIP/sam7ex-lwIP_install/tests/infra/v3_0/tests/diag_sprintf2 section .bss is not within region ram collect2: ld returned 1 exit status make[1]: *** [/home/mandeep/ecos/sam7ex-lwIP/sam7ex-lwIP_install/tests/infra/v3_0/tests/diag_sprintf2] Error 1 make[1]: *** Waiting for unfinished jobs.... /home/mandeep/ecos/gnutools/arm-eabi/bin/../lib/gcc/arm-eabi/4.3.2/../../../../arm-eabi/bin/ld: address 0x21a4d8 of /home/mandeep/ecos/sam7ex-lwIP/sam7ex-lwIP_install/tests/infra/v3_0/tests/cxxsupp section .bss is not within region ram /home/mandeep/ecos/gnutools/arm-eabi/bin/../lib/gcc/arm-eabi/4.3.2/../../../../arm-eabi/bin/ld: address 0x21a4d8 of /home/mandeep/ecos/sam7ex-lwIP/sam7ex-lwIP_install/tests/infra/v3_0/tests/cxxsupp section .bss is not within region ram collect2: ld returned 1 exit status make[1]: *** [/home/mandeep/ecos/sam7ex-lwIP/sam7ex-lwIP_install/tests/infra/v3_0/tests/cxxsupp] Error 1 make: *** [tests] Error 2 I have created a fresh config, choosing the at91sam7ex with iwIP template. The build passes, but the tests compilation is failing. The above errors are a little beyond me...but does it mean we've run out of RAM? Can I increase the amount of RAM in some config...for the sam7ex template? Thanks, -mandeep > > John Dallaway > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
