Hi Gianpaolo,
I saw that you ported the eCOS on the LPC2468 board from Embedded Artist. I
would like to do the same but on the new board LPC3250.
I have some questions.
- do you know if someone is already doing this port? (maybe you?)
- which was/is your development environment? Which JTag do you use and which
dev tool do you use (editor, debugger etc).
- did you received some help from Embedded Artist?
- You should ask you first question on the eCos mailing list
([email protected]). I don't know if someone is working on
such a port
- I used Olimex ARM-USB-OCD
(http://www.olimex.com/dev/arm-usb-ocd.html), OpenOCD
(openocd.berlios.de), Eclipse + Zylin CDT
(http://opensource.zylin.com/embeddedcdt.html)
- I had no questions to Embedded Artists
Doing the LPC3250 port is a little bit different from the LPC2468 port
because the LPC3250 is an ARM9 processor wheras the LPC2468 is an ARM7
processor.
Regards, Uwe
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
