How to fix this problem. This is IXP425 based board with 8MB flash and 32 MB RAM. I am getting this error: ----------------------------------------------------- h...@home-desktop:~/test2$ xscale-elf-gdb -nw GNU gdb xscale-030422 Copyright 2002 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i686-pc-linux-gnulibc2.2 --target=xscale-elf". (gdb) target remote 192.168.5.217:9000 Remote debugging using 192.168.5.217:9000 Cannot access memory at address 0xfc0ffc01 0x7c090250 in ?? () (gdb) load basic1 Loading section .rom_vectors, size 0x40 lma 0x100000 Loading section .text, size 0x13464 lma 0x100040 Loading section .rodata, size 0x4ac lma 0x1134a4 Loading section .data, size 0x3ec lma 0x113950 Start address 0x100040, load size 81212 Transfer rate: 46406 bits/sec, 303 bytes/write. (gdb) continue Continuing.
Program received signal SIGBUS, Bus error. Cannot access memory at address 0xfc0ffc01 0x00100040 in ?? () (gdb) ------------------------- I also checked h...@home-desktop:~/test2$ xscale-elf-objdump -f basic1 basic1: file format elf32-bigarm architecture: xscale, flags 0x00000112: EXEC_P, HAS_SYMS, D_PAGED start address 0x00100040 -------------------------------------- Thanks Ajit -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
