m mariga wrote: > But at this point stuck to silence and no reply like before. > > As I compared to previous normal RedBoot Serial log like next, I realized > it stopped at network operation.
It is hard to follow precisely what you are doing from your mail. I am assuming that you have switched to using RedBoot rather than the plain GDB stubs. > BOOTP[eth0] op: REPLY > htype: Ethernet > hlen: 6 > hops: 0 > xid: 0x0 > secs: 0 > flags: 0x0 > hw_addr: 00:02:cb:01:42:b9 > client IP: 172.16.1.200 > my IP: 172.16.1.200 For avoidance of doubt, the RedBoot TCP/IP stack and the eCos application TCP/IP stack must use different IP addresses. Your eCos networking stack is using DHCP/BOOTP to obtain an IP address so you must configure RedBoot to use a unique static IP address (not 172.16.1.200). John Dallaway -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
