On 10/16/2009 10:43 AM, m mariga wrote:
Hello,Gary,and everyone,
I am very sorry.
I dare your anger for my obstination,but I must confirm next point.
Gary wrote,
I would like to load new application object to target using RedBoot via
Telnet from host PC during target's application running.
Is it impossible ?
It is not possible. As I said, once your application is running,
RedBoot is out of the picture.
Am I right in getting you that even I use BOOTP or DHCP to get dynamic
IP address for application and assign other staic IP address for
RedBoot,I could not connect to RedBoot via Telnet during application
running ?
Once your application starts, RedBoot is GONE. The only way
to return to it is to exit your application, typically by
resetting the hardware.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
