> > On 03/16/2010 05:55 AM, Stefano Mora wrote: > > Hi all, > > I have a board with RedBoot + WinCE. > > What kind of a board is this?
It is a SODIMM board based on iMX25 and 2GB of Flash memory > > > I defined a Flash partition for wince and a 64MB partition > for storage. > > WinCE mounts correctly the 64MB storage partition. > > > > RedBoot> fis list > > Name FLASH addr Mem addr Length Entry point > > RedBoot 0x00000000 0x00000000 0x00040000 0x00000000 > > wince 0x00040000 0x80100000 0x01F00000 0xFFFFFFFF > > storage 0x01F40000 0x82000000 0x04000000 0xFFFFFFFF > > FIS directory 0x07F60000 0x07F60000 0x0001F000 0x00000000 > > RedBoot config 0x07F7F000 0x07F7F000 0x00001000 0x00000000 > > RedBoot> > > > > How can i define a 1GB Storage size? > > You'd have to have a 1GB device on your hardware platform - do you? Yes, of course :-) > > Do I need to define a RAM (Mem addr) size with the same > size of the storage area?? I have not so much RAM !?!?! > > No these are not related. The 'Mem addr' is simply the RAM > address that RedBoot will load an image into by default (when > the -b option is not used with 'fis load') So instead of: RedBoot> fis create -b 0x82000000 -r 0x82000000 -l 0x04000000 -s 0 -f 0x01f40000 storage i need to type: RedBoot> fis create -b 0x82000000 -r 0x82000000 -l 0x40000000 -s 0 -f 0x01f40000 storage I guess i should have problems with the locations of the RedBoot config & FIS directory partitions ... Maybe I could choose a different range of Flash addresses: RedBoot> fis create -b 0x82000000 -r 0x82000000 -l 0x04000000 -s 0 -f 0x10000000 storage ________________________________ Ing. Stefano Mora -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
