Hi John, I set the arm-none-eabi in Configuration -> Global build options -> Global command
now I am getting the following error, it says it cannot find file /ecos-3.0/packages/services/memalloc/common/v3_0/src/heapgen.cpp: No such file or directory but this file is present in packages/service/memalloc/common/v3/src but this is only.cpp file the rest of the files are .cxx (c++ file) why this change I cannot make out. Is there document which explains about the Configtool build library? _________________________________________________________________________________ strings -mcpu=cortex-m3 -mthumb -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -I/ecos-3.0/temp/stm32_install/include -I/ecos-3.0/packages/services/memalloc/common/v3_0 -I/ecos-3.0/packages/services/memalloc/common/v3_0/src -I/ecos-3.0/packages/services/memalloc/common/v3_0/tests -I. -Wp,-MD,heapgen.tmp -E /ecos-3.0/packages/services/memalloc/common/v3_0/src/heapgen.cpp -o heapgeninc.tcl make[1]: Leaving directory `/ecos-3.0/temp/stm32_build/services/memalloc/common/v3_0' arm-none-eabi-gcc.exe: /ecos-3.0/packages/services/memalloc/common/v3_0/src/heapgen.cpp: No such file or directory make: Leaving directory `/ecos-3.0/temp/stm32_build' arm-none-eabi-gcc.exe: no input files make[1]: *** [heapgeninc.tcl] Error 1 ________________________________________________________ Thanks Sridhar smolugu wrote: > > Hi John, > I set the arm-none-eabi in Configuration -> Global build options -> Global > command > > now I am getting the following error, it says it cannot find file > /ecos-3.0/packages/services/memalloc/common/v3_0/src/heapgen.cpp: No such > file or directory > but this file is present in packages/service/memalloc/common/v3/src but > this is only.cpp file the rest of the files are .cxx (c++ file) why this > change I cannot make out. > > Is there document which explains about the Configtool build library? > _________________________________________________________________________________ > strings -mcpu=cortex-m3 -mthumb -g -O2 -ffunction-sections -fdata-sections > -fno-rtti -fno-exceptions -I/ecos-3.0/temp/stm32_install/include > -I/ecos-3.0/packages/services/memalloc/common/v3_0 > -I/ecos-3.0/packages/services/memalloc/common/v3_0/src > -I/ecos-3.0/packages/services/memalloc/common/v3_0/tests -I. > -Wp,-MD,heapgen.tmp -E > /ecos-3.0/packages/services/memalloc/common/v3_0/src/heapgen.cpp -o > heapgeninc.tcl > make[1]: Leaving directory > `/ecos-3.0/temp/stm32_build/services/memalloc/common/v3_0' > arm-none-eabi-gcc.exe: > /ecos-3.0/packages/services/memalloc/common/v3_0/src/heapgen.cpp: No such > file or directory > make: Leaving directory `/ecos-3.0/temp/stm32_build' > arm-none-eabi-gcc.exe: no input files > make[1]: *** [heapgeninc.tcl] Error 1 > ________________________________________________________ > > Thanks > Sridhar > > > John Dallaway-2 wrote: >> >> Hi Sridhar >> >> smolugu wrote: >> >>> I try to build in the configuration tool for STM32, I set the build path >>> to >>> where I copied the arm-none-eabi tool chain i.e >>> C:\cygwin\ecos-3.0\arm_eabi_2009q3_63\arm-2009q3\bin. >>> >>> actually its asking for arm-eabi-gcc but I couldn't find I got the >>> package >>> for arm-none-eabi from >>> http://www.codesourcery.com/sgpp/lite/arm/portal/release1033. >>> I followed the steps to set tool >>> chaing->http://groups.google.com/group/python-on-a-chip/web/arm-toolchain-build?pli=1 >>> >>> after that when I build I get the following error. >>> ..... >>> make[1]: Leaving directory `/ecos-3.0/temp/stm32_build/fs/fat/v3_0' >>> headers finished >>> make -r -C services/memalloc/common/v3_0 heapgeninc.tcl >>> make[1]: Entering directory >>> `/ecos-3.0/temp/stm32_build/services/memalloc/common/v3_0' >>> arm-eabi-gcc -finline-limit=7000 -Wall -Wpointer-arith -Wundef >>> -Woverloaded-virtual -Wno-write-strings -mcpu=cortex-m3 -mthumb -g -O2 >>> -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions >>> -I/ecos-3.0/temp/stm32_install/include >>> -I/ecos-3.0/packages/services/memalloc/common/v3_0 >>> -I/ecos-3.0/packages/services/memalloc/common/v3_0/src >>> -I/ecos-3.0/packages/services/memalloc/common/v3_0/tests -I. >>> -Wp,-MD,heapgen.tmp -E >>> /ecos-3.0/packages/services/memalloc/common/v3_0/src/heapgen.cpp -o >>> heapgeninc.tcl >>> make[1]: Leaving directory >>> `/ecos-3.0/temp/stm32_build/services/memalloc/common/v3_0' >>> make[1]: arm-eabi-gcc: Command not found >>> make: Leaving directory `/ecos-3.0/temp/stm32_build' >>> make[1]: *** [heapgeninc.tcl] Error 127 >>> make: *** [build] Error 2 >>> >>> Please can you let me know where its going wrong. >> >> The eCos build system is looking for GNU tools with an "arm-eabi" >> command prefix. You will need to locate and modify the >> CYGBLD_GLOBAL_COMMAND_PREFIX option within the eCos Configuration Tool >> in order to use a toolchain with an "arm-none-eabi" command prefix. You >> will find the option at Configuration -> Global build options -> Global >> command prefix within the configuration tree. >> >> I hope this helps... >> >> John Dallaway >> eCos maintainer >> >> -- >> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos >> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss >> >> >> > > -- View this message in context: http://old.nabble.com/Problem-with-precompiled-Cygwin-arm-eabi-toolchain-tp21510048p27950958.html Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
