In the file ecos\packages\redboot\current\src\fconfig.c, I added this to have
the serial number:
#ifdef CYGSEM_REDBOOT_SERIAL_NUMBER
RedBoot_config_option("Serial number",
serial_number,
ALWAYS_ENABLED, true,
CONFIG_INT,
0
);
#endif
I think the order is just the order in which those calls to
"RedBoot_config_option" happen.
Success,
Jürgen
> -----Original Message-----
> From: ecos-discuss-ow...@ecos.sourceware.org [mailto:ecos-discuss-
> ow...@ecos.sourceware.org] On Behalf Of Elad Yosef
> Sent: woensdag 27 oktober 2010 13:00
> To: ecos-discuss@ecos.sourceware.org
> Subject: [ECOS] RedBoot Adding my parameters to the fconfig saved
> configuration.
>
> Hi all,
> I'm working on a new platform and want to add new parameters to the
> configuration that is saved in the "fconfig"
> How can i do it? Does the structure and order of the parameters is
> constant ? (i.e the ESA is always the second record in table)
>
> Also, can i dump the configuration into human readable file ? the
> other option is to dump the flash sector into hex file and use
> external tool, does anyone has such tool?
>
> Thanks
>
> Elad
>
> SW R&D
>
> --
> Before posting, please read the FAQ:
> http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
