Hello Christophe,
On 03/01/11 11:36, Christophe Coutand wrote:
My experience is that the PHY API of eCos only let you retrieve the PHY state (Link Mode) using _eth_phy_state() which you can further use for setting your MAC layer. If you should handle any specific link configuration or act on link mode change (from interrupt), you must write you own configuration function. _eth_phy_cfg seems to be a generic function which should be propagated to _eth_phy_dev_entry to have more flexibility.
Thank you for this information. I already thought I have to change the _eth_phy_dev entry. However it will be somewhat tricky to implement a real callback to the board specific code.
Thank you, Martin L.
Christophe -----Original Message----- From: ecos-discuss-ow...@ecos.sourceware.org [mailto:ecos-discuss-ow...@ecos.sourceware.org] On Behalf Of Martin Laabs Sent: 28. februar 2011 12:37 To: ecos-discuss@ecos.sourceware.org Subject: [ECOS] Ethernet PHY board specific configuration Hello, my eCos port to the AT91SAM9 family is mostly done. Now I want to configure the ethernet phy after it is recognized by ecos and before the MAC begins transmitting data. The cause is to configure the auto-negotiation mode and LED settings. As far as I know there is no such macro or callback defined yet. Is this correct and where should I add such a macro? Thank you, Martin Laabs
-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
