Hi Jesper Jesper K. Pedersen wrote:
> My challenge is that when I try to use the serial port example I get no > output (neither from the diag port or the serial ports). > > Diagnostic test indicate that the cyg_io_lookup exit with error code 1 > (EPERM) > > My environment were set up from default by performing the following > steps : > > ecosconfig new at91sam7sek > ecosconfig tree > ecosconfig check > make > > and then compiling and running the "serial.c" test The eCos serial tests require a relevant serial hardware driver to be enabled. You can do this by enabling the "Hardware serial device drivers" component (CYGPKG_IO_SERIAL_DEVICES) within the "Serial device drivers" package (CYGPKG_IO_SERIAL). The serial tests will use the serial device defined by the "Serial device used for testing" option (CYGPRI_SER_TEST_SER_DEV). I hope this helps. John Dallaway eCos maintainer http://www.dallaway.org.uk/john -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
