Thanks Ilija and Tomas for your answers, I will look at the existing code already implemented for other freescale platforms in eCos and try to write a driver for the flash memory of the k60. I'll keep you posted.
Regards, Nicolas Aujoux 2012/2/7 Ilija Kocho <ili...@siva.com.mk>: > On 07.02.2012 13:00, Tomas Frydrych wrote: >> >> On 07/02/12 10:44, Ilija Kocho wrote: >>> >>> Hi Nicolas >>> >>> Kinetis Flash (FTF) is not yet supported by eCos. >>> To answer your question: In order to be able to flash code from Redboot >>> we need a Flash driver for Kinetis FTF. >> >> It's not a particularly big task I think; the kinetis FTFL driver in >> openocd is under 600LOC of generously spaced code. > > > We should be careful openocd code in eCos since it is pure GPL. It can be > used, but only for open source applications. That being said, openocd code > can't be accepted in the eCos repository. > > Ilija > > >> >> Tomas >> >>> Ilija >>> >>> >>> On 07.02.2012 08:05, Nicolas Aujoux wrote: >>>> >>>> Hi list, >>>> >>>> I am currently working on a Kinetis k60N512 tower kit. I built a >>>> Redboot image with Ethernet support and load it via CodeWarrior. I >>>> have access to Redboot via both serial link or telnet but the mapping >>>> doesn’t show any flash memory so I can only load images into the Ram >>>> memory. >>>> >>>> What would be needed to be able to flash code with the redboot >>>> interface into the flash memory? >>>> >>>> Thanks for your help, >>>> >>>> Nicolas >>>> >>> >> > > > -- > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
