i tested using the gdb and here ae the output. (gdb) load Loading section .rom_vectors, size 0x40 lma 0x81010000 Loading section .text, size 0x41664 lma 0x81010040 Loading section .rodata, size 0x318c lma 0x810516a4 Loading section .data, size 0x1a14 lma 0x81054830 Start address 0x81010040, load size 287300 Transfer rate: 922 bytes/sec, 764 bytes/write. (gdb) run The "remote" target does not support "run". Try "help target" or "continue". (gdb) continue Continuing. [cyg_net_init] Init: mbinit(0x00000000) [cyg_net_init] Init: cyg_net_init_devs(0x00000000) Init device 'dm9000_eth0' [cyg_net_init] Init: loopattach(0x00000000) [cyg_net_init] Init: ifinit(0x00000000) [cyg_net_init] Init: domaininit(0x00000000) [cyg_net_init] Init: cyg_net_add_domain(0x81055e90) New domain internet at 0x00000000 [cyg_net_init] Init: cyg_net_add_domain(0x810556ac) New domain route at 0x00000000 [cyg_net_init] Init: call_route_init(0x00000000) [cyg_net_init] Done PASS:<httpd test finished> EXIT:<done>
i'm a beginner into this field. but i can't open the webpage at 192.168.2.30/monitor/index/html. i'm not quite understand. can you explain it to me? your help is really appreciated and thank you very much. -- View this message in context: http://old.nabble.com/web-simple-monitor-%28httpd%29-compiling-error-tp33429784p33440740.html Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
