> And there I go forgetting to include the list... never mind it happens. but yeah i was so busy trying to fix the problem couldn't find time to check anything else and now it's my pleasure to announce that I got it working. >> Yes, I see a LEON hal, but no mention of LEON3. Sounds like you are >> working from a very old port from some manufacturer that did not >> contribute the port back. Hence, it has been unmaintained.Perhaps you >> would be interested in updating it and contributing it. Mind you, I >> have no idea what level of effort that would entail from your starting >> place.
yea may be you are right since that port is not part of ecos latest release. And just to share how I solved it: I chose a different baud rate. So, I believe the strange behaviour had to do with physical media. Since the serial cable and PC work for quite a range of baud rates, so I believe it had to do with LEON3 processor support somehow. If someone could share more on the baud rates LEON3 supports I would appreciate. Thanks and Regards, Tayyaba Azeem ----- Original Message ----- > From: Michael Bergandi <mberga...@gmail.com> > To: tayyaba azeem <u04...@yahoo.com> > Cc: eCos Discuss List <ecos-discuss@ecos.sourceware.org> > Sent: Tuesday, March 20, 2012 5:59 PM > Subject: Re: [ECOS] Fw: strange UART behaviour while running ecos > > And there I go forgetting to include the list... > >> Tayyaba, >> >>> Thanks Mike but I solved it thank God. It's working now. >> >> Glad you got it working. Please make sure to reply all or copy the >> list so that others will know you solved your problem, so you don't >> waste someones time trying to help you. >> >>> Does eCos 3.0 support LEON3 may be I don't remember correctly so > I'll check again. It does support Leon though. >> >> Yes, I see a LEON hal, but no mention of LEON3. Sounds like you are >> working from a very old port from some manufacturer that did not >> contribute the port back. Hence, it has been unmaintained. Perhaps you >> would be interested in updating it and contributing it. Mind you, I >> have no idea what level of effort that would entail from your starting >> place. >> >> Carry on. Wishing you well on your development. >> >> Mike >> >> >> >> -- >> Mike > > > > -- > Mike > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
