Hello everybody, this is my first question to the list. I’m not able to run the ‘hello’ application sampled in Ecos v3.0. I’m working with a standard i386 PC as target on which I successfully installed GRUB and REDBOOT. When Redboot starts it shows:
Platform: PC (I386) RAM: 0x00100000-0x040F0000 [0x00195130-0x01000000] I built eCos using the “i386 PC target with RTL8139 ethernet” template and then the hello application from the examples. When I try to download via TFTP the ‘hello’ image, I got “Can’t load ELF File – program headers out of order”. While investigating, I realized the start address of the Redboot and of Hello are the same : 0x0108000. Here I’m confused. May I load the hello code everywhere in the available RAM ? Just to try, I loaded the image at 0x0208000 and the expected “Raw file loaded…:” show up. But when I gave the GO command nothing happened. Before to continue, am I doing right ? Thanks in advance. Fab -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
