Hi all, The good news: I have managed to build new image with the new packages specified. The bad news: I can't see the TCP + ETH threads in the threads list and fails to ping.
Can anyone guide me how to bring-up the LwIP properly? Elad On Sun, Jun 17, 2012 at 12:12 PM, John Dallaway <j...@dallaway.org.uk> wrote: > Hi Elad > > On 17/06/12 07:28, Elad Yosef wrote: > >> I'm using multiple threads in my application. >> The SYS_ARCH_PROTECT is not enabled at all. >> How do I enable it? >> Is it enabled in the current CVS version? >> Does the current LwIP in CVS is compatible with ecos-3.0? In yes I >> would consider upgrading LwIP package only > > You should be able to use lwIP 1.3.2 from eCos CVS with your eCos 3.0 > release repository just by copying packages/io/eth/current/ and > packages/net/lwip_tcpip/current/ into your eCos 3.0 repository. Any > _new_ eCos configurations will then use the "current" versions of these > packages rather than the "v3_0" versions. Any _previous_ eCos > configurations will continue to use the "v3_0" packages. > > I hope this helps... > > John Dallaway > eCos maintainer > http://www.dallaway.org.uk/john -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
