Hi yusuf You need to produce new platform port. For LPC17xx that should be easy.
1. Make a copy of LPC1766 platform and rename it accordingly. 2. Find LPC1766 entries in ecos.db and make respective LPC17xx entries. There are 2 entries, one for platform and one target. 3. Edit the files in tree produced by 1. 0. Porting is well described in eCos Reference Manual and Component Writer's Guide ( ref: http://ecos.sourceware.org/docs.html ) as well as in Masa's book Have fun. Ilija On 23.05.2013 09:27, yusuf.husainy wrote: > Hi all, > > I have just started with eCos recently. I am using a custom board with > LPC1769 on it. My requirement is that I have to build and port redboot to > the internal flash of LPC1769. This will then serve as a purpose to load any > other application(firmware or ecos linked application) to my board via the > ethernet connection or UART. > > So, I downloaded eCos3.0, and also ecos from anoncvs. Then I followed the > instructions told on that webpage and changed my repository to the anoncvs > one. export ECOS_REPOSITORY=/mnt/ecoCVS/ecos/packages. > > After that I executed the config tool for ecos3.0, and selected te Olimex > 1766-STK as my board. But, I need it for 1769, So, what I would like to know > is that, before building redboot(as selected from template menu), where > should I make some modifications so that I will be able to use my custom > board using LPC1769. > > Any help is appreciated. > > Regards, > Yusuf Husainy. > > > > -- > View this message in context: > http://sourceware-org.1504.n7.nabble.com/ecos-configuration-for-LPC1769-tp233012.html > Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com. > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
