Hi Ilja, I think it's the port which crashes...because the application contains only a simple counter. I did the clocking and hal_diag.c - are there any traps causing me stumble?The clocking I did is on the same way like it is described in examples of FM3 (where the clocks also get initialized). So I can't imagine that my fault depends on clocking.
Lukas Gesendet: Montag, 03. Juni 2013 um 21:49 Uhr Von: "Ilija Kocho" <ili...@siva.com.mk> An: "Lukas Riezler" <lukas.riez...@gmx.net> Cc: ecos-disc...@sourceware.org Betreff: Re: [ECOS] eCos application crashes On 03.06.2013 21:31, Lukas Riezler wrote: > Hi eCos-guys! > > I have a problem with my fm3 port. > When I start an eCos application first it seems to run fine...but after ~1 > second it crashes and restarts. > Do you have any idea what could be the reason for this behaviour? > I've tried to compile eCos without optimization ==> the first running was > okay! The application did run fine!!! > But when I started it a few minutes later it crashed again... Is it the application or the port that chrashes? Have you tried the application on some mature port? HTH Ilija -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss[http://ecos.sourceware.org/ml/ecos-discuss] -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
