Good evening, I have a question concerning the programming of the ethernet in eCos.
The current state is, that I can use some existent functions for the MAC of my Embedded System located in /devs/eth. They provide the possibility to access the hardware via HAL_WRITE(). The init function is used in the NETDEV_TAB macro. Additionally I wrote some drivers for the seperated PHY with the obligatory "phy_stat" function. When I started debugging I was very suprised, that either the init function of the mac nor some function of the PHY driver was used (I set a brakpoint there and nothing happens). So my question is: do I have to activate some other things to get the ethernet work? What possibilities are there to check the result? By the way: the plan is to use a third party TCP-stack later. Kind regards, Dennis -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
