On Fri, 2006-01-27 at 17:26 +0000, Will Wagner wrote: > Attached patch fixes errors with SMC config on an 866. If you tried to > use the SMC in any setting other than 8, none, 1 the CLEN field in SMCMR > was set incorrectly. > > Also added the beginnings of some basic error detection when the SMC > reports a frame or parity error. > > Tested on MPC866P hardware, all serial combinations with even/odd > parity, 1 or 2 stop bits, 7 or 8 data bits (had no hardware to test 5 & 6). >
Applied, thanks (indentation slightly reformatted) -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
