Sergei Gavrikov wrote:
I finished two eCos ports for new targets: Olimex LPC-E2294 development board and Olimex LPC-H2294 header board. Olimex LPC-E2294 does have CL CS8900A ethernet chip had been wired in a 8-bit mode by Olimex designers. Only with this minimal patch I get an ethernet support for the LPC-E2294. RedBoot for this board does an upload via tftp just pretty well in that 8-bit mode. If this patch will be committed, I send my ports for these boards. It's very important to fulfil all accesses to CL CS8900A registers via CS_IN(), CS_OUT() macros.
I think with this patch, and certainly with board port contributions, we will need a copyright assignment to be able to put these in eCos. Have a look at http://ecos.sourceware.org/patches.html and in particular http://ecos.sourceware.org/patches-assignment.html
I know it's a bit bureaucratic, but it's quite important as described on that page.
Jifl -- eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts ------["The best things in life aren't things."]------ Opinions==mine
