Tim michals <tcmichals <at> yahoo.com> writes: > > Ok, I have one working, I will attempt a merge etc. Thanks.,.... > > ----- Original Message ---- > From: Andrew Lunn <andrew <at> lunn.ch> > To: Wolfgang K?bler <wk <at> koebler.com> > Cc: Tim michals <tcmichals <at> yahoo.com>; ecos-patches <at> ecos.sourceware.org > Sent: Tuesday, October 17, 2006 11:51:35 AM > Subject: Re: ecos.db patches for at91sam7xek > > On Tue, Oct 17, 2006 at 12:34:11AM +0200, Wolfgang K?bler wrote: > > Hi, > > > > On 16-Oct-2006 Tim michals wrote: > > > I have a demo board so I can do some USB testing and move forward on > > > Ethernet.... > > Hint about Ethernet: > > The at91sam7x eth is similar, but not identical to at91rm9200 eth. > > I think they are similar enough so that the driver can be based on one > > common source file (with conditional compilation). I think this would be > > better than two seperate drivers. Whoever writes an eth driver for one of the > > chips should have a look at the other chip. > > This was my plan. However i got side tracked and have not worked on > the ethernet driver for over a month. I know John Eigelaar was also > working in this area, but he has gone quiet recently, so i've no idea > how far he has got. > > Andrew > >
hi all i am also working on this ecos. i have to enable the network on the AT91RM9200 development kit. But i am facing sum problem. whenevr i tries to ping the board it says request timed out.But if redboot is loaded at that time ping is sucessful but when i run my application and at that time i tries to ping i am facing the problem ie i m not able to ping. kindly suggest me the way out, if possible. Thanks neha
