John Dallaway wrote: > Hi Gary > > Your configtool-gcc-4.x.x.patch is fine. Feel free to check it in > (without the commented out class names) or I can do it if you prefer.
Thanks, I'll take care of it. > I do not need your configtool-gcc-3.4.x.patch to build configtool with > GCC 4.1.1 on Linux. Perhaps you have other changes in your source code > which require this? I don't think so, but I'll check. I had that patch around for quite a while - I'll see if it's still necessary. Thanks again > -------- Original Message -------- > Subject: Building ConfigTool with GCC 4.x.x > Date: Wed, 24 Oct 2007 06:55:45 -0600 > From: Gary Thomas <[EMAIL PROTECTED]> > To: eCos patches <[email protected]> > Newsgroups: gmane.os.ecos.patches > > I just tried to build the config tool using GCC 4.2.1 and > had some problems. > > The changes I needed are attached. I'm not a C++ guru, so > please comment on them (I purposefully left the problem > sections in comments) and let me know the best way to fix > it. The tool runs fine with the changes I made. > > Note: there are two changes here. One I previously found when > building with GCC-3.4.x and the latest one which is necessary > when using GCC-4.2.x > > Thanks -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
