On Thu, 27 May 2010, Christophe Coutand wrote:
Hi Sergei,
I have attached an updated var_io.h that includes ADC support for the
AT91M55800A. I took the opportunity to define the number of channels
per ADC in this file. It can be overwritten per platform basis since
AT91SAM7L64 for instance has 4 channels only.
Hi Christophe,
Thanks for your time. I will take a look this morning.
The definition of AT91_MAX_ADC_CHAN must be removed from
devs/adc/arm/at91/current/src/adc_at91.c. I have not joined any patch
for it since I will hopefully submit a new driver that support both
ADCs.
Excellent! I did want to ask you about and it seems fetchamil is
retrieving it just now.
Sergei
Christophe
-----Original Message-----
From: Sergei Gavrikov [mailto:[email protected]]
Sent: 27. mai 2010 18:38
To: Christophe Coutand
Cc: John Dallaway; eCos Patches
Subject: RE: AT91 ADC support
On Thu, 27 May 2010, Christophe Coutand wrote:
Hi John,
It's pretty easy to add the required definition for the AT91M55800A
targets. The only thing I see now is that this device contains 2 ADCs
which I have not considered before. I guess there are several ways out
of this:
1- Update the actual AT91 ADC driver to make full use of the
AT91M55800A targets. I guess should be done by loading a second ADC
instance (one for each ADC. I have not been through all the thinking
here...).
2- or limit the AT91 driver to use only ADC0 of the AT91M55800A target
for the time being.
3- or exclude AT91M55800A targets for the time being.
IMO #1 is best but I cannot give any time frame for completing it.
Hi Christophe, John
I would prefer #1, if you want I can add that in AT91/ADC CDL/sources.
One thing: I won't be able to test it on real hardware (only build
process can be tested me).
John, what do you think: Can we add the second ADC instance without a
testing?
One additional weakness of the driver is that it is made for up to 8
channels. It is defined nowhere what the targeted CPU can actually
handle, this is left to the user when configuring eCos. I believe this
is pretty fine since the user must anyway know which signal he wants
to
sample but you might disagree on that one.
I know only one target which would use all 8 channels :-) That's eCos
i386/Linux synthetic target.
Thanks for collaboration.
Sergei
Regards,
Christophe
