Hi Peter Peter Huszar wrote:
> I have attached the source code. Please let me know if > you cosider it sufficiently modified to warrant > a copyright assigment. Your code will certainly require a copyright assignment. I recommend that you start the process as soon as possible as it can take some time. You should be able to generate a patch using something like this from a bash prompt: cd packages/dev/adc/arm/lpc24xx/current diff -U5 src/adc_lpc24xx.c src/adc_lpc2xxx.c > adc_lpc2xxx.patch diff -U5 cdl/adc_lpc24xx.cdl cdl/adc_lpc2xxx.cdl >> adc_lpc2xxx.patch Can you post the resulting patch file to the ecos-patches list please? John Dallaway eCos maintainer > -----Original Message----- > From: John Dallaway [mailto:[email protected]] > Sent: Monday, June 28, 2010 11:54 AM > To: Peter Huszar > Cc: eCos Patches List > Subject: Re: LPC2XXX ADC modification > > Hi Peter > > Peter Huszar wrote: > >> I have noticed that the Olimex H2294 board support includes an ADC that is >> specific to some versios of LPC2XXX processors. >> It only covers models that have individual conversion registers (LPC24XX >> and LPC21XX/LPC22XX with 01 suffix). >> >> I have modified the ADC driver to support all LPC ADC configurations. >> >> Please let me know if this is of any interest to the eCOS maintainers >> and/or the eCOS community. >> >> If interested, please let me know how to go about contributing the >> modified ADC code and package information. >> I have tested the configurations that I am using, but would only do more >> generic test if there is interest from the community. > > Thank you for your interest in contributing your ADC driver changes. > > Extended hardware support is always of interest. If the patch is just a > few lines we may be able to accept it without a copyright assignment, > otherwise you will need to complete copyright paperwork as described at: > > http://ecos.sourceware.org/assign.html > > Could you post your patch to [email protected] so we can > advise further? > > John Dallaway > eCos maintainer
