Please do not reply to this email. Use the web interface provided at: http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001115
--- Comment #3 from Ilija Kocho <[email protected]> 2011-01-18 13:02:05 GMT --- (In reply to comment http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001114#c12) Sorry for jumping into another bug but I think it is for good reason. > > For each affected package, we could optionally change the CDL "display" and > "description" strings and the zeroth package "alias" string in ecos.db > (displayed by configtool) to make them more generic. We should not change any > CDL macro names or the API. Talking about "description" there is one issue for which I planned to ask for help but I forgot. It affects: http://bugs.ecos.sourceware.org/attachment.cgi?id=1079 and http://bugs.ecos.sourceware.org/attachment.cgi?id=1080 Descriptions for interrupt priority look like this: description " This option selects the interrupt priority for the EMAC interrupts. There are CYGNUM_DEVS_ETH_IRQ_PRIORITY_LEVELS priority levels corresponding to the values 0 through CYGNUM_DEVS_ETH_IRQ_PRIORITY_LEVELS-1 decimal, of which the highest value is the lowest priority. The reset value of these registers defaults all interrupts to the lowest priority, allowing a single write to elevate the priority of an individual interrupt." I know that this is less than perfect, but with my limited knowledge of tcl/CDL I failed to find a way to enforce substitution of CYGNUM_DEVS_ETH_IRQ_PRIORITY_LEVELS. I tried something like "xxx" . CYGNUM_DEVS_ETH_IRQ_PRIORITY_LEVELS . "xxx" and some other combinations involving braces and brackets. Hope there is a way to do it. -- Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
