Please do not reply to this email. Use the web interface provided at: http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001291
--- Comment #24 from Ilija Kocho <[email protected]> 2011-11-14 22:31:31 GMT --- (In reply to comment #22) > Correct, CYGNUM_HAL_KERNEL_COUNTERS_CLOCK_ISR_DEFAULT_PRIORITY is not set to > the lowest priority, i can fix that. > > For debugging the smartfusion kit, there are several alternatives. Out of the > box, without additional HW, the USB interface as described in all > smartfusion tutorials is used. This method requires the tools provided by > Actel > (SoftConsole IDE (Eclipse), Actel flashpro driver and ARM GDB and > Sprite utilities from CodeSourcery). This default debugging setup requires a > special ROM startup type where the FLASH load address is set to 0x60000000 > and > the virtual address is set to 0x00000000. Since I also wanted to keep regular > ROM startup type for developer using the JTAG interface, I have introduced the > CDL > CYG_HAL_PLF_STARTUP. Both ROM_SOFTCONSOLE and ROM type leads to use > CYG_HAL_STARTUP=ROM, which is required by the architectural HAL. OK, So, although construction resembles, you were solving different problem. I think with little tweaking it is possible to score both goals. > > Christophe -- Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
