Revision: 15796
http://sourceforge.net/p/edk2/code/15796
Author: lgao4
Date: 2014-08-13 08:39:54 +0000 (Wed, 13 Aug 2014)
Log Message:
-----------
Add the missing parameter comments for BaseSerialPortLib16550 lib. MdePkg: Fix
Clang build failure
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <[email protected]>
Modified Paths:
--------------
trunk/edk2/MdeModulePkg/Include/Ppi/SerialPortPei.h
trunk/edk2/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
Modified: trunk/edk2/MdeModulePkg/Include/Ppi/SerialPortPei.h
===================================================================
--- trunk/edk2/MdeModulePkg/Include/Ppi/SerialPortPei.h 2014-08-13 06:31:08 UTC
(rev 15795)
+++ trunk/edk2/MdeModulePkg/Include/Ppi/SerialPortPei.h 2014-08-13 08:39:54 UTC
(rev 15796)
@@ -13,8 +13,8 @@
**/
-#ifndef _PEI_SERIAL_PORT_PPI_H
-#define _PEI_SERIAL_PORT_PPI_H
+#ifndef __PEI_SERIAL_PORT_PPI_H__
+#define __PEI_SERIAL_PORT_PPI_H__
#define PEI_SERIAL_PORT_PPI \
{ \
Modified:
trunk/edk2/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
===================================================================
---
trunk/edk2/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
2014-08-13 06:31:08 UTC (rev 15795)
+++
trunk/edk2/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
2014-08-13 08:39:54 UTC (rev 15796)
@@ -63,6 +63,7 @@
parameter Offset is added to the base address of the 16550 registers that is
specified
by PcdSerialRegisterBase.
+ @param Base The base address register of UART device.
@param Offset The offset of the 16550 register to read.
@return The value read from the 16550 register.
@@ -87,6 +88,7 @@
parameter Offset is added to the base address of the 16550 registers that is
specified
by PcdSerialRegisterBase.
+ @param Base The base address register of UART device.
@param Offset The offset of the 16550 register to write.
@param Value The value to write to the 16550 register specified by Offset.
@@ -173,7 +175,7 @@
This function assumes Root Bus Numer is Zero, and enables I/O and MMIO in
PCI UART
Device if they are not already enabled.
- @return The base address register of the PCI UART device.
+ @return The base address register of the UART device.
**/
UINTN
@@ -411,6 +413,8 @@
/**
Return whether the hardware flow control signal allows writing.
+ @param SerialRegisterBase The base address register of UART device.
+
@retval TRUE The serial port is writable.
@retval FALSE The serial port is not writable.
**/
This was sent by the SourceForge.net collaborative development platform, the
world's largest Open Source development site.
------------------------------------------------------------------------------
_______________________________________________
edk2-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-commits
