Revision: 16373
http://sourceforge.net/p/edk2/code/16373
Author: jljusten
Date: 2014-11-14 00:37:26 +0000 (Fri, 14 Nov 2014)
Log Message:
-----------
OvmfPkg: PlatformPei: Platform specific ACPI power management setup
Set up ACPI power management using registers determined based on
the underlying (PIIX4 or Q35/MCH) platform type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Reviewed-by: Jordan Justen <[email protected]>
Reviewed-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Laszlo Ersek <[email protected]>
Modified Paths:
--------------
trunk/edk2/OvmfPkg/PlatformPei/Platform.c
Modified: trunk/edk2/OvmfPkg/PlatformPei/Platform.c
===================================================================
--- trunk/edk2/OvmfPkg/PlatformPei/Platform.c 2014-11-14 00:37:16 UTC (rev
16372)
+++ trunk/edk2/OvmfPkg/PlatformPei/Platform.c 2014-11-14 00:37:26 UTC (rev
16373)
@@ -35,6 +35,7 @@
#include <Guid/MemoryTypeInformation.h>
#include <Ppi/MasterBootMode.h>
#include <IndustryStandard/Pci22.h>
+#include <OvmfPlatforms.h>
#include "Platform.h"
#include "Cmos.h"
@@ -228,6 +229,11 @@
VOID
)
{
+ UINT16 HostBridgeDevId;
+ UINTN PmCmd;
+ UINTN Pmba;
+ UINTN PmRegMisc;
+
//
// Disable A20 Mask
//
@@ -239,33 +245,48 @@
BuildCpuHob (36, 16);
//
+ // Query Host Bridge DID to determine platform type
+ //
+ HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
+ switch (HostBridgeDevId) {
+ case INTEL_82441_DEVICE_ID:
+ PmCmd = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
+ Pmba = POWER_MGMT_REGISTER_PIIX4 (0x40);
+ PmRegMisc = POWER_MGMT_REGISTER_PIIX4 (0x80);
+ break;
+ case INTEL_Q35_MCH_DEVICE_ID:
+ PmCmd = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
+ Pmba = POWER_MGMT_REGISTER_Q35 (0x40);
+ PmRegMisc = POWER_MGMT_REGISTER_Q35 (0x80);
+ break;
+ default:
+ DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
+ __FUNCTION__, HostBridgeDevId));
+ ASSERT (FALSE);
+ return;
+ }
+
+ //
// If PMREGMISC/PMIOSE is set, assume the ACPI PMBA has been configured (for
// example by Xen) and skip the setup here. This matches the logic in
// AcpiTimerLibConstructor ().
//
- if ((PciRead8 (PCI_LIB_ADDRESS (0, 1, 3, 0x80)) & 0x01) == 0) {
+ if ((PciRead8 (PmRegMisc) & 0x01) == 0) {
//
// The PEI phase should be exited with fully accessibe PIIX4 IO space:
// 1. set PMBA
//
- PciAndThenOr32 (
- PCI_LIB_ADDRESS (0, 1, 3, 0x40),
- (UINT32) ~0xFFC0,
- PcdGet16 (PcdAcpiPmBaseAddress)
- );
+ PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));
//
// 2. set PCICMD/IOSE
//
- PciOr8 (
- PCI_LIB_ADDRESS (0, 1, 3, PCI_COMMAND_OFFSET),
- EFI_PCI_COMMAND_IO_SPACE
- );
+ PciOr8 (PmCmd, EFI_PCI_COMMAND_IO_SPACE);
//
// 3. set PMREGMISC/PMIOSE
//
- PciOr8 (PCI_LIB_ADDRESS (0, 1, 3, 0x80), 0x01);
+ PciOr8 (PmRegMisc, 0x01);
}
}
------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
_______________________________________________
edk2-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-commits
