Revision: 16816
http://sourceforge.net/p/edk2/code/16816
Author: jcarsey
Date: 2015-02-06 22:25:05 +0000 (Fri, 06 Feb 2015)
Log Message:
-----------
Shellpkg: Fix spelling errors in Shell.c/Shell.h comments
This patch fixes spelling errors in comments. No functional change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Joe Peterson <[email protected]>
Reviewed-by: Jaben Carsey <[email protected]>
Modified Paths:
--------------
trunk/edk2/ShellPkg/Application/Shell/Shell.c
trunk/edk2/ShellPkg/Application/Shell/Shell.h
Modified: trunk/edk2/ShellPkg/Application/Shell/Shell.c
===================================================================
--- trunk/edk2/ShellPkg/Application/Shell/Shell.c 2015-02-06 21:03:28 UTC
(rev 16815)
+++ trunk/edk2/ShellPkg/Application/Shell/Shell.c 2015-02-06 22:25:05 UTC
(rev 16816)
@@ -123,7 +123,7 @@
Temp = StrStr(SourceString, FindString);
//
- // If nothing found, or we dont care about escape characters
+ // If nothing found, or we don't care about escape characters
//
if (Temp == NULL || !CheckForEscapeCharacter) {
return (Temp);
@@ -143,7 +143,7 @@
}
/**
- Check whether the string between a pair of % is a valid envifronment
variable name.
+ Check whether the string between a pair of % is a valid environment variable
name.
@param[in] BeginPercent pointer to the first percent.
@param[in] EndPercent pointer to the last percent.
@@ -245,7 +245,7 @@
feature's enabled state was not known when the shell initially launched.
@retval EFI_SUCCESS The feature is enabled.
- @retval EFI_OUT_OF_RESOURCES There is not enough mnemory available.
+ @retval EFI_OUT_OF_RESOURCES There is not enough memory available.
**/
EFI_STATUS
EFIAPI
@@ -684,7 +684,7 @@
/**
Sets all the alias' that were registered with the ShellCommandLib library.
- @retval EFI_SUCCESS all init commands were run sucessfully.
+ @retval EFI_SUCCESS all init commands were run successfully.
**/
EFI_STATUS
EFIAPI
@@ -769,10 +769,10 @@
loaded image protocol installed on it. The FilePath will point to the
device path
for the file that was loaded.
- @param[in, out] DevPath On a sucessful return the device path to the
loaded image.
- @param[in, out] FilePath On a sucessful return the device path to the
file.
+ @param[in, out] DevPath On a successful return the device path to the
loaded image.
+ @param[in, out] FilePath On a successful return the device path to the
file.
- @retval EFI_SUCCESS The 2 device paths were sucessfully returned.
+ @retval EFI_SUCCESS The 2 device paths were successfully returned.
@retval other A error from gBS->HandleProtocol.
@sa HandleProtocol
@@ -979,7 +979,7 @@
) == 0) {
ShellInfoObject.ShellInitSettings.BitUnion.Bits.Exit = TRUE;
} else if (StrnCmp (L"-", CurrentArg, 1) == 0) {
- // Unrecognised option
+ // Unrecognized option
ShellPrintHiiEx(-1, -1, NULL,
STRING_TOKEN (STR_GEN_PROBLEM),
ShellInfoObject.HiiHandle,
@@ -1167,7 +1167,7 @@
FileStringPath = ShellFindFilePath(mStartupScript);
if (FileStringPath == NULL) {
//
- // we return success since we dont need to have a startup script
+ // we return success since we don't need to have a startup script
//
Status = EFI_SUCCESS;
ASSERT(FileHandle == NULL);
@@ -1349,7 +1349,7 @@
SecondPercent = FirstPercent!=NULL?FindNextInstance(FirstPercent+1, L"%",
TRUE):NULL;
if (FirstPercent == NULL || SecondPercent == NULL) {
//
- // If we ever dont have 2 % we are done.
+ // If we ever don't have 2 % we are done.
//
break;
}
@@ -1381,7 +1381,7 @@
//
CopyMem(FirstPercent, SecondPercent + 1, StrSize(SecondPercent + 1));
//
- // dont need to update the locator. both % characters are gone.
+ // don't need to update the locator. both % characters are gone.
//
} else {
CurrentLocator = SecondPercent + 1;
@@ -1401,7 +1401,7 @@
@param[in] OriginalCommandLine The original command line
- @retval NULL An error ocurred.
+ @retval NULL An error occurred.
@return The new command line with no environment
variables present.
**/
CHAR16*
@@ -1442,7 +1442,7 @@
; Temp = StrStr(Temp+1, AliasListNode->Alias)
){
//
- // we need a preceeding and if there is space no ^ preceeding (if no
space ignore)
+ // we need a preceding and if there is space no ^ preceding (if no
space ignore)
//
if ((((Temp-OriginalCommandLine)>2) && *(Temp-2) != L'^') ||
((Temp-OriginalCommandLine)<=2)) {
NewSize += StrSize(AliasListNode->CommandString);
@@ -1463,7 +1463,7 @@
; Temp = StrStr(Temp+1, MasterEnvList)
){
//
- // we need a preceeding and following % and if there is space no ^
preceeding (if no space ignore)
+ // we need a preceding and following % and if there is space no ^
preceding (if no space ignore)
//
if (*(Temp-1) == L'%' && *(Temp+StrLen(MasterEnvList)) == L'%' &&
((((Temp-OriginalCommandLine)>2) && *(Temp-2) != L'^') ||
((Temp-OriginalCommandLine)<=2))) {
@@ -1505,7 +1505,7 @@
}
//
- // Remove non-existant environment variables
+ // Remove non-existent environment variables
//
StripUnreplacedEnvironmentVariables(NewCommandLine1);
@@ -1902,7 +1902,7 @@
@param[in] CmdLine pointer to the command line to process
@retval EFI_SUCCESS The operation was successful
- @return an error occured.
+ @return an error occurred.
**/
EFI_STATUS
EFIAPI
@@ -2058,7 +2058,7 @@
@retval EFI_SUCCESS The operation was successful
@retval EFI_OUT_OF_RESOURCES A memory allocation failed.
- @return some other error occured
+ @return some other error occurred
**/
EFI_STATUS
EFIAPI
@@ -2103,7 +2103,7 @@
/**
Run an internal shell command.
- This API will upadate the shell's environment since these commands are
libraries.
+ This API will update the shell's environment since these commands are
libraries.
@param[in] CmdLine the command line to run.
@param[in] FirstParameter the first parameter on the command line
@@ -2181,13 +2181,13 @@
}
//
- // This is guarenteed to be called after UpdateArgcArgv no matter what else
happened.
+ // This is guaranteed to be called after UpdateArgcArgv no matter what else
happened.
// This is safe even if the update API failed. In this case, it may be a
no-op.
//
RestoreArgcArgv(ParamProtocol, &Argv, &Argc);
//
- // If a script is running and the command is not a scipt only command, then
+ // If a script is running and the command is not a script only command, then
// change return value to success so the script won't halt (unless aborted).
//
// Script only commands have to be able halt the script since the script will
@@ -2425,7 +2425,7 @@
// NULL out comments (leveraged from RunScriptFileHandle() ).
// The # character on a line is used to denote that all characters on the
same line
// and to the right of the # are to be ignored by the shell.
- // Afterward, again remove spaces, in case any were between the last
command-parameter and '#'.
+ // Afterwards, again remove spaces, in case any were between the last
command-parameter and '#'.
//
for (TempWalker = CleanOriginal; TempWalker != NULL && *TempWalker !=
CHAR_NULL; TempWalker++) {
if (*TempWalker == L'^') {
@@ -2454,7 +2454,7 @@
}
//
- // We dont do normal processing with a split command line (output from one
command input to another)
+ // We don't do normal processing with a split command line (output from one
command input to another)
//
if (ContainsSplit(CleanOriginal)) {
Status = ProcessNewSplitCommandLine(CleanOriginal);
@@ -2505,7 +2505,7 @@
STATIC CONST UINT16 InvalidChars[] = {L'*', L'?', L'<', L'>', L'\\', L'/',
L'\"', 0x0001, 0x0002};
/**
- Function determins if the CommandName COULD be a valid command. It does not
determine whether
+ Function determines if the CommandName COULD be a valid command. It does
not determine whether
this is a valid command. It only checks for invalid characters.
@param[in] CommandName The name to check
@@ -2541,7 +2541,7 @@
@param[in] Handle The handle to the already opened file.
@param[in] Name The name of the script file.
- @retval EFI_SUCCESS the script completed sucessfully
+ @retval EFI_SUCCESS the script completed successfully
**/
EFI_STATUS
EFIAPI
@@ -2837,7 +2837,7 @@
@param[in] CmdLine the command line to run.
@param[in] ParamProtocol the shell parameters protocol pointer
- @retval EFI_SUCCESS the script completed sucessfully
+ @retval EFI_SUCCESS the script completed successfully
**/
EFI_STATUS
EFIAPI
@@ -2885,7 +2885,7 @@
}
//
- // This is guarenteed to be called after UpdateArgcArgv no matter what else
happened.
+ // This is guaranteed to be called after UpdateArgcArgv no matter what else
happened.
// This is safe even if the update API failed. In this case, it may be a
no-op.
//
RestoreArgcArgv(ParamProtocol, &Argv, &Argc);
@@ -2894,7 +2894,7 @@
}
/**
- Return the pointer to the first occurance of any character from a list of
characters.
+ Return the pointer to the first occurrence of any character from a list of
characters.
@param[in] String the string to parse
@param[in] CharacterList the list of character to look for
Modified: trunk/edk2/ShellPkg/Application/Shell/Shell.h
===================================================================
--- trunk/edk2/ShellPkg/Application/Shell/Shell.h 2015-02-06 21:03:28 UTC
(rev 16815)
+++ trunk/edk2/ShellPkg/Application/Shell/Shell.h 2015-02-06 22:25:05 UTC
(rev 16816)
@@ -139,7 +139,7 @@
@retval EFI_SUCCESS The operation was successful
@retval EFI_OUT_OF_RESOURCES A memory allocation failed.
- @return some other error occured
+ @return some other error occurred
**/
EFI_STATUS
EFIAPI
@@ -161,7 +161,7 @@
/**
Sets all the alias' that were registered with the ShellCommandLib library.
- @retval EFI_SUCCESS all init commands were run sucessfully.
+ @retval EFI_SUCCESS all init commands were run successfully.
**/
EFI_STATUS
EFIAPI
@@ -175,10 +175,10 @@
loaded image protocol installed on it. the FilePath will point to the
device path
for the file that was loaded.
- @param[in, out] DevPath on a sucessful return the device path to the
loaded image
- @param[in, out] FilePath on a sucessful return the device path to the
file
+ @param[in, out] DevPath on a successful return the device path to the
loaded image
+ @param[in, out] FilePath on a successful return the device path to the
file
- @retval EFI_SUCCESS the 2 device paths were sucessfully returned.
+ @retval EFI_SUCCESS the 2 device paths were successfully returned.
@return other a error from gBS->HandleProtocol
@sa HandleProtocol
@@ -294,7 +294,7 @@
);
/**
- Function determins if the CommandName COULD be a valid command. It does not
determine whether
+ Function determines if the CommandName COULD be a valid command. It does
not determine whether
this is a valid command. It only checks for invalid characters.
@param[in] CommandName The name to check
@@ -314,7 +314,7 @@
@param[in] Handle The handle to the already opened file.
@param[in] Name The name of the script file.
- @retval EFI_SUCCESS the script completed sucessfully
+ @retval EFI_SUCCESS the script completed successfully
**/
EFI_STATUS
EFIAPI
@@ -331,7 +331,7 @@
@param[in] CmdLine the command line to run.
@param[in] ParamProtocol the shell parameters protocol pointer
- @retval EFI_SUCCESS the script completed sucessfully
+ @retval EFI_SUCCESS the script completed successfully
**/
EFI_STATUS
EFIAPI
@@ -343,7 +343,7 @@
);
/**
- Return the pointer to the first occurance of any character from a list of
characters.
+ Return the pointer to the first occurrence of any character from a list of
characters.
@param[in] String the string to parse
@param[in] CharacterList the list of character to look for
------------------------------------------------------------------------------
Dive into the World of Parallel Programming. The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________
edk2-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-commits
