Revision: 16850
http://sourceforge.net/p/edk2/code/16850
Author: zwei4
Date: 2015-02-13 04:35:39 +0000 (Fri, 13 Feb 2015)
Log Message:
-----------
Add patch-able PCD in platform DSC to support binary modification of MRC
module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Wei <[email protected]>
Modified Paths:
--------------
branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgGccX64.dsc
branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgIA32.dsc
branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgX64.dsc
Modified: branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgGccX64.dsc
===================================================================
--- branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgGccX64.dsc
2015-02-13 02:33:26 UTC (rev 16849)
+++ branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgGccX64.dsc
2015-02-13 04:35:39 UTC (rev 16850)
@@ -680,6 +680,126 @@
# Note this PCD could be set to TRUE for best boot performance and set to
FALSE for best device compatibility.
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdFastPS2Detection|TRUE
+
#######################################################################################################
+ #
+ # Begin of MRC parameters
+ #
+
+ ## Memory Parameter Patchable.
+ # FALSE - MRC Parameters are fixed for MinnowBoard Max<BR>
+ # TRUE - MRC Parameters are patchable by following PCDs<BR>
+ # @Prompt Memory Parameter Patchable.
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdMemoryParameterPatchable|FALSE
+
+ ## Memory Down or DIMM slot.
+ # 0 - DIMM<BR>
+ # 1 - Memory Down<BR>
+ # @Prompt Enable Memory Down
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdEnableMemoryDown|1
+
+ ## The speed of DRAM.
+ # 0 - 800 MHz<BR>
+ # 1 - 1066 MHz<BR>
+ # 2 - 1333 MHz<BR>
+ # 3 - 1600 MHz<BR>
+ # @Prompt DRAM Speed
+ # @ValidList 0x80000001 | 0, 1, 2, 3
+ gVlvRefCodePkgTokenSpaceGuid.PcdDramSpeed|1
+
+ ## DRAM Type.
+ # 0 - DDR3<BR>
+ # 1 - DDR3L<BR>
+ # 2 - DDR3U<BR>
+ # 3 - DDR3All<BR>
+ # 4 - LPDDR2<BR>
+ # 5 - LPDDR3<BR>
+ # 6 - DDR4<BR>
+ # @Prompt DRAM Type
+ # @ValidList 0x80000001 | 0, 1, 2, 3, 4, 5, 6
+ gVlvRefCodePkgTokenSpaceGuid.PcdDramType|1
+
+ ## Please populate DIMM slot 0 if only one DIMM is supported.
+ # 0 - Disable<BR>
+ # 1 - Enable<BR>
+ # @Prompt DIMM 0 Enable
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdEnableDimm0|1
+
+ ## DIMM 1 has to be identical to DIMM 0.
+ # 0 - Disable<BR>
+ # 1 - Enable<BR>
+ # @Prompt DIMM 1 Enable Type
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdEnableDimm1|0
+
+ ## DRAM device data width.
+ # 0 - x8<BR>
+ # 1 - x16<BR>
+ # 2 - x32<BR>
+ # @Prompt DIMM_DWIDTH
+ # @ValidList 0x80000001 | 0, 1, 2
+ gVlvRefCodePkgTokenSpaceGuid.PcdDimmDataWidth|1
+
+ ## DRAM device data density.
+ # 0 - 1 Gbit<BR>
+ # 1 - 2 Gbit<BR>
+ # 2 - 4 Gbit<BR>
+ # 3 - 8 Gbit<BR>
+ # @Prompt DIMM_Density
+ # @ValidList 0x80000001 | 0, 1, 2, 3
+ gVlvRefCodePkgTokenSpaceGuid.PcdDimmDensity|2
+
+ ## DRAM device data bus width.
+ # 0 - 8 bits<BR>
+ # 1 - 16 bits<BR>
+ # 2 - 32 bits<BR>
+ # 3 - 64 bits<BR>
+ # @Prompt DIMM_BusWidth
+ # @ValidList 0x80000001 | 0, 1, 2, 3
+ gVlvRefCodePkgTokenSpaceGuid.PcdDimmBusWidth|3
+
+ ## Ranks Per DIMM or Sides Per DIMM.
+ # 0 - 1 Rank<BR>
+ # 1 - 2 Ranks<BR>
+ # @Prompt DIMM_Sides
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdRankPerDimm|0
+
+ ## tCL.<BR><BR>
+ # @Prompt tCL
+ gVlvRefCodePkgTokenSpaceGuid.PcdTcl|11
+
+ ## tRP and tRCD in DRAM clk - 5:12.5ns, 6:15ns, etc.
+ # @Prompt tRP_tRCD
+ gVlvRefCodePkgTokenSpaceGuid.PcdTrpTrcd|11
+
+ ## tWR in DRAM clk.
+ # @Prompt tWR
+ gVlvRefCodePkgTokenSpaceGuid.PcdTwr|12
+
+ ## tWTR in DRAM clk.
+ # @Prompt tWTR
+ gVlvRefCodePkgTokenSpaceGuid.PcdTwtr|6
+
+ ## tRRD in DRAM clk.
+ # @Prompt tRRD
+ gVlvRefCodePkgTokenSpaceGuid.PcdTrrd|6
+
+ ## tRTP in DRAM clk.
+ # @Prompt tRTP
+ gVlvRefCodePkgTokenSpaceGuid.PcdTrtp|6
+
+ ## tFAW in DRAM clk.
+ # @Prompt tFAW
+ gVlvRefCodePkgTokenSpaceGuid.PcdTfaw|32
+
+ #
+ # End of MRC parameters.
+ #
+
###############################################################################################
+
[PcdsDynamicHii.common.DEFAULT]
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|5
# Variable: L"Timeout"
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|L"HwErrRecSupport"|gEfiGlobalVariableGuid|0x0|1
# Variable: L"HwErrRecSupport"
Modified: branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgIA32.dsc
===================================================================
--- branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgIA32.dsc 2015-02-13
02:33:26 UTC (rev 16849)
+++ branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgIA32.dsc 2015-02-13
04:35:39 UTC (rev 16850)
@@ -680,6 +680,126 @@
# Note this PCD could be set to TRUE for best boot performance and set to
FALSE for best device compatibility.
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdFastPS2Detection|TRUE
+
#######################################################################################################
+ #
+ # Begin of MRC parameters
+ #
+
+ ## Memory Parameter Patchable.
+ # FALSE - MRC Parameters are fixed for MinnowBoard Max<BR>
+ # TRUE - MRC Parameters are patchable by following PCDs<BR>
+ # @Prompt Memory Parameter Patchable.
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdMemoryParameterPatchable|FALSE
+
+ ## Memory Down or DIMM slot.
+ # 0 - DIMM<BR>
+ # 1 - Memory Down<BR>
+ # @Prompt Enable Memory Down
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdEnableMemoryDown|1
+
+ ## The speed of DRAM.
+ # 0 - 800 MHz<BR>
+ # 1 - 1066 MHz<BR>
+ # 2 - 1333 MHz<BR>
+ # 3 - 1600 MHz<BR>
+ # @Prompt DRAM Speed
+ # @ValidList 0x80000001 | 0, 1, 2, 3
+ gVlvRefCodePkgTokenSpaceGuid.PcdDramSpeed|1
+
+ ## DRAM Type.
+ # 0 - DDR3<BR>
+ # 1 - DDR3L<BR>
+ # 2 - DDR3U<BR>
+ # 3 - DDR3All<BR>
+ # 4 - LPDDR2<BR>
+ # 5 - LPDDR3<BR>
+ # 6 - DDR4<BR>
+ # @Prompt DRAM Type
+ # @ValidList 0x80000001 | 0, 1, 2, 3, 4, 5, 6
+ gVlvRefCodePkgTokenSpaceGuid.PcdDramType|1
+
+ ## Please populate DIMM slot 0 if only one DIMM is supported.
+ # 0 - Disable<BR>
+ # 1 - Enable<BR>
+ # @Prompt DIMM 0 Enable
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdEnableDimm0|1
+
+ ## DIMM 1 has to be identical to DIMM 0.
+ # 0 - Disable<BR>
+ # 1 - Enable<BR>
+ # @Prompt DIMM 1 Enable Type
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdEnableDimm1|0
+
+ ## DRAM device data width.
+ # 0 - x8<BR>
+ # 1 - x16<BR>
+ # 2 - x32<BR>
+ # @Prompt DIMM_DWIDTH
+ # @ValidList 0x80000001 | 0, 1, 2
+ gVlvRefCodePkgTokenSpaceGuid.PcdDimmDataWidth|1
+
+ ## DRAM device data density.
+ # 0 - 1 Gbit<BR>
+ # 1 - 2 Gbit<BR>
+ # 2 - 4 Gbit<BR>
+ # 3 - 8 Gbit<BR>
+ # @Prompt DIMM_Density
+ # @ValidList 0x80000001 | 0, 1, 2, 3
+ gVlvRefCodePkgTokenSpaceGuid.PcdDimmDensity|2
+
+ ## DRAM device data bus width.
+ # 0 - 8 bits<BR>
+ # 1 - 16 bits<BR>
+ # 2 - 32 bits<BR>
+ # 3 - 64 bits<BR>
+ # @Prompt DIMM_BusWidth
+ # @ValidList 0x80000001 | 0, 1, 2, 3
+ gVlvRefCodePkgTokenSpaceGuid.PcdDimmBusWidth|3
+
+ ## Ranks Per DIMM or Sides Per DIMM.
+ # 0 - 1 Rank<BR>
+ # 1 - 2 Ranks<BR>
+ # @Prompt DIMM_Sides
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdRankPerDimm|0
+
+ ## tCL.<BR><BR>
+ # @Prompt tCL
+ gVlvRefCodePkgTokenSpaceGuid.PcdTcl|11
+
+ ## tRP and tRCD in DRAM clk - 5:12.5ns, 6:15ns, etc.
+ # @Prompt tRP_tRCD
+ gVlvRefCodePkgTokenSpaceGuid.PcdTrpTrcd|11
+
+ ## tWR in DRAM clk.
+ # @Prompt tWR
+ gVlvRefCodePkgTokenSpaceGuid.PcdTwr|12
+
+ ## tWTR in DRAM clk.
+ # @Prompt tWTR
+ gVlvRefCodePkgTokenSpaceGuid.PcdTwtr|6
+
+ ## tRRD in DRAM clk.
+ # @Prompt tRRD
+ gVlvRefCodePkgTokenSpaceGuid.PcdTrrd|6
+
+ ## tRTP in DRAM clk.
+ # @Prompt tRTP
+ gVlvRefCodePkgTokenSpaceGuid.PcdTrtp|6
+
+ ## tFAW in DRAM clk.
+ # @Prompt tFAW
+ gVlvRefCodePkgTokenSpaceGuid.PcdTfaw|32
+
+ #
+ # End of MRC parameters.
+ #
+
###############################################################################################
+
[PcdsDynamicHii.common.DEFAULT]
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|5
# Variable: L"Timeout"
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|L"HwErrRecSupport"|gEfiGlobalVariableGuid|0x0|1
# Variable: L"HwErrRecSupport"
Modified: branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgX64.dsc
===================================================================
--- branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgX64.dsc 2015-02-13
02:33:26 UTC (rev 16849)
+++ branches/UDK2014.SP1/Vlv2TbltDevicePkg/PlatformPkgX64.dsc 2015-02-13
04:35:39 UTC (rev 16850)
@@ -680,6 +680,126 @@
# Note this PCD could be set to TRUE for best boot performance and set to
FALSE for best device compatibility.
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdFastPS2Detection|TRUE
+
#######################################################################################################
+ #
+ # Begin of MRC parameters
+ #
+
+ ## Memory Parameter Patchable.
+ # FALSE - MRC Parameters are fixed for MinnowBoard Max<BR>
+ # TRUE - MRC Parameters are patchable by following PCDs<BR>
+ # @Prompt Memory Parameter Patchable.
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdMemoryParameterPatchable|FALSE
+
+ ## Memory Down or DIMM slot.
+ # 0 - DIMM<BR>
+ # 1 - Memory Down<BR>
+ # @Prompt Enable Memory Down
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdEnableMemoryDown|1
+
+ ## The speed of DRAM.
+ # 0 - 800 MHz<BR>
+ # 1 - 1066 MHz<BR>
+ # 2 - 1333 MHz<BR>
+ # 3 - 1600 MHz<BR>
+ # @Prompt DRAM Speed
+ # @ValidList 0x80000001 | 0, 1, 2, 3
+ gVlvRefCodePkgTokenSpaceGuid.PcdDramSpeed|1
+
+ ## DRAM Type.
+ # 0 - DDR3<BR>
+ # 1 - DDR3L<BR>
+ # 2 - DDR3U<BR>
+ # 3 - DDR3All<BR>
+ # 4 - LPDDR2<BR>
+ # 5 - LPDDR3<BR>
+ # 6 - DDR4<BR>
+ # @Prompt DRAM Type
+ # @ValidList 0x80000001 | 0, 1, 2, 3, 4, 5, 6
+ gVlvRefCodePkgTokenSpaceGuid.PcdDramType|1
+
+ ## Please populate DIMM slot 0 if only one DIMM is supported.
+ # 0 - Disable<BR>
+ # 1 - Enable<BR>
+ # @Prompt DIMM 0 Enable
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdEnableDimm0|1
+
+ ## DIMM 1 has to be identical to DIMM 0.
+ # 0 - Disable<BR>
+ # 1 - Enable<BR>
+ # @Prompt DIMM 1 Enable Type
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdEnableDimm1|0
+
+ ## DRAM device data width.
+ # 0 - x8<BR>
+ # 1 - x16<BR>
+ # 2 - x32<BR>
+ # @Prompt DIMM_DWIDTH
+ # @ValidList 0x80000001 | 0, 1, 2
+ gVlvRefCodePkgTokenSpaceGuid.PcdDimmDataWidth|1
+
+ ## DRAM device data density.
+ # 0 - 1 Gbit<BR>
+ # 1 - 2 Gbit<BR>
+ # 2 - 4 Gbit<BR>
+ # 3 - 8 Gbit<BR>
+ # @Prompt DIMM_Density
+ # @ValidList 0x80000001 | 0, 1, 2, 3
+ gVlvRefCodePkgTokenSpaceGuid.PcdDimmDensity|2
+
+ ## DRAM device data bus width.
+ # 0 - 8 bits<BR>
+ # 1 - 16 bits<BR>
+ # 2 - 32 bits<BR>
+ # 3 - 64 bits<BR>
+ # @Prompt DIMM_BusWidth
+ # @ValidList 0x80000001 | 0, 1, 2, 3
+ gVlvRefCodePkgTokenSpaceGuid.PcdDimmBusWidth|3
+
+ ## Ranks Per DIMM or Sides Per DIMM.
+ # 0 - 1 Rank<BR>
+ # 1 - 2 Ranks<BR>
+ # @Prompt DIMM_Sides
+ # @ValidList 0x80000001 | 0, 1
+ gVlvRefCodePkgTokenSpaceGuid.PcdRankPerDimm|0
+
+ ## tCL.<BR><BR>
+ # @Prompt tCL
+ gVlvRefCodePkgTokenSpaceGuid.PcdTcl|11
+
+ ## tRP and tRCD in DRAM clk - 5:12.5ns, 6:15ns, etc.
+ # @Prompt tRP_tRCD
+ gVlvRefCodePkgTokenSpaceGuid.PcdTrpTrcd|11
+
+ ## tWR in DRAM clk.
+ # @Prompt tWR
+ gVlvRefCodePkgTokenSpaceGuid.PcdTwr|12
+
+ ## tWTR in DRAM clk.
+ # @Prompt tWTR
+ gVlvRefCodePkgTokenSpaceGuid.PcdTwtr|6
+
+ ## tRRD in DRAM clk.
+ # @Prompt tRRD
+ gVlvRefCodePkgTokenSpaceGuid.PcdTrrd|6
+
+ ## tRTP in DRAM clk.
+ # @Prompt tRTP
+ gVlvRefCodePkgTokenSpaceGuid.PcdTrtp|6
+
+ ## tFAW in DRAM clk.
+ # @Prompt tFAW
+ gVlvRefCodePkgTokenSpaceGuid.PcdTfaw|32
+
+ #
+ # End of MRC parameters.
+ #
+
###############################################################################################
+
[PcdsDynamicHii.common.DEFAULT]
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|5
# Variable: L"Timeout"
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|L"HwErrRecSupport"|gEfiGlobalVariableGuid|0x0|1
# Variable: L"HwErrRecSupport"
------------------------------------------------------------------------------
Dive into the World of Parallel Programming. The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________
edk2-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-commits
