Revision: 18760
http://sourceforge.net/p/edk2/code/18760
Author: jyao1
Date: 2015-11-10 02:03:40 +0000 (Tue, 10 Nov 2015)
Log Message:
-----------
Add error handling for TPM in S3 resume failure.
If TPM2_Startup(TPM_SU_STATE) to return an error, the system
firmware that resumes from S3 MUST deal with a TPM2_Startup
error appropriately.
For example, issuing a TPM2_Startup(TPM_SU_CLEAR) command and
configuring the device securely by taking actions like extending
a separator with an error digest (0x01) into PCRs 0 through 7.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <[email protected]>
Reviewed-by: "Zhang, Chao B" <[email protected]>
Modified Paths:
--------------
trunk/edk2/SecurityPkg/Tcg/Tcg2Pei/Tcg2Pei.c
Modified: trunk/edk2/SecurityPkg/Tcg/Tcg2Pei/Tcg2Pei.c
===================================================================
--- trunk/edk2/SecurityPkg/Tcg/Tcg2Pei/Tcg2Pei.c 2015-11-09 13:28:33 UTC
(rev 18759)
+++ trunk/edk2/SecurityPkg/Tcg/Tcg2Pei/Tcg2Pei.c 2015-11-10 02:03:40 UTC
(rev 18760)
@@ -829,6 +829,33 @@
}
/**
+ Measure and log Separator event with error, and extend the measurement
result into a specific PCR.
+
+ @param[in] PCRIndex PCR index.
+
+ @retval EFI_SUCCESS Operation completed successfully.
+ @retval EFI_DEVICE_ERROR The operation was unsuccessful.
+
+**/
+EFI_STATUS
+MeasureSeparatorEventWithError (
+ IN TPM_PCRINDEX PCRIndex
+ )
+{
+ TCG_PCR_EVENT_HDR TcgEvent;
+ UINT32 EventData;
+
+ //
+ // Use EventData 0x1 to indicate there is error.
+ //
+ EventData = 0x1;
+ TcgEvent.PCRIndex = PCRIndex;
+ TcgEvent.EventType = EV_SEPARATOR;
+ TcgEvent.EventSize = (UINT32)sizeof (EventData);
+ return HashLogExtendEvent(0,(UINT8 *)&EventData, TcgEvent.EventSize,
&TcgEvent,(UINT8 *)&EventData);
+}
+
+/**
Entry point of this module.
@param[in] FileHandle Handle of the file being invoked.
@@ -847,6 +874,8 @@
EFI_STATUS Status;
EFI_STATUS Status2;
EFI_BOOT_MODE BootMode;
+ TPM_PCRINDEX PcrIndex;
+ BOOLEAN S3ErrorReport;
if (CompareGuid (PcdGetPtr(PcdTpmInstanceGuid),
&gEfiTpmDeviceInstanceNoneGuid) ||
CompareGuid (PcdGetPtr(PcdTpmInstanceGuid),
&gEfiTpmDeviceInstanceTpm12Guid)){
@@ -885,11 +914,15 @@
goto Done;
}
+ S3ErrorReport = FALSE;
if (PcdGet8 (PcdTpm2InitializationPolicy) == 1) {
if (BootMode == BOOT_ON_S3_RESUME) {
Status = Tpm2Startup (TPM_SU_STATE);
if (EFI_ERROR (Status) ) {
Status = Tpm2Startup (TPM_SU_CLEAR);
+ if (!EFI_ERROR(Status)) {
+ S3ErrorReport = TRUE;
+ }
}
} else {
Status = Tpm2Startup (TPM_SU_CLEAR);
@@ -903,6 +936,23 @@
// Update Tpm2HashMask according to PCR bank.
//
SetTpm2HashMask ();
+
+ if (S3ErrorReport) {
+ //
+ // The system firmware that resumes from S3 MUST deal with a
+ // TPM2_Startup error appropriately.
+ // For example, issue a TPM2_Startup(TPM_SU_CLEAR) command and
+ // configuring the device securely by taking actions like extending a
+ // separator with an error digest (0x01) into PCRs 0 through 7.
+ //
+ for (PcrIndex = 0; PcrIndex < 8; PcrIndex++) {
+ Status = MeasureSeparatorEventWithError (PcrIndex);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Separator Event with Error not Measured.
Error!\n"));
+ }
+ }
+ }
+
//
// TpmSelfTest is optional on S3 path, skip it to save S3 time
//
------------------------------------------------------------------------------
_______________________________________________
edk2-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-commits
