Revision: 18974
http://sourceforge.net/p/edk2/code/18974
Author: lzeng14
Date: 2015-11-26 08:52:58 +0000 (Thu, 26 Nov 2015)
Log Message:
-----------
EmbeddedPkg: Remove SerialDxe and SerialPortExtLib libraries
Cc: Michael D Kinney <[email protected]>
Cc: Liming Gao <[email protected]>
Cc: Leif Lindholm <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Modified Paths:
--------------
trunk/edk2/EmbeddedPkg/EmbeddedPkg.dsc
Removed Paths:
-------------
trunk/edk2/EmbeddedPkg/Include/Library/SerialPortExtLib.h
trunk/edk2/EmbeddedPkg/Library/SerialPortExtLibNull/
trunk/edk2/EmbeddedPkg/Library/TemplateSerialPortExtLib/
trunk/edk2/EmbeddedPkg/SerialDxe/
Modified: trunk/edk2/EmbeddedPkg/EmbeddedPkg.dsc
===================================================================
--- trunk/edk2/EmbeddedPkg/EmbeddedPkg.dsc 2015-11-26 08:52:12 UTC (rev
18973)
+++ trunk/edk2/EmbeddedPkg/EmbeddedPkg.dsc 2015-11-26 08:52:58 UTC (rev
18974)
@@ -2,7 +2,7 @@
# Embedded Package
#
#
-# Copyright (c) 2007, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
# Copyright (c) 2012-2015, ARM Ltd. All rights reserved.<BR>
#
# This program and the accompanying materials
@@ -68,7 +68,6 @@
PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
SerialPortLib|MdePkg/Library/BaseSerialPortLibNull/BaseSerialPortLibNull.inf
-
SerialPortExtLib|EmbeddedPkg/Library/TemplateSerialPortExtLib/TemplateSerialPortExtLib.inf
RealTimeClockLib|EmbeddedPkg/Library/TemplateRealTimeClockLib/TemplateRealTimeClockLib.inf
EfiResetSystemLib|EmbeddedPkg/Library/TemplateResetSystemLib/TemplateResetSystemLib.inf
GdbSerialLib|EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.inf
@@ -249,8 +248,6 @@
EmbeddedPkg/Library/GdbSerialLib/GdbSerialLib.inf
EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
- MdePkg/Library/BaseSerialPortLibNull/BaseSerialPortLibNull.inf
- EmbeddedPkg/Library/SerialPortExtLibNull/SerialPortExtLibNull.inf
EmbeddedPkg/Library/TemplateResetSystemLib/TemplateResetSystemLib.inf
EmbeddedPkg/Library/TemplateRealTimeClockLib/TemplateRealTimeClockLib.inf
EmbeddedPkg/Library/LzmaHobCustomDecompressLib/LzmaHobCustomDecompressLib.inf
@@ -261,7 +258,6 @@
EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
- EmbeddedPkg/SerialDxe/SerialDxe.inf
EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf {
<LibraryClasses>
Deleted: trunk/edk2/EmbeddedPkg/Include/Library/SerialPortExtLib.h
===================================================================
--- trunk/edk2/EmbeddedPkg/Include/Library/SerialPortExtLib.h 2015-11-26
08:52:12 UTC (rev 18973)
+++ trunk/edk2/EmbeddedPkg/Include/Library/SerialPortExtLib.h 2015-11-26
08:52:58 UTC (rev 18974)
@@ -1,116 +0,0 @@
-/** @file
-
- Serial I/O port control interface extension.
-
- This library provides an extension to the library providing common
- serial I/O port functions that is defined in MdePkg. The aim is to
- provide more control over the functionalities of a serial port. The
- extension covers all the needs of the UEFI Serial I/O Protocol.
- Though, its use is not restricted to the UEFI Serial I/O Protocol.
- It could for example be used in the PEI phase of the boot sequence
- as well.
-
- Copyright (c) 2012 - 2014, ARM Ltd. All rights reserved.
-
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD
License
- which accompanies this distribution. The full text of the license may be
found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef __SERIAL_PORT_EXT_LIB_H__
-#define __SERIAL_PORT_EXT_LIB_H__
-
-#include <Uefi/UefiBaseType.h>
-#include <Protocol/SerialIo.h>
-
-/**
-
- Assert or deassert the control signals on a serial port.
- The following control signals are set according their bit settings :
- . Request to Send
- . Data Terminal Ready
-
- @param[in] Control The following bits are taken into account :
- . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the
- "Request To Send" control signal if this bit is
- equal to one/zero.
- . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert
- the "Data Terminal Ready" control signal if this
- bit is equal to one/zero.
- . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable
- the hardware loopback if this bit is equal to
- one/zero.
- . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported.
- . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/
- disable the hardware flow control based on CTS (Clear
- To Send) and RTS (Ready To Send) control signals.
-
- @retval RETURN_SUCCESS The new control bits were set on the serial
device.
- @retval RETURN_UNSUPPORTED The serial device does not support this
operation.
-
-**/
-RETURN_STATUS
-EFIAPI
-SerialPortSetControl (
- IN UINT32 Control
- );
-
-/**
-
- Retrieve the status of the control bits on a serial device.
-
- @param[out] Control Status of the control bits on a serial device :
-
- . EFI_SERIAL_DATA_CLEAR_TO_SEND,
EFI_SERIAL_DATA_SET_READY,
- EFI_SERIAL_RING_INDICATE, EFI_SERIAL_CARRIER_DETECT,
- EFI_SERIAL_REQUEST_TO_SEND,
EFI_SERIAL_DATA_TERMINAL_READY
- are all related to the DTE (Data Terminal Equipment)
and
- DCE (Data Communication Equipment) modes of
operation of
- the serial device.
- . EFI_SERIAL_INPUT_BUFFER_EMPTY : equal to one if the
receive
- buffer is empty, 0 otherwise.
- . EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one if the
transmit
- buffer is empty, 0 otherwise.
- . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to one
if the
- hardware loopback is enabled (the ouput feeds the
receive
- buffer), 0 otherwise.
- . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to one
if a
- loopback is accomplished by software, 0 otherwise.
- . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : equal to
one if the
- hardware flow control based on CTS (Clear To Send)
and RTS
- (Ready To Send) control signals is enabled, 0
otherwise.
-
- @retval RETURN_SUCCESS The control bits were read from the serial
device.
- @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
-
-**/
-RETURN_STATUS
-EFIAPI
-SerialPortGetControl (
- OUT UINT32 *Control
- );
-
-/**
- Set the serial device attributes.
-
- @return Always return EFI_UNSUPPORTED.
-
-**/
-RETURN_STATUS
-EFIAPI
-SerialPortSetAttributes (
- IN OUT UINT64 *BaudRate,
- IN OUT UINT32 *ReceiveFifoDepth,
- IN OUT UINT32 *Timeout,
- IN OUT EFI_PARITY_TYPE *Parity,
- IN OUT UINT8 *DataBits,
- IN OUT EFI_STOP_BITS_TYPE *StopBits
- );
-
-#endif
-
------------------------------------------------------------------------------
Go from Idea to Many App Stores Faster with Intel(R) XDK
Give your users amazing mobile app experiences with Intel(R) XDK.
Use one codebase in this all-in-one HTML5 development environment.
Design, debug & build mobile apps & 2D/3D high-impact games for multiple OSs.
http://pubads.g.doubleclick.net/gampad/clk?id=254741551&iu=/4140
_______________________________________________
edk2-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-commits
