Revision: 19438
http://sourceforge.net/p/edk2/code/19438
Author: niruiyu
Date: 2015-12-22 07:13:27 +0000 (Tue, 22 Dec 2015)
Log Message:
-----------
MdeModulePkg: Add PCD description to MdeModulePkg.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <[email protected]>
Reviewed-by: Shumin Qiu <[email protected]>
Modified Paths:
--------------
trunk/edk2/MdeModulePkg/MdeModulePkg.dec
trunk/edk2/MdeModulePkg/MdeModulePkg.uni
Modified: trunk/edk2/MdeModulePkg/MdeModulePkg.dec
===================================================================
--- trunk/edk2/MdeModulePkg/MdeModulePkg.dec 2015-12-22 02:13:18 UTC (rev
19437)
+++ trunk/edk2/MdeModulePkg/MdeModulePkg.dec 2015-12-22 07:13:27 UTC (rev
19438)
@@ -983,19 +983,19 @@
# Each array entry is 24-byte in length. The array is terminated
# by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only
contains a
# standard 16550 PCI serial device whose class code is 7/0/2, the value is
0xFFFF.
- # The C style structure is defined as below:
- # typedef struct {
- # UINT16 VendorId; ///< Vendor ID to match the PCI device. The
value 0xFFFF terminates the list of entries.
- # UINT16 DeviceId; ///< Device ID to match the PCI device
- # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default
clock rate of 1843200 Hz
- # UINT64 Offset; ///< The byte offset into to the BAR
- # UINT8 BarIndex; ///< Which BAR to get the UART base address
- # UINT8 RegisterStride; ///< UART register stride in bytes. Set to
0 for default register stride of 1 byte.
- # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set
to 0 for a default FIFO depth of 16 bytes.
- # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set
to 0 for a default FIFO depth of 16 bytes.
- # UINT8 Reserved[2];
- # } PCI_SERIAL_PARAMETER;
- # It contains zero or more instances of the above structure.
+ # The C style structure is defined as below:<BR>
+ # typedef struct {<BR>
+ # UINT16 VendorId; ///< Vendor ID to match the PCI device. The
value 0xFFFF terminates the list of entries.<BR>
+ # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>
+ # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default
clock rate of 1843200 Hz.<BR>
+ # UINT64 Offset; ///< The byte offset into to the BAR.<BR>
+ # UINT8 BarIndex; ///< Which BAR to get the UART base
address.<BR>
+ # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0
for default register stride of 1 byte.<BR>
+ # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set
to 0 for a default FIFO depth of 16 bytes.<BR>
+ # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set
to 0 for a default FIFO depth of 16 bytes.<BR>
+ # UINT8 Reserved[2];<BR>
+ # } PCI_SERIAL_PARAMETER;<BR>
+ # It contains zero or more instances of the above structure.<BR>
# For example, if a PCI device contains two UARTs, PcdPciSerialParameters
needs
# to contain two instances of the above structure, with the VendorId and
DeviceId
# equals to the Device ID and Vendor ID of the device; If the PCI device
uses the
@@ -1003,7 +1003,7 @@
# BarIndex of second one equals to 1; If the PCI device uses the first BAR
to
# support both UARTs, BarIndex of both instance equals to 0, Offset of first
# instance equals to 0 and Offset of second one equals to a value bigger
than or
- # equal to 8.
+ # equal to 8.<BR>
# For certain UART whose register needs to be accessed in DWORD aligned
address,
# RegisterStride equals to 4.
# @Prompt Pci Serial Parameters
Modified: trunk/edk2/MdeModulePkg/MdeModulePkg.uni
===================================================================
--- trunk/edk2/MdeModulePkg/MdeModulePkg.uni 2015-12-22 02:13:18 UTC (rev
19437)
+++ trunk/edk2/MdeModulePkg/MdeModulePkg.uni 2015-12-22 07:13:27 UTC (rev
19438)
@@ -881,4 +881,37 @@
"FALSE - Not shadow PEIM after memory is ready.<BR>"
#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdShadowPeimOnBoot_PROMPT
#language en-US "Shadow Peim on boot"
-
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdSerialUseHalfHandshake_PROMPT
#language en-US "Enable Serial device Half Hand Shake"
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdSerialUseHalfHandshake_HELP
#language en-US "Indicates if Serial device uses half hand shake.<BR><BR>\n"
+
"TRUE - Serial device uses half hand shake.<BR>\n"
+
"FALSE - Serial device doesn't use half hand shake.<BR>"
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPciSerialParameters_PROMPT
#language en-US "Pci Serial Parameters"
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPciSerialParameters_HELP
#language en-US "PCI Serial Parameters. It is an array of VendorID, DeviceID,
ClockRate, Offset,\n"
+
"BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth
information that \n"
+
"describes the parameters of special PCI serial devices.\n"
+
"Each array entry is 24-byte in length. The array is terminated\n"
+
"by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only
contains a\n"
+
"standard 16550 PCI serial device whose class code is 7/0/2, the value
is 0xFFFF.\n"
+
"The C style structure is defined as below:<BR>\n"
+
"typedef struct {<BR>\n"
+
" UINT16 VendorId; ///< Vendor ID to match the PCI device.
The value 0xFFFF terminates the list of entries.<BR>\n"
+
" UINT16 DeviceId; ///< Device ID to match the PCI
device<BR>\n"
+
" UINT32 ClockRate; ///< UART clock rate. Set to 0 for
default clock rate of 1843200 Hz<BR>\n"
+
" UINT64 Offset; ///< The byte offset into to the
BAR<BR>\n"
+
" UINT8 BarIndex; ///< Which BAR to get the UART base
address<BR>\n"
+
" UINT8 RegisterStride; ///< UART register stride in bytes. Set
to 0 for default register stride of 1 byte.<BR>\n"
+
" UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes.
Set to 0 for a default FIFO depth of 16 bytes.<BR>\n"
+
" UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes.
Set to 0 for a default FIFO depth of 16 bytes.<BR>\n"
+
" UINT8 Reserved[2];<BR>\n"
+
"} PCI_SERIAL_PARAMETER;<BR>\n"
+
"It contains zero or more instances of the above structure.<BR>\n"
+
"For example, if a PCI device contains two UARTs,
PcdPciSerialParameters needs\n"
+
"to contain two instances of the above structure, with the VendorId
and DeviceId\n"
+
"equals to the Device ID and Vendor ID of the device; If the PCI
device uses the\n"
+
"first two BARs to support two UARTs, BarIndex of first instance
equals to 0 and\n"
+
"BarIndex of second one equals to 1; If the PCI device uses the first
BAR to\n"
+
"support both UARTs, BarIndex of both instance equals to 0, Offset of
first\n"
+
"instance equals to 0 and Offset of second one equals to a value
bigger than or\n"
+
"equal to 8.<BR>\n"
+
"For certain UART whose register needs to be accessed in DWORD aligned
address,\n"
+
"RegisterStride equals to 4.\n"
------------------------------------------------------------------------------
_______________________________________________
edk2-commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-commits
