You could look at the reconnect command in the shell. Sounds like you are doing the equivalent of: Reconnect -r Map -r (only do this if you need map names)
> -----Original Message----- > From: edk2-devel [mailto:[email protected]] On Behalf Of > Robinson, Keith > Sent: Thursday, August 27, 2015 9:03 AM > To: [email protected] > Subject: [edk2] USB hot swap support > > Hello, > > I am trying to determine if it is possible to write a UEFI application that > allows > the user to swap USB mass storage devices and re-enumerate the new > device inserted. > > Thanks, > Keith Robinson > > > This email and any files transmitted with it may be confidential, legally > privileged and protected in law and are intended solely for the use of the > individual to whom it is addressed. Any view or opinions presented are solely > those of the author and do not necessarily represent those of ViaSat. If you > have received this Email in error please contact the sender by return and > confirm that its contents have been destroyed without further distribution or > disclosure. Please email > [email protected]<mailto:[email protected]> with any questions > relating to this disclaimer. > > ViaSat has Registered Offices at Sandford Lane, Wareham, Dorset BH20 4DY. > The company is registered in England and Wales under no: 3007498. > _______________________________________________ > edk2-devel mailing list > [email protected] > https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
