EFI_SCSI_IO_PROTOCOL has alignment requirement on any data buffer used in SCSI data transfer. As a wrap of this protocol, UefiScsiLib have same request. Adding EFI_INVALID_PARAMETER return status in function comments to ask the caller to guarantee this alignment.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian <[email protected]> Cc: Star Zeng <[email protected]> --- MdePkg/Include/Library/UefiScsiLib.h | 379 ++++++++++++++++++------------ MdePkg/Library/UefiScsiLib/UefiScsiLib.c | 385 +++++++++++++++++++------------ 2 files changed, 469 insertions(+), 295 deletions(-) diff --git a/MdePkg/Include/Library/UefiScsiLib.h b/MdePkg/Include/Library/UefiScsiLib.h index 768a912..26e4aa4 100644 --- a/MdePkg/Include/Library/UefiScsiLib.h +++ b/MdePkg/Include/Library/UefiScsiLib.h @@ -5,7 +5,7 @@ for hard drive, CD and DVD devices that are the most common SCSI boot targets used by UEFI platforms. This library class depends on SCSI I/O Protocol defined in UEFI Specification and SCSI-2 industry standard. -Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR> +Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR> This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at @@ -32,6 +32,9 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. If HostAdapterStatus is NULL, then ASSERT(). If TargetStatus is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance for the specific SCSI target. @@ -61,27 +64,28 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Protocol in the UEFI Specification for details on the possible return values. - @retval EFI_SUCCESS The command was executed successfully. - See HostAdapterStatus, TargetStatus, SenseDataLength, - and SenseData in that order for additional status - information. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because - there are too many SCSI Command Packets already - queued. The SCSI Request Packet was not sent, so - no additional status information is available. - The caller may retry again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send - SCSI Request Packet. See HostAdapterStatus, - TargetStatus, SenseDataLength, and SenseData in that - order for additional status information. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet - is not supported by the SCSI initiator(i.e., SCSI - Host Controller). The SCSI Request Packet was not - sent, so no additional status information is available. - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request - Packet to execute. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for - additional status information. + @retval EFI_SUCCESS The command was executed successfully. + See HostAdapterStatus, TargetStatus, SenseDataLength, + and SenseData in that order for additional status + information. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already + queued. The SCSI Request Packet was not sent, so + no additional status information is available. + The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send + SCSI Request Packet. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that + order for additional status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI + Host Controller). The SCSI Request Packet was not + sent, so no additional status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request + Packet to execute. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -108,6 +112,14 @@ ScsiTestUnitReadyCommand ( If TargetStatus is NULL, then ASSERT(). If InquiryDataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If InquiryDataLength is non-zero and InquiryDataBuffer is not NULL, InquiryDataBuffer + must meet buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance for the specific SCSI target. @param[in] Timeout The timeout in 100 ns units to use for the @@ -150,28 +162,29 @@ ScsiTestUnitReadyCommand ( If FALSE, then the standard inquiry data is returned in InquiryDataBuffer. - @retval EFI_SUCCESS The command was executed successfully. See HostAdapterStatus, - TargetStatus, SenseDataLength, and SenseData in that order - for additional status information. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire - InquiryDataBuffer could not be transferred. The actual - number of bytes transferred is returned in InquiryDataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there - are too many SCSI Command Packets already queued. - The SCSI Request Packet was not sent, so no additional - status information is available. The caller may retry again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI - Request Packet. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for additional - status information. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not - supported by the SCSI initiator(i.e., SCSI Host Controller). - The SCSI Request Packet was not sent, so no additional - status information is available. - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request - Packet to execute. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for - additional status information. + @retval EFI_SUCCESS The command was executed successfully. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that order + for additional status information. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + InquiryDataBuffer could not be transferred. The actual + number of bytes transferred is returned in InquiryDataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there + are too many SCSI Command Packets already queued. + The SCSI Request Packet was not sent, so no additional + status information is available. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI + Request Packet. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for additional + status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not + supported by the SCSI initiator(i.e., SCSI Host Controller). + The SCSI Request Packet was not sent, so no additional + status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request + Packet to execute. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -201,6 +214,14 @@ ScsiInquiryCommand ( If TargetStatus is NULL, then ASSERT(). If InquiryDataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If InquiryDataLength is non-zero and InquiryDataBuffer is not NULL, InquiryDataBuffer + must meet buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance for the specific SCSI target. @param[in] Timeout The timeout in 100 ns units to use for the @@ -245,28 +266,29 @@ ScsiInquiryCommand ( @param[in] PageCode The page code of the vital product data. It's ignored if EnableVitalProductData is FALSE. - @retval EFI_SUCCESS The command executed successfully. See HostAdapterStatus, - TargetStatus, SenseDataLength, and SenseData in that order - for additional status information. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire - InquiryDataBuffer could not be transferred. The actual - number of bytes transferred is returned in InquiryDataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there - are too many SCSI Command Packets already queued. - The SCSI Request Packet was not sent, so no additional - status information is available. The caller may retry again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI - Request Packet. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for additional - status information. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not - supported by the SCSI initiator(i.e., SCSI Host Controller). - The SCSI Request Packet was not sent, so no additional - status information is available. - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request - Packet to execute. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for - additional status information. + @retval EFI_SUCCESS The command executed successfully. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that order + for additional status information. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + InquiryDataBuffer could not be transferred. The actual + number of bytes transferred is returned in InquiryDataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there + are too many SCSI Command Packets already queued. + The SCSI Request Packet was not sent, so no additional + status information is available. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI + Request Packet. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for additional + status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not + supported by the SCSI initiator(i.e., SCSI Host Controller). + The SCSI Request Packet was not sent, so no additional + status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request + Packet to execute. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -299,6 +321,13 @@ ScsiInquiryCommandEx ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance for the specific SCSI target. @@ -340,30 +369,31 @@ ScsiInquiryCommandEx ( @param[in] PageControl Specifies the PC field of the CDB for this SCSI Command. @param[in] PageCode Specifies the Page Control field of the CDB for this SCSI Command. - @retval EFI_SUCCESS The command was executed successfully. - See HostAdapterStatus, TargetStatus, SenseDataLength, - and SenseData in that order for additional status information. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the - entire DataBuffer could not be transferred. - The actual number of bytes transferred is returned - in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because - there are too many SCSI Command Packets already queued. - The SCSI Request Packet was not sent, so no additional - status information is available. The caller may retry - again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send - SCSI Request Packet. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for - additional status information. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet - is not supported by the SCSI initiator(i.e., SCSI - Host Controller). The SCSI Request Packet was not - sent, so no additional status information is available. - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI - Request Packet to execute. See HostAdapterStatus, - TargetStatus, SenseDataLength, and SenseData in that - order for additional status information. + @retval EFI_SUCCESS The command was executed successfully. + See HostAdapterStatus, TargetStatus, SenseDataLength, + and SenseData in that order for additional status information. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the + entire DataBuffer could not be transferred. + The actual number of bytes transferred is returned + in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already queued. + The SCSI Request Packet was not sent, so no additional + status information is available. The caller may retry + again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send + SCSI Request Packet. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI + Host Controller). The SCSI Request Packet was not + sent, so no additional status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI + Request Packet to execute. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that + order for additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -395,6 +425,10 @@ ScsiModeSense10Command ( If HostAdapterStatus is NULL, then ASSERT(). If TargetStatus is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -409,6 +443,7 @@ ScsiModeSense10Command ( @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by the SCSI initiator(i.e., SCSI Host Controller) @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -436,6 +471,14 @@ ScsiRequestSenseCommand ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -446,16 +489,17 @@ ScsiRequestSenseCommand ( @param[in, out] DataLength The length of data buffer. @param[in] Pmi Partial medium indicator. - @retval EFI_SUCCESS Command is executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire - DataBuffer could not be transferred. The actual - number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because - there are too many SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet - is not supported by the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + DataBuffer could not be transferred. The actual + number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -486,6 +530,14 @@ ScsiReadCapacityCommand ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -496,16 +548,17 @@ ScsiReadCapacityCommand ( @param[in, out] DataLength The length of data buffer. @param[in] Pmi Partial medium indicator. - @retval EFI_SUCCESS Command is executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire - DataBuffer could not be transferred. The actual - number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because - there are too many SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet - is not supported by the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + DataBuffer could not be transferred. The actual + number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -537,6 +590,13 @@ ScsiReadCapacity16Command ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @@ -549,15 +609,16 @@ ScsiReadCapacity16Command ( @param[in] StartLba The start address of LBA. @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. - @retval EFI_SUCCESS Command is executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could - not be transferred. The actual number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many - SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by - the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -590,6 +651,14 @@ ScsiRead10Command ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo SCSI IO Protocol to use @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -601,15 +670,16 @@ ScsiRead10Command ( @param[in] StartLba The start address of LBA. @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. - @retval EFI_SUCCESS Command is executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could - not be transferred. The actual number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many - SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by - the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -641,6 +711,13 @@ ScsiWrite10Command ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @@ -653,15 +730,16 @@ ScsiWrite10Command ( @param[in] StartLba The start address of LBA. @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. - @retval EFI_SUCCESS Command is executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could - not be transferred. The actual number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many - SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by - the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -694,6 +772,14 @@ ScsiRead16Command ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo SCSI IO Protocol to use @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -705,15 +791,16 @@ ScsiRead16Command ( @param[in] StartLba The start address of LBA. @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. - @retval EFI_SUCCESS Command is executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could - not be transferred. The actual number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many - SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by - the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS diff --git a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c index 8a073db..89f2617 100644 --- a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c +++ b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c @@ -1,7 +1,7 @@ /** @file UEFI SCSI Library implementation - Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR> + Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR> This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at @@ -42,6 +42,9 @@ If HostAdapterStatus is NULL, then ASSERT(). If TargetStatus is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance for the specific SCSI target. @@ -71,27 +74,28 @@ Protocol in the UEFI Specification for details on the possible return values. - @retval EFI_SUCCESS The command was executed successfully. - See HostAdapterStatus, TargetStatus, SenseDataLength, - and SenseData in that order for additional status - information. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because - there are too many SCSI Command Packets already - queued. The SCSI Request Packet was not sent, so - no additional status information is available. - The caller may retry again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send - SCSI Request Packet. See HostAdapterStatus, - TargetStatus, SenseDataLength, and SenseData in that - order for additional status information. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet - is not supported by the SCSI initiator(i.e., SCSI - Host Controller). The SCSI Request Packet was not - sent, so no additional status information is available. - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request - Packet to execute. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for - additional status information. + @retval EFI_SUCCESS The command was executed successfully. + See HostAdapterStatus, TargetStatus, SenseDataLength, + and SenseData in that order for additional status + information. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already + queued. The SCSI Request Packet was not sent, so + no additional status information is available. + The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send + SCSI Request Packet. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that + order for additional status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI + Host Controller). The SCSI Request Packet was not + sent, so no additional status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request + Packet to execute. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -153,6 +157,14 @@ ScsiTestUnitReadyCommand ( If TargetStatus is NULL, then ASSERT(). If InquiryDataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If InquiryDataLength is non-zero and InquiryDataBuffer is not NULL, InquiryDataBuffer + must meet buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance for the specific SCSI target. @param[in] Timeout The timeout in 100 ns units to use for the @@ -197,28 +209,29 @@ ScsiTestUnitReadyCommand ( @param[in] PageCode The page code of the vital product data. It's ignored if EnableVitalProductData is FALSE. - @retval EFI_SUCCESS The command executed successfully. See HostAdapterStatus, - TargetStatus, SenseDataLength, and SenseData in that order - for additional status information. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire - InquiryDataBuffer could not be transferred. The actual - number of bytes transferred is returned in InquiryDataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there - are too many SCSI Command Packets already queued. - The SCSI Request Packet was not sent, so no additional - status information is available. The caller may retry again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI - Request Packet. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for additional - status information. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not - supported by the SCSI initiator(i.e., SCSI Host Controller). - The SCSI Request Packet was not sent, so no additional - status information is available. - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request - Packet to execute. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for - additional status information. + @retval EFI_SUCCESS The command executed successfully. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that order + for additional status information. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + InquiryDataBuffer could not be transferred. The actual + number of bytes transferred is returned in InquiryDataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there + are too many SCSI Command Packets already queued. + The SCSI Request Packet was not sent, so no additional + status information is available. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI + Request Packet. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for additional + status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not + supported by the SCSI initiator(i.e., SCSI Host Controller). + The SCSI Request Packet was not sent, so no additional + status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request + Packet to execute. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -293,6 +306,14 @@ ScsiInquiryCommandEx ( If TargetStatus is NULL, then ASSERT(). If InquiryDataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If InquiryDataLength is non-zero and InquiryDataBuffer is not NULL, InquiryDataBuffer + must meet buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance for the specific SCSI target. @param[in] Timeout The timeout in 100 ns units to use for the @@ -335,28 +356,29 @@ ScsiInquiryCommandEx ( If FALSE, then the standard inquiry data is returned in InquiryDataBuffer. - @retval EFI_SUCCESS The command executed successfully. See HostAdapterStatus, - TargetStatus, SenseDataLength, and SenseData in that order - for additional status information. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire - InquiryDataBuffer could not be transferred. The actual - number of bytes transferred is returned in InquiryDataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there - are too many SCSI Command Packets already queued. - The SCSI Request Packet was not sent, so no additional - status information is available. The caller may retry again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI - Request Packet. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for additional - status information. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not - supported by the SCSI initiator(i.e., SCSI Host Controller). - The SCSI Request Packet was not sent, so no additional - status information is available. - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request - Packet to execute. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for - additional status information. + @retval EFI_SUCCESS The command was executed successfully. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that order + for additional status information. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + InquiryDataBuffer could not be transferred. The actual + number of bytes transferred is returned in InquiryDataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there + are too many SCSI Command Packets already queued. + The SCSI Request Packet was not sent, so no additional + status information is available. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI + Request Packet. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for additional + status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not + supported by the SCSI initiator(i.e., SCSI Host Controller). + The SCSI Request Packet was not sent, so no additional + status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request + Packet to execute. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -401,6 +423,13 @@ ScsiInquiryCommand ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance for the specific SCSI target. @@ -442,30 +471,31 @@ ScsiInquiryCommand ( @param[in] PageControl Specifies the PC field of the CDB for this SCSI Command. @param[in] PageCode Specifies the Page Control field of the CDB for this SCSI Command. - @retval EFI_SUCCESS The command executed successfully. - See HostAdapterStatus, TargetStatus, SenseDataLength, - and SenseData in that order for additional status information. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the - entire DataBuffer could not be transferred. - The actual number of bytes transferred is returned - in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because - there are too many SCSI Command Packets already queued. - The SCSI Request Packet was not sent, so no additional - status information is available. The caller may retry - again later. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send - SCSI Request Packet. See HostAdapterStatus, TargetStatus, - SenseDataLength, and SenseData in that order for - additional status information. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet - is not supported by the SCSI initiator(i.e., SCSI - Host Controller). The SCSI Request Packet was not - sent, so no additional status information is available. - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI - Request Packet to execute. See HostAdapterStatus, - TargetStatus, SenseDataLength, and SenseData in that - order for additional status information. + @retval EFI_SUCCESS The command was executed successfully. + See HostAdapterStatus, TargetStatus, SenseDataLength, + and SenseData in that order for additional status information. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the + entire DataBuffer could not be transferred. + The actual number of bytes transferred is returned + in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already queued. + The SCSI Request Packet was not sent, so no additional + status information is available. The caller may retry + again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send + SCSI Request Packet. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI + Host Controller). The SCSI Request Packet was not + sent, so no additional status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI + Request Packet to execute. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that + order for additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -543,6 +573,10 @@ ScsiModeSense10Command ( If HostAdapterStatus is NULL, then ASSERT(). If TargetStatus is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -550,13 +584,14 @@ ScsiModeSense10Command ( @param[out] HostAdapterStatus The status of Host Adapter. @param[out] TargetStatus The status of the target. - @retval EFI_SUCCESS The command executed successfully. + @retval EFI_SUCCESS Command is executed successfully. @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many SCSI Command Packets already queued. @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by the SCSI initiator(i.e., SCSI Host Controller) @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -620,6 +655,14 @@ ScsiRequestSenseCommand ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -628,18 +671,19 @@ ScsiRequestSenseCommand ( @param[out] TargetStatus The status of the target. @param[in, out] DataBuffer A pointer to a data buffer. @param[in, out] DataLength The length of data buffer. - @param[in] Pmi A partial medium indicator. - - @retval EFI_SUCCESS The command executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire - DataBuffer could not be transferred. The actual - number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because - there are too many SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet - is not supported by the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @param[in] Pmi Partial medium indicator. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + DataBuffer could not be transferred. The actual + number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -715,6 +759,14 @@ ScsiReadCapacityCommand ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -725,16 +777,17 @@ ScsiReadCapacityCommand ( @param[in, out] DataLength The length of data buffer. @param[in] Pmi Partial medium indicator. - @retval EFI_SUCCESS The command executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire - DataBuffer could not be transferred. The actual - number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because - there are too many SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet - is not supported by the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + DataBuffer could not be transferred. The actual + number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -813,6 +866,13 @@ ScsiReadCapacity16Command ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @@ -825,15 +885,16 @@ ScsiReadCapacity16Command ( @param[in] StartLba The start address of LBA. @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. - @retval EFI_SUCCESS The command is executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could - not be transferred. The actual number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many - SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by - the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -905,6 +966,14 @@ ScsiRead10Command ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo SCSI IO Protocol to use @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -916,15 +985,16 @@ ScsiRead10Command ( @param[in] StartLba The start address of LBA. @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. - @retval EFI_SUCCESS The command executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could - not be transferred. The actual number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many - SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by - the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -995,6 +1065,13 @@ ScsiWrite10Command ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. @param[in] ScsiIo A pointer to SCSI IO protocol. @param[in] Timeout The length of timeout period. @@ -1007,15 +1084,16 @@ ScsiWrite10Command ( @param[in] StartLba The start address of LBA. @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. - @retval EFI_SUCCESS The command executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could - not be transferred. The actual number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many - SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by - the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS @@ -1087,6 +1165,14 @@ ScsiRead16Command ( If TargetStatus is NULL, then ASSERT(). If DataLength is NULL, then ASSERT(). + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + @param[in] ScsiIo SCSI IO Protocol to use @param[in] Timeout The length of timeout period. @param[in, out] SenseData A pointer to output sense data. @@ -1098,15 +1184,16 @@ ScsiRead16Command ( @param[in] StartLba The start address of LBA. @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. - @retval EFI_SUCCESS The command is executed successfully. - @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could - not be transferred. The actual number of bytes transferred is returned in DataLength. - @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many - SCSI Command Packets already queued. - @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. - @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by - the SCSI initiator(i.e., SCSI Host Controller) - @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. **/ EFI_STATUS -- 1.9.5.msysgit.0 _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
