Cc: Michael D Kinney <michael.d.kin...@intel.com> Cc: Liming Gao <liming....@intel.com> Cc: Leif Lindholm <leif.lindh...@linaro.org> Cc: Ard Biesheuvel <ard.biesheu...@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.z...@intel.com> --- Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c | 84 +++++++++++++++++++++++ 1 file changed, 84 insertions(+)
diff --git a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c index 58f70d5..b0a8f5e 100644 --- a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c +++ b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c @@ -3,6 +3,7 @@ Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> + Copyright (c) 2015, Intel Corporation. All rights reserved.<BR> This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License @@ -122,3 +123,86 @@ SerialPortPoll ( } } +/** + Sets the control bits on a serial device. + + @param[in] Control Sets the bits of Control that are settable. + + @retval RETURN_SUCCESS The new control bits were set on the serial device. + @retval RETURN_UNSUPPORTED The serial device does not support this operation. + @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly. + +**/ +RETURN_STATUS +EFIAPI +SerialPortSetControl ( + IN UINT32 Control + ) +{ + return RETURN_UNSUPPORTED; +} + +/** + Retrieve the status of the control bits on a serial device. + + @param[out] Control A pointer to return the current control signals from the serial device. + + @retval RETURN_SUCCESS The control bits were read from the serial device. + @retval RETURN_UNSUPPORTED The serial device does not support this operation. + @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly. + +**/ +RETURN_STATUS +EFIAPI +SerialPortGetControl ( + OUT UINT32 *Control + ) +{ + *Control = 0; + if (!SerialPortPoll ()) { + *Control = EFI_SERIAL_INPUT_BUFFER_EMPTY; + } + return RETURN_SUCCESS; +} + +/** + Sets the baud rate, receive FIFO depth, transmit/receice time out, parity, + data buts, and stop bits on a serial device. + + @param BaudRate The requested baud rate. A BaudRate value of 0 will use the + device's default interface speed. + @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the + serial interface. A ReceiveFifoDepth value of 0 will use + the device's default FIFO depth. + @param Timeout The requested time out for a single character in microseconds. + This timeout applies to both the transmit and receive side of the + interface. A Timeout value of 0 will use the device's default time + out value. + @param Parity The type of parity to use on this serial device. A Parity value of + DefaultParity will use the device's default parity value. + @param DataBits The number of data bits to use on the serial device. A DataBits + vaule of 0 will use the device's default data bit setting. + @param StopBits The number of stop bits to use on this serial device. A StopBits + value of DefaultStopBits will use the device's default number of + stop bits. + + @retval RETURN_SUCCESS The new attributes were set on the serial device. + @retval RETURN_UNSUPPORTED The serial device does not support this operation. + @retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value. + @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly. + +**/ +RETURN_STATUS +EFIAPI +SerialPortSetAttributes ( + IN OUT UINT64 *BaudRate, + IN OUT UINT32 *ReceiveFifoDepth, + IN OUT UINT32 *Timeout, + IN OUT EFI_PARITY_TYPE *Parity, + IN OUT UINT8 *DataBits, + IN OUT EFI_STOP_BITS_TYPE *StopBits + ) +{ + return RETURN_UNSUPPORTED; +} + -- 1.9.5.msysgit.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel