Reviewed-by: Liming Gao <[email protected]> -----Original Message----- From: Bu, Daocheng Sent: Friday, December 11, 2015 4:57 PM To: [email protected] Cc: Gao, Liming Subject: [Patch] MdePkg: backout Ipmi2.0 definitions header file.
The file name is too long and with "Definitions" word that is duplicated meanings for the header file. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Daocheng Bu <[email protected]> CC: Liming Gao <[email protected]> --- MdePkg/Include/IndustryStandard/Ipmi.h | 29 - .../IndustryStandard/IpmiNetFnAppDefinitions.h | 647 --------------------- .../IndustryStandard/IpmiNetFnBridgeDefinitions.h | 243 -------- .../IndustryStandard/IpmiNetFnChassisDefinitions.h | 304 ---------- .../IpmiNetFnFirmwareDefinitions.h | 26 - .../IpmiNetFnGroupExtensionDefinitions.h | 26 - .../IpmiNetFnSensorEventDefinitions.h | 52 -- .../IndustryStandard/IpmiNetFnStorageDefinitions.h | 534 ----------------- .../IpmiNetFnTransportDefinitions.h | 556 ------------------ 9 files changed, 2417 deletions(-) delete mode 100644 MdePkg/Include/IndustryStandard/Ipmi.h delete mode 100644 MdePkg/Include/IndustryStandard/IpmiNetFnAppDefinitions.h delete mode 100644 MdePkg/Include/IndustryStandard/IpmiNetFnBridgeDefinitions.h delete mode 100644 MdePkg/Include/IndustryStandard/IpmiNetFnChassisDefinitions.h delete mode 100644 MdePkg/Include/IndustryStandard/IpmiNetFnFirmwareDefinitions.h delete mode 100644 MdePkg/Include/IndustryStandard/IpmiNetFnGroupExtensionDefinitions.h delete mode 100644 MdePkg/Include/IndustryStandard/IpmiNetFnSensorEventDefinitions.h delete mode 100644 MdePkg/Include/IndustryStandard/IpmiNetFnStorageDefinitions.h delete mode 100644 MdePkg/Include/IndustryStandard/IpmiNetFnTransportDefinitions.h diff --git a/MdePkg/Include/IndustryStandard/Ipmi.h b/MdePkg/Include/IndustryStandard/Ipmi.h deleted file mode 100644 index fbf55c8..0000000 --- a/MdePkg/Include/IndustryStandard/Ipmi.h +++ /dev/null @@ -1,29 +0,0 @@ -/** @file - IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. - - See IPMI specification, Appendix G, Command Assignments - and Appendix H, Sub-function Assignments. - - Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IPMIDEFINITIONS_H_ -#define _IPMIDEFINITIONS_H_ - -#include <IndustryStandard/IpmiNetFnChassisDefinitions.h> -#include <IndustryStandard/IpmiNetFnBridgeDefinitions.h> -#include <IndustryStandard/IpmiNetFnSensorEventDefinitions.h> -#include <IndustryStandard/IpmiNetFnAppDefinitions.h> -#include <IndustryStandard/IpmiNetFnFirmwareDefinitions.h> -#include <IndustryStandard/IpmiNetFnStorageDefinitions.h> -#include <IndustryStandard/IpmiNetFnTransportDefinitions.h> -#include <IndustryStandard/IpmiNetFnGroupExtensionDefinitions.h> - -#endif diff --git a/MdePkg/Include/IndustryStandard/IpmiNetFnAppDefinitions.h b/MdePkg/Include/IndustryStandard/IpmiNetFnAppDefinitions.h deleted file mode 100644 index d722c9e..0000000 --- a/MdePkg/Include/IndustryStandard/IpmiNetFnAppDefinitions.h +++ /dev/null @@ -1,647 +0,0 @@ -/** @file - IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. - - This file contains all NetFn App commands, including: - IPM Device "Global" Commands (Chapter 20) - Firmware Firewall & Command Discovery Commands (Chapter 21) - BMC Watchdog Timer Commands (Chapter 27) - IPMI Messaging Support Commands (Chapter 22) - RMCP+ Support and Payload Commands (Chapter 24) - - See IPMI specification, Appendix G, Command Assignments - and Appendix H, Sub-function Assignments. - - Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IPMINETFNAPPDEFINITIONS_H_ -#define _IPMINETFNAPPDEFINITIONS_H_ - -#pragma pack(1) -// -// Net function definition for App command -// -#define IPMI_NETFN_APP 0x06 - -// -// Below is Definitions for IPM Device "Global" Commands (Chapter 20) -// - -// -// Definitions for Get Device ID command -// -#define IPMI_APP_GET_DEVICE_ID 0x1 - -// -// Constants and Structure definitions for "Get Device ID" command to follow here -// -typedef struct { - UINT8 DeviceId; - UINT8 DeviceRevision : 4; - UINT8 Reserved : 3; - UINT8 DeviceSdr : 1; - UINT8 MajorFirmwareRev : 7; - UINT8 UpdateMode : 1; - UINT8 MinorFirmwareRev; - UINT8 SpecificationVersion; - UINT8 SensorDeviceSupport : 1; - UINT8 SdrRepositorySupport : 1; - UINT8 SelDeviceSupport : 1; - UINT8 FruInventorySupport : 1; - UINT8 IpmbMessageReceiver : 1; - UINT8 IpmbMessageGenerator : 1; - UINT8 BridgeSupport : 1; - UINT8 ChassisSupport : 1; - UINT8 ManufacturerId[3]; - UINT16 ProductId; - UINT32 AuxFirmwareRevInfo; -} IPMI_MSG_GET_DEVICE_ID_RSP; - - -// -// Definitions for Cold Reset command -// -#define IPMI_APP_COLD_RESET 0x2 - -// -// Constants and Structure definitions for "Cold Reset" command to follow here -// - -// -// Definitions for Warm Reset command -// -#define IPMI_APP_WARM_RESET 0x3 - -// -// Constants and Structure definitions for "Warm Reset" command to follow here -// - -// -// Definitions for Get Self Results command -// -#define IPMI_APP_GET_SELFTEST_RESULTS 0x4 - -// -// Constants and Structure definitions for "Get Self Results" command to follow here -// -typedef struct { - UINT8 Result; - UINT8 Param; -} IPMI_MSG_SELFTEST_RESULT_RSP; - -#define IPMI_APP_SELFTEST_NO_ERROR 0x55 -#define IPMI_APP_SELFTEST_NOT_IMPLEMENTED 0x56 -#define IPMI_APP_SELFTEST_ERROR 0x57 -#define IPMI_APP_SELFTEST_FATAL_HW_ERROR 0x58 -#define IPMI_APP_SELFTEST_INACCESSIBLE_SEL 0x80 -#define IPMI_APP_SELFTEST_INACCESSIBLE_SDR 0x40 -#define IPMI_APP_SELFTEST_INACCESSIBLE_FRU 0x20 -#define IPMI_APP_SELFTEST_IPMB_SIGNAL_FAIL 0x10 -#define IPMI_APP_SELFTEST_SDR_REPOSITORY_EMPTY 0x08 -#define IPMI_APP_SELFTEST_FRU_CORRUPT 0x04 -#define IPMI_APP_SELFTEST_FW_BOOTBLOCK_CORRUPT 0x02 -#define IPMI_APP_SELFTEST_FW_CORRUPT 0x01 - -// -// Definitions for Manufacturing Test ON command -// -#define IPMI_APP_MANUFACTURING_TEST_ON 0x5 - -// -// Constants and Structure definitions for "Manufacturing Test ON" command to follow here -// - -// -// Definitions for Set ACPI Power State command -// -#define IPMI_APP_SET_ACPI_POWERSTATE 0x6 - -// -// Constants and Structure definitions for "Set ACPI Power State" command to follow here -// -typedef struct { - UINT8 SystemPowerState : 7; - UINT8 SystemStateChange : 1; - UINT8 DevicePowerState : 7; - UINT8 DeviceStateChange : 1; -} IPMI_ACPI_POWER_STATE; - -// -// Definitions for Get ACPI Power State command -// -#define IPMI_APP_GET_ACPI_POWERSTATE 0x7 - -// -// Constants and Structure definitions for "Get ACPI Power State" command to follow here -// - -// -// Definitions for Get Device GUID command -// -#define IPMI_APP_GET_DEVICE_GUID 0x8 - -// -// Constants and Structure definitions for "Get Device GUID" command to follow here -// -// -// Message structure definition for "Get Device Guid" IPMI command -// -typedef struct { - UINT8 Guid[16]; -} IPMI_MSG_GET_DEVICE_GUID_RSP; - -// -// Below is Definitions for BMC Watchdog Timer Commands (Chapter 27) -// - -// -// Definitions for Reset WatchDog Timer command -// -#define IPMI_APP_RESET_WATCHDOG_TIMER 0x22 - -// -// Constants and Structure definitions for "Reset WatchDog Timer" command to follow here -// -typedef struct { - UINT8 TimerUse : 3; - UINT8 Reserved : 3; - UINT8 TimerRunning : 1; - UINT8 TimerUseExpirationFlagLog : 1; -} IPMI_WATCHDOG_TIMER_USE; - -// -// Definitions for Set WatchDog Timer command -// -#define IPMI_APP_SET_WATCHDOG_TIMER 0x24 - -// -// Constants and Structure definitions for "Set WatchDog Timer" command to follow here -// -typedef struct { - IPMI_WATCHDOG_TIMER_USE TimerUse; - UINT8 TimerActions; - UINT8 PretimeoutInterval; - UINT8 TimerUseExpirationFlagsClear; - UINT16 InitialCountdownValue; -} IPMI_SET_WATCHDOG_TIMER; - -// -// Definitions for Get WatchDog Timer command -// -#define IPMI_APP_GET_WATCHDOG_TIMER 0x25 - -// -// Constants and Structure definitions for "Get WatchDog Timer" command to follow here -// -typedef struct { - IPMI_WATCHDOG_TIMER_USE TimerUse; - UINT8 TimerActions; - UINT8 PretimeoutInterval; - UINT8 TimerUseExpirationFlagsClear; - UINT16 InitialCountdownValue; - UINT16 PresentCountdownValue; -} IPMI_WATCHDOG_TIMER; - -// -// The following srucure is temporary, need to be removed later -// -typedef struct { - UINT8 TimerUse : 3; - UINT8 Reserved1 : 3; - UINT8 StartTimer : 1; - UINT8 DontLog : 1; - union { - struct { - UINT8 TimeoutAction : 3; - UINT8 Reserved2 : 1; - UINT8 PreTimeoutIntr : 3; - UINT8 Reserved3 : 1; - } Byte2Bmp; - UINT8 Data8; - } Byte2; - - UINT8 PreTimeoutInterval; - UINT8 ExpirationReserved1 : 1; - UINT8 BiosFrb2TimerExpirationFlag : 1; - UINT8 BiosPostTimerExpirationFlag : 1; - UINT8 OsLoadTimerExpirationFlag : 1; - UINT8 ExpirationReserved2 : 4; - UINT16 Timeout; - UINT16 CurrCountdown; - UINT16 Reserved4; -} IPMI_FRB_TIMER; - -// -// Below is Definitions for IPMI Messaging Support Commands (Chapter 22) -// - -// -// Definitions for Set BMC Global Enables command -// -#define IPMI_APP_SET_BMC_GLOBAL_ENABLES 0x2E - -// -// Constants and Structure definitions for "Set BMC Global Enables " command to follow here -// - -// -// Definitions for Get BMC Global Enables command -// -#define IPMI_APP_GET_BMC_GLOBAL_ENABLES 0x2F - -// -// Constants and Structure definitions for "Get BMC Global Enables " command to follow here -// - -// -// Definitions for Clear Message Flags command -// -#define IPMI_APP_CLEAR_MESSAGE_FLAGS 0x30 - -// -// Constants and Structure definitions for "Clear Message Flags" command to follow here -// - -// -// Definitions for Get Message Flags command -// -#define IPMI_APP_GET_MESSAGE_FLAGS 0x31 - -// -// Constants and Structure definitions for "Get Message Flags" command to follow here -// - -// -// Definitions for Enable Message Channel Receive command -// -#define IPMI_APP_ENABLE_MESSAGE_CHANNEL_RECEIVE 0x32 - -// -// Constants and Structure definitions for "Enable Message Channel Receive" command to follow here -// - -// -// Definitions for Get Message command -// -#define IPMI_APP_GET_MESSAGE 0x33 - -// -// Constants and Structure definitions for "Get Message" command to follow here -// - -// -// Definitions for Send Message command -// -#define IPMI_APP_SEND_MESSAGE 0x34 - -// -// Constants and Structure definitions for "Send Message" command to follow here -// - -// -// Definitions for Read Event Message Buffer command -// -#define IPMI_APP_READ_EVENT_MSG_BUFFER 0x35 - -// -// Constants and Structure definitions for "Read Event Message Buffer" command to follow here -// - -// -// Definitions for Get BT Interface Capabilities command -// -#define IPMI_APP_GET_BT_INTERFACE_CAPABILITY 0x36 - -// -// Constants and Structure definitions for "Get BT Interface Capabilities" command to follow here -// - -// -// Definitions for Get System GUID command -// -#define IPMI_APP_GET_SYSTEM_GUID 0x37 - -// -// Constants and Structure definitions for "Get System GUID" command to follow here -// - -// -// Definitions for Get Channel Authentication Capabilities command -// -#define IPMI_APP_GET_CHANNEL_AUTHENTICATION_CAPABILITIES 0x38 - -// -// Constants and Structure definitions for "Get Channel Authentication Capabilities" command to follow here -// - -// -// Definitions for Get Session Challenge command -// -#define IPMI_APP_GET_SESSION_CHALLENGE 0x39 - -// -// Constants and Structure definitions for "Get Session Challenge" command to follow here -// - -// -// Definitions for Activate Session command -// -#define IPMI_APP_ACTIVATE_SESSION 0x3A - -// -// Constants and Structure definitions for "Activate Session" command to follow here -// - -// -// Definitions for Set Session Privelege Level command -// -#define IPMI_APP_SET_SESSION_PRIVELEGE_LEVEL 0x3B - -// -// Constants and Structure definitions for "Set Session Privelege Level" command to follow here -// - -// -// Definitions for Close Session command -// -#define IPMI_APP_CLOSE_SESSION 0x3C - -// -// Constants and Structure definitions for "Close Session" command to follow here -// - -// -// Definitions for Get Session Info command -// -#define IPMI_APP_GET_SESSION_INFO 0x3D - -// -// Constants and Structure definitions for "Get Session Info" command to follow here -// - -// -// Definitions for Get Auth Code command -// -#define IPMI_APP_GET_AUTHCODE 0x3F - -// -// Constants and Structure definitions for "Get AuthCode" command to follow here -// - -// -// Definitions for Set Channel Access command -// -#define IPMI_APP_SET_CHANNEL_ACCESS 0x40 - -// -// Constants and Structure definitions for "Set Channel Access" command to follow here -// - -// -// Definitions for Get Channel Access command -// -#define IPMI_APP_GET_CHANNEL_ACCESS 0x41 - -// -// Constants and Structure definitions for "Get Channel Access" command to follow here -// -typedef struct { - UINT8 ChannelNo : 4; - UINT8 Reserve1 : 4; - UINT8 Reserve2 : 6; - UINT8 MemoryType : 2; -} IPMI_GET_CHANNEL_ACCESS_COMMAND; - -typedef struct { - UINT8 AccessMode : 3; - UINT8 UserLevelAuthEnabled : 1; - UINT8 MessageAuthEnable : 1; - UINT8 Alert : 1; - UINT8 Reserve1 : 2; - UINT8 ChannelPriviledgeLimit : 4; - UINT8 Reserve2 : 4; -} IPMI_GET_CHANNEL_ACCESS_RESPONSE; - -// -// Definitions for Get Channel Info command -// -#define IPMI_APP_GET_CHANNEL_INFO 0x42 - -// -// Constants and Structure definitions for "Get Channel Info" command to follow here -// -typedef struct { - UINT8 ChannelNo : 4; - UINT8 Reserve1 : 4; - UINT8 ChannelMediumType : 7; - UINT8 Reserve2 : 1; - UINT8 ChannelProtocolType : 5; - UINT8 Reserve3 : 3; - UINT8 ActiveSessionCount : 6; - UINT8 SessionSupport : 2; - UINT32 VendorId : 24; - UINT16 AuxChannelInfo : 16; - UINT8 Dummy; -} IPMI_CHANNEL_INFO; - -// -// Definitions for Get Channel Info command -// -#define IPMI_APP_GET_CHANNEL_INFO 0x42 - -// -// Constants and Structure definitions for "Get Channel Info" command to follow here -// - -// -// Definitions for Set User Access command -// -#define IPMI_APP_SET_USER_ACCESS 0x43 - -// -// Constants and Structure definitions for "Set User Access" command to follow here -// - -// -// Definitions for Get User Access command -// -#define IPMI_APP_GET_USER_ACCESS 0x44 - -// -// Constants and Structure definitions for "Get User Access" command to follow here -// - -// -// Definitions for Set User Name command -// -#define IPMI_APP_SET_USER_NAME 0x45 - -// -// Constants and Structure definitions for "Set User Name" command to follow here -// - -// -// Definitions for Get User Name command -// -#define IPMI_APP_GET_USER_NAME 0x46 - -// -// Constants and Structure definitions for "Get User Name" command to follow here -// - -// -// Definitions for Set User Password command -// -#define IPMI_APP_SET_USER_PASSWORD 0x47 - -// -// Constants and Structure definitions for "Set User Password" command to follow here -// - -// -// Below is Definitions for RMCP+ Support and Payload Commands (Chapter 24) -// - -// -// Definitions for Activate Payload command -// -#define IPMI_APP_ACTIVATE_PAYLOAD 0x48 - -// -// Constants and Structure definitions for "Activate Payload" command to follow here -// - -// -// Definitions for De-Activate Payload command -// -#define IPMI_APP_DEACTIVATE_PAYLOAD 0x49 - -// -// Constants and Structure definitions for "DeActivate Payload" command to follow here -// - -// -// Definitions for Get Payload activation Status command -// -#define IPMI_APP_GET_PAYLOAD_ACTIVATION_STATUS 0x4a - -// -// Constants and Structure definitions for "Get Payload activation Status" command to follow here -// - -// -// Definitions for Get Payload Instance Info command -// -#define IPMI_APP_GET_PAYLOAD_INSTANCE_INFO 0x4b - -// -// Constants and Structure definitions for "Get Payload Instance Info" command to follow here -// - -// -// Definitions for Set User Payload Access command -// -#define IPMI_APP_SET_USER_PAYLOAD_ACCESS 0x4C - -// -// Constants and Structure definitions for "Set User Payload Access" command to follow here -// - -// -// Definitions for Get User Payload Access command -// -#define IPMI_APP_GET_USER_PAYLOAD_ACCESS 0x4D - -// -// Constants and Structure definitions for "Get User Payload Access" command to follow here -// - -// -// Definitions for Get Channel Payload Support command -// -#define IPMI_APP_GET_CHANNEL_PAYLOAD_SUPPORT 0x4E - -// -// Constants and Structure definitions for "Get Channel Payload Support" command to follow here -// - -// -// Definitions for Get Channel Payload Version command -// -#define IPMI_APP_GET_CHANNEL_PAYLOAD_VERSION 0x4F - -// -// Constants and Structure definitions for "Get Channel Payload Version" command to follow here -// - -// -// Definitions for Get Channel OEM Payload Info command -// -#define IPMI_APP_GET_CHANNEL_OEM_PAYLOAD_INFO 0x50 - -// -// Constants and Structure definitions for "Get Channel OEM Payload Info" command to follow here -// - -// -// Definitions for Master Write-Read command -// -#define IPMI_APP_MASTER_WRITE_READ 0x52 - -// -// Constants and Structure definitions for "Master Write Read" command to follow here -// - -// -// Definitions for Get Channel Cipher Suites command -// -#define IPMI_APP_GET_CHANNEL_CIPHER_SUITES 0x54 - -// -// Constants and Structure definitions for "Get Channel Cipher Suites" command to follow here -// - -// -// Below is Definitions for RMCP+ Support and Payload Commands (Chapter 24, Section 3) -// - -// -// Definitions for Suspend-Resume Payload Encryption command -// -#define IPMI_APP_SUSPEND_RESUME_PAYLOAD_ENCRYPTION 0x55 - -// -// Constants and Structure definitions for "Suspend-Resume Payload Encryption" command to follow here -// - -// -// Below is Definitions for IPMI Messaging Support Commands (Chapter 22, Section 25 and 9) -// - -// -// Definitions for Set Channel Security Keys command -// -#define IPMI_APP_SET_CHANNEL_SECURITY_KEYS 0x56 - -// -// Constants and Structure definitions for "Set Channel Security Keys" command to follow here -// - -// -// Definitions for Get System Interface Capabilities command -// -#define IPMI_APP_GET_SYSTEM_INTERFACE_CAPABILITIES 0x57 - -// -// Constants and Structure definitions for "Get System Interface Capabilities" command to follow here -// - -#pragma pack() -#endif diff --git a/MdePkg/Include/IndustryStandard/IpmiNetFnBridgeDefinitions.h b/MdePkg/Include/IndustryStandard/IpmiNetFnBridgeDefinitions.h deleted file mode 100644 index 9189028..0000000 --- a/MdePkg/Include/IndustryStandard/IpmiNetFnBridgeDefinitions.h +++ /dev/null @@ -1,243 +0,0 @@ -/** @file - IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. - IPMI Intelligent Chassis Management Bus Bridge Specification Version 1.0, - Revision 1.3. - - See IPMI specification, Appendix G, Command Assignments - and Appendix H, Sub-function Assignments. - - Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IPMINETFNBRIDGEDEFINITIONS_H_ -#define _IPMINETFNBRIDGEDEFINITIONS_H_ - -// -// Net function definition for Bridge command -// -#define IPMI_NETFN_BRIDGE 0x02 - -// -// Definitions for Get Bridge State command -// -#define IPMI_BRIDGE_GET_STATE 0x00 - -// -// Constants and Structure definitions for "Get Bridge State" command to follow here -// - -// -// Definitions for Set Bridge State command -// -#define IPMI_BRIDGE_SET_STATE 0x01 - -// -// Constants and Structure definitions for "Set Bridge State" command to follow here -// - -// -// Definitions for Get ICMB Address command -// -#define IPMI_BRIDGE_GET_ICMB_ADDRESS 0x02 - -// -// Constants and Structure definitions for "Get ICMB Address" command to follow here -// - -// -// Definitions for Set ICMB Address command -// -#define IPMI_BRIDGE_SET_ICMB_ADDRESS 0x03 - -// -// Constants and Structure definitions for "Set ICMB Address" command to follow here -// - -// -// Definitions for Set Bridge Proxy Address command -// -#define IPMI_BRIDGE_SET_PROXY_ADDRESS 0x04 - -// -// Constants and Structure definitions for "Set Bridge Proxy Address" command to follow here -// - -// -// Definitions for Get Bridge Statistics command -// -#define IPMI_BRIDGE_GET_BRIDGE_STATISTICS 0x05 - -// -// Constants and Structure definitions for "Get Bridge Statistics" command to follow here -// - -// -// Definitions for Get ICMB Capabilities command -// -#define IPMI_BRIDGE_GET_ICMB_CAPABILITIES 0x06 - -// -// Constants and Structure definitions for "Get ICMB Capabilities" command to follow here -// - -// -// Definitions for Clear Bridge Statistics command -// -#define IPMI_BRIDGE_CLEAR_STATISTICS 0x08 - -// -// Constants and Structure definitions for "Clear Bridge Statistics" command to follow here -// - -// -// Definitions for Get Bridge Proxy Address command -// -#define IPMI_BRIDGE_GET_PROXY_ADDRESS 0x09 - -// -// Constants and Structure definitions for "Get Bridge Proxy Address" command to follow here -// - -// -// Definitions for Get ICMB Connector Info command -// -#define IPMI_BRIDGE_GET_ICMB_CONNECTOR_INFO 0x0A - -// -// Constants and Structure definitions for "Get ICMB Connector Info " command to follow here -// - -// -// Definitions for Get ICMB Connection ID command -// -#define IPMI_BRIDGE_GET_ICMB_CONNECTION_ID 0x0B - -// -// Constants and Structure definitions for "Get ICMB Connection ID" command to follow here -// - -// -// Definitions for Get ICMB Connection ID command -// -#define IPMI_BRIDGE_SEND_ICMB_CONNECTION_ID 0x0C - -// -// Constants and Structure definitions for "Send ICMB Connection ID" command to follow here -// - -// -// Definitions for Prepare for Discoveery command -// -#define IPMI_BRIDGE_PREPARE_FOR_DISCOVERY 0x10 - -// -// Constants and Structure definitions for "Prepare for Discoveery" command to follow here -// - -// -// Definitions for Get Addresses command -// -#define IPMI_BRIDGE_GET_ADDRESSES 0x11 - -// -// Constants and Structure definitions for "Get Addresses" command to follow here -// - -// -// Definitions for Set Discovered command -// -#define IPMI_BRIDGE_SET_DISCOVERED 0x12 - -// -// Constants and Structure definitions for "Set Discovered" command to follow here -// - -// -// Definitions for Get Chassis Device ID command -// -#define IPMI_BRIDGE_GET_CHASSIS_DEVICEID 0x13 - -// -// Constants and Structure definitions for "Get Chassis Device ID" command to follow here -// - -// -// Definitions for Set Chassis Device ID command -// -#define IPMI_BRIDGE_SET_CHASSIS_DEVICEID 0x14 - -// -// Constants and Structure definitions for "Set Chassis Device ID" command to follow here -// - -// -// Definitions for Bridge Request command -// -#define IPMI_BRIDGE_REQUEST 0x20 - -// -// Constants and Structure definitions for "Bridge Request" command to follow here -// - -// -// Definitions for Bridge Message command -// -#define IPMI_BRIDGE_MESSAGE 0x21 - -// -// Constants and Structure definitions for "Bridge Message" command to follow here -// - -// -// Definitions for Get Event Count command -// -#define IPMI_BRIDGE_GET_EVENT_COUNT 0x30 - -// -// Constants and Structure definitions for "Get Event Count" command to follow here -// - -// -// Definitions for Set Event Destination command -// -#define IPMI_BRIDGE_SET_EVENT_DESTINATION 0x31 - -// -// Constants and Structure definitions for "Set Event Destination" command to follow here -// - -// -// Definitions for Set Event Reception State command -// -#define IPMI_BRIDGE_SET_EVENT_RECEPTION_STATE 0x32 - -// -// Constants and Structure definitions for "Set Event Reception State" command to follow here -// - -// -// Definitions for Set Event Reception State command -// -#define IPMI_BRIDGE_SET_EVENT_RECEPTION_STATE 0x32 - -// -// Constants and Structure definitions for "Set Event Reception State" command to follow here -// - -// -// Definitions for Send ICMB Event Message command -// -#define IPMI_BRIDGE_SEND_ICMB_EVENT_MESSAGE 0x33 - -// -// Constants and Structure definitions for "Send ICMB Event Message" command to follow here -// - -#endif diff --git a/MdePkg/Include/IndustryStandard/IpmiNetFnChassisDefinitions.h b/MdePkg/Include/IndustryStandard/IpmiNetFnChassisDefinitions.h deleted file mode 100644 index b0b776f..0000000 --- a/MdePkg/Include/IndustryStandard/IpmiNetFnChassisDefinitions.h +++ /dev/null @@ -1,304 +0,0 @@ -/** @file - IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. - - This file contains all NetFn Chassis commands, including: - Chassis Commands (Chapter 28) - - See IPMI specification, Appendix G, Command Assignments - and Appendix H, Sub-function Assignments. - - Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IPMINETFNCHASSISDEFINITIONS_H_ -#define _IPMINETFNCHASSISDEFINITIONS_H_ - -#pragma pack (1) -// -// Net function definition for Chassis command -// -#define IPMI_NETFN_CHASSIS 0x00 - -// -// Below is Definitions for Chassis commands (Chapter 28) -// - -// -// Definitions for Get Chassis Capabilities command -// -#define IPMI_CHASSIS_GET_CAPABILITIES 0x00 - -// -// Constants and Structure definitions for "Get Chassis Capabilities" command to follow here -// - -// -// Definitions for Get Chassis Status command -// -#define IPMI_CHASSIS_GET_STATUS 0x01 - -// -// Constants and Structure definitions for "Get Chassis Status" command to follow here -// - -// -// Definitions for Chassis Control command -// -#define IPMI_CHASSIS_CONTROL 0x02 - -// -// Constants and Structure definitions for "Chassis Control" command to follow here -// - -// -// Definitions for Chassis Reset command -// -#define IPMI_CHASSIS_RESET 0x03 - -// -// Constants and Structure definitions for "Chassis Reset" command to follow here -// - -// -// Definitions for Chassis Identify command -// -#define IPMI_CHASSIS_IDENTIFY 0x04 - -// -// Constants and Structure definitions for "Chassis Identify" command to follow here -// - -// -// Definitions for Set Chassis Capabilities command -// -#define IPMI_CHASSIS_SET_CAPABILITIES 0x05 - -// -// Constants and Structure definitions for "Set Chassis Capabilities" command to follow here -// - -// -// Definitions for Set Power Restore Policy command -// -#define IPMI_CHASSIS_SET_POWER_RESTORE_POLICY 0x06 - -// -// Constants and Structure definitions for "Set Power Restore Policy" command to follow here -// - -// -// Definitions for Get System Restart Cause command -// -#define IPMI_CHASSIS_GET_SYSTEM_RESTART_CAUSE 0x07 - -// -// Constants and Structure definitions for "Get System Restart Cause" command to follow here -// -typedef enum { - Unknown, - ChassisControlCommand, - ResetViaPushButton, - PowerupViaPowerButton, - WatchdogExpiration, - Oem, - AutoPowerOnAlwaysRestore, - AutoPowerOnRestorePrevious, - ResetViaPef, - PowerCycleViaPef, - SoftReset, - PowerUpViaRtc -} IPMI_SYSTEM_RESTART_CAUSE; - -typedef struct { - UINT8 Cause:4; - UINT8 Reserved:4; - UINT8 ChannelNumber; -} GET_SYSTEM_RESTART_CAUSE_RESPONSE; - -// -// Definitions for Set System BOOT options command -// -#define IPMI_CHASSIS_SET_SYSTEM_BOOT_OPTIONS 0x08 - -// -// Constants and Structure definitions for "Set System boot options" command to follow here -// -typedef struct { - UINT8 ParameterSelector:7; - UINT8 MarkParameterInvalid:1; - UINT8 ParameterData[1]; -} IPMI_SET_BOOT_OPTIONS_REQUEST; - -typedef struct { - UINT8 CompletionCode:8; -} IPMI_SET_BOOT_OPTIONS_RESPONSE; - -// -// Definitions for Get System BOOT options command -// -#define IPMI_CHASSIS_GET_SYSTEM_BOOT_OPTIONS 0x09 - -// -// Constants and Structure definitions for "Get System boot options" command to follow here -// -typedef struct { - UINT8 Parameter; - UINT8 Valid; - UINT8 Data1; - UINT8 Data2; - UINT8 Data3; - UINT8 Data4; - UINT8 Data5; -} IPMI_GET_THE_SYSTEM_BOOT_OPTIONS; - -typedef struct { - UINT8 ParameterVersion; - UINT8 ParameterValid; - UINT8 ChannelNumber; - UINT32 SessionId; - UINT32 TimeStamp; - UINT8 Reserved[3]; -} IPMI_BOOT_INITIATOR; - -typedef struct { - UINT8 ParameterSelector; - UINT8 SetSelector; - UINT8 BlockSelector; -} IPMI_GET_BOOT_OPTIONS_REQUEST; - -// -// Response Parameters for IPMI Get Boot Options -// -typedef struct { - UINT8 SetInProgress: 2; - UINT8 Reserved: 6; -} IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_0; - -typedef struct { - UINT8 ServicePartitionSelector; -} IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_1; - -typedef struct { - UINT8 ServicePartitionDiscovered:1; - UINT8 ServicePartitionScanRequest:1; - UINT8 Reserved: 5; -} IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_2; - -typedef struct { - UINT8 BmcBootFlagValid: 5; - UINT8 Reserved: 3; -} IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_3; - -typedef struct { - UINT8 WriteMask; - UINT8 BootInitiatorAcknowledgeData; -} IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_4; - -#define BOOT_OPTION_HANDLED_BY_BIOS 0x01 - -typedef struct { - // - // Data 1 - // - UINT8 Reserved0:6; - UINT8 PersistentOptions:1; - UINT8 BootFlagValid:1; - // - // Data 2 - // - UINT8 LockReset:1; - UINT8 ScreenBlank:1; - UINT8 BootDeviceSelector:4; - UINT8 LockKeyboard:1; - UINT8 CmosClear:1; - // - // - // Data 3 - UINT8 ConsoleRedirection:2; - UINT8 LockSleep:1; - UINT8 UserPasswordBypass:1; - UINT8 ForceProgressEventTrap:1; - UINT8 BiosVerbosity:2; - UINT8 LockPower:1; - // - // Data 4 - // - UINT8 BiosMuxControlOverride:2; - UINT8 BiosSharedModeOverride:1; - UINT8 Reserved1:4; -} IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_5; - -typedef struct { - UINT8 ChannelNumber:4; - UINT8 Reserved:4; - UINT8 SessionId[4]; - UINT8 BootInfoTimeStamp[4]; -} IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_6; - -typedef struct { - UINT8 SetSelector; - UINT8 BlockData[16]; -} IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_7; - -typedef union { - IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_0 Parm0; - IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_1 Parm1; - IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_2 Parm2; - IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_3 Parm3; - IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_4 Parm4; - IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_5 Parm5; - IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_6 Parm6; - IPMI_BOOT_OPTIONS_RESPONSE_PARAMETER_7 Parm7; -} IPMI_BOOT_OPTIONS_PARAMETERS; - -typedef struct { - UINT8 ParameterVersion:4; - UINT8 Reserved:4; - UINT8 ParameterSelector:7; - UINT8 ParameterValid:1; - UINT8 ParameterData[1]; -} IPMI_GET_BOOT_OPTIONS_RESPONSE; - -// -// Definitions for Set front panel button enables command -// -#define IPMI_CHASSIS_SET_FP_BUTTON_ENABLES 0x0A - -typedef struct { - UINT8 DisablePoweroffButton:1; - UINT8 DisableResetButton:1; - UINT8 DisableDiagnosticInterruptButton:1; - UINT8 DisableStandbyButton:1; - UINT8 Reserved:4; -} IPMI_SET_FRONT_PANEL_BUTTON_ENABLES_REQUEST; - -// -// Constants and Structure definitions for "Set front panel button enables" command to follow here -// - -// -// Definitions for Set Power Cycle Interval command -// -#define IPMI_CHASSIS_SET_POWER_CYCLE_INTERVALS 0x0B - -// -// Constants and Structure definitions for "Set Power Cycle Interval" command to follow here -// - -// -// Definitions for Get POH Counter command -// -#define IPMI_CHASSIS_GET_POH_COUNTER 0x0F - -// -// Constants and Structure definitions for "Get POH Counter" command to follow here -// -#pragma pack() -#endif diff --git a/MdePkg/Include/IndustryStandard/IpmiNetFnFirmwareDefinitions.h b/MdePkg/Include/IndustryStandard/IpmiNetFnFirmwareDefinitions.h deleted file mode 100644 index a282b1a..0000000 --- a/MdePkg/Include/IndustryStandard/IpmiNetFnFirmwareDefinitions.h +++ /dev/null @@ -1,26 +0,0 @@ -/** @file - IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. - - Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IPMINETFNFIRMWAREDEFINITIONS_H_ -#define _IPMINETFNFIRMWAREDEFINITIONS_H_ - -// -// Net function definition for Firmware command -// -#define IPMI_NETFN_FIRMWARE 0x08 - -// -// All Firmware commands and their structure definitions to follow here -// - -#endif diff --git a/MdePkg/Include/IndustryStandard/IpmiNetFnGroupExtensionDefinitions.h b/MdePkg/Include/IndustryStandard/IpmiNetFnGroupExtensionDefinitions.h deleted file mode 100644 index aa97d5f..0000000 --- a/MdePkg/Include/IndustryStandard/IpmiNetFnGroupExtensionDefinitions.h +++ /dev/null @@ -1,26 +0,0 @@ -/** @file - IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. - - Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IPMINETFNGROUPEXTDEFINITIONS_H_ -#define _IPMINETFNGROUPEXTDEFINITIONS_H_ - -// -// Net function definition for Group Extension command -// -#define IPMI_NETFN_GROUP_EXT 0x2C - -// -// All Group Extension commands and their structure definitions to follow here -// - -#endif diff --git a/MdePkg/Include/IndustryStandard/IpmiNetFnSensorEventDefinitions.h b/MdePkg/Include/IndustryStandard/IpmiNetFnSensorEventDefinitions.h deleted file mode 100644 index 0fd1d5f..0000000 --- a/MdePkg/Include/IndustryStandard/IpmiNetFnSensorEventDefinitions.h +++ /dev/null @@ -1,52 +0,0 @@ -/** @file - IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. - - This file contains all NetFn Sensor/Event commands, including: - Event Commands (Chapter 29) - PEF and Alerting Commands (Chapter 30) - Sensor Device Commands (Chapter 35) - - See IPMI specification, Appendix G, Command Assignments - and Appendix H, Sub-function Assignments. - - Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IPMINETFNSENSORDEFINITIONS_H_ -#define _IPMINETFNSENSORDEFINITIONS_H_ - -#pragma pack(1) -// -// Net function definition for Sensor command -// -#define IPMI_NETFN_SENSOR_EVENT 0x04 - -// -// All Sensor commands and their structure definitions to follow here -// - -// -// Definitions for Send Platform Event Message command -// -#define IPMI_SENSOR_PLATFORM_EVENT_MESSAGE 0x02 - -typedef struct { - UINT8 GeneratorId; - UINT8 EvMRevision; - UINT8 SensorType; - UINT8 SensorNumber; - UINT8 EventDirType; - UINT8 OEMEvData1; - UINT8 OEMEvData2; - UINT8 OEMEvData3; -} IPMI_PLATFORM_EVENT_MESSAGE_DATA; - -#pragma pack() -#endif diff --git a/MdePkg/Include/IndustryStandard/IpmiNetFnStorageDefinitions.h b/MdePkg/Include/IndustryStandard/IpmiNetFnStorageDefinitions.h deleted file mode 100644 index 2395f25..0000000 --- a/MdePkg/Include/IndustryStandard/IpmiNetFnStorageDefinitions.h +++ /dev/null @@ -1,534 +0,0 @@ -/** @file - IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. - - This file contains all NetFn Storage commands, including: - FRU Inventory Commands (Chapter 34) - SDR Repository (Chapter 33) - System Event Log(SEL) Commands (Chapter 31) - - See IPMI specification, Appendix G, Command Assignments - and Appendix H, Sub-function Assignments. - - Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IPMINETFNSTORAGEDEFINITIONS_H_ -#define _IPMINETFNSTORAGEDEFINITIONS_H_ - -#pragma pack(1) -// -// Net function definition for Storage command -// -#define IPMI_NETFN_STORAGE 0x0A - -// -// All Storage commands and their structure definitions to follow here -// - -// -// Below is Definitions for FRU Inventory Commands (Chapter 34) -// - -// -// Definitions for Get Fru Inventory Area Info command -// -#define IPMI_STORAGE_GET_FRU_INVENTORY_AREAINFO 0x10 - -// -// Constants and Structure definitions for "Get Fru Inventory Area Info" command to follow here -// - -// -// Definitions for Get Fru Data command -// -#define IPMI_STORAGE_READ_FRU_DATA 0x11 - -// -// Constants and Structure definitions for "Get Fru Data" command to follow here -// -typedef struct { - UINT8 FruDeviceId; - UINT16 FruOffset; -} IPMI_FRU_COMMON_DATA; - -typedef struct { - IPMI_FRU_COMMON_DATA Data; - UINT8 Count; -} IPMI_FRU_READ_COMMAND; - -// -// Definitions for Write Fru Data command -// -#define IPMI_STORAGE_WRITE_FRU_DATA 0x12 - -// -// Constants and Structure definitions for "Write Fru Data" command to follow here -// -typedef struct { - IPMI_FRU_COMMON_DATA Data; - UINT8 FruData[16]; -} IPMI_FRU_WRITE_COMMAND; - -// -// Below is Definitions for SDR Repository (Chapter 33) -// - -// -// Definitions for Get SDR Repository Info command -// -#define IPMI_STORAGE_GET_SDR_REPOSITORY_INFO 0x20 - -// -// Constants and Structure definitions for "Get SDR Repository Info" command to follow here -// -typedef struct { - UINT8 Version; - UINT16 RecordCount; - UINT16 FreeSpace; - UINT32 RecentAdditionTimeStamp; - UINT32 RecentEraseTimeStamp; - UINT8 SdrRepAllocInfoCmd : 1; - UINT8 SdrRepReserveCmd : 1; - UINT8 PartialAddSdrCmd : 1; - UINT8 DeleteSdrRepCmd : 1; - UINT8 Reserved : 1; - UINT8 SdrRepUpdateOp : 2; - UINT8 Overflow : 1; -} IPMI_SDR_REPOSITORY_INFO; - -// -// Definitions for Get SDR Repository Allocateion Info command -// -#define IPMI_STORAGE_GET_SDR_REPOSITORY_ALLOCATION_INFO 0x21 - -// -// Constants and Structure definitions for "Get SDR Repository Allocateion Info" command to follow here -// - -// -// Definitions for Reserve SDR Repository command -// -#define IPMI_STORAGE_RESERVE_SDR_REPOSITORY 0x22 - -// -// Constants and Structure definitions for "Reserve SDR Repository" command to follow here -// - -// -// Definitions for Get SDR command -// -#define IPMI_STORAGE_GET_SDR 0x23 - -// -// Constants and Structure definitions for "Get SDR" command to follow here -// - -typedef struct { - UINT16 RecordId; // 1 - UINT8 Version; // 3 - UINT8 RecordType; // 4 - UINT8 RecordLength; // 5 - UINT8 OwnerId; // 6 - UINT8 OwnerLun; // 7 - UINT8 SensorNumber; // 8 - UINT8 EntityId; // 9 - UINT8 EntityInstance; // 10 - UINT8 EventScanningEnabled : 1; // 11 - UINT8 EventScanningDisabled : 1; // 11 - UINT8 InitSensorType : 1; // 11 - UINT8 InitHysteresis : 1; // 11 - UINT8 InitThresholds : 1; // 11 - UINT8 InitEvent : 1; // 11 - UINT8 InitScanning : 1; // 11 - UINT8 Reserved : 1; // 11 - UINT8 EventMessageControl : 2; // 12 - UINT8 ThresholdAccessSupport : 2; // 12 - UINT8 HysteresisSupport : 2; // 12 - UINT8 ReArmSupport : 1; // 12 - UINT8 IgnoreSensor : 1; // 12 - UINT8 SensorType; // 13 - UINT8 EventType; // 14 - UINT8 Reserved1[7]; // 15 - UINT8 UnitType; // 22 - UINT8 Reserved2; // 23 - UINT8 Linearization : 7; // 24 - UINT8 Reserved3 : 1; // 24 - UINT8 MLo; // 25 - UINT8 Toleremce : 6; // 26 - UINT8 MHi : 2; // 26 - UINT8 BLo; // 27 - UINT8 AccuracyLow : 6; // 28 - UINT8 BHi : 2; // 28 - UINT8 Reserved4 : 2; // 29 - UINT8 AccuracyExp : 2; // 29 - UINT8 AccuracyHi : 4; // 29 - UINT8 BExp : 4; // 30 - UINT8 RExp : 4; // 30 - UINT8 NominalReadingSpscified : 1; // 31 - UINT8 NominalMaxSpscified : 1; // 31 - UINT8 NominalMinSpscified : 1; // 31 - UINT8 Reserved5 : 5; // 31 - UINT8 NominalReading; // 32 - UINT8 Reserved6[4]; // 33 - UINT8 UpperNonRecoverThreshold; // 37 - UINT8 UpperCriticalThreshold; // 38 - UINT8 UpperNonCriticalThreshold; // 39 - UINT8 LowerNonRecoverThreshold; // 40 - UINT8 LowerCriticalThreshold; // 41 - UINT8 LowerNonCriticalThreshold; // 42 - UINT8 Reserved7[5]; // 43 - UINT8 IdStringLength; // 48 - UINT8 AsciiIdString[16]; // 49 - 64 -} IPMI_SDR_RECORD_STRUCT_1; - -typedef struct { - UINT16 RecordId; // 1 - UINT8 Version; // 3 - UINT8 RecordType; // 4 - UINT8 RecordLength; // 5 - UINT8 OwnerId; // 6 - UINT8 OwnerLun; // 7 - UINT8 SensorNumber; // 8 - UINT8 EntityId; // 9 - UINT8 EntityInstance; // 10 - UINT8 SensorScanning : 1; // 11 - UINT8 EventScanning : 1; // 11 - UINT8 InitSensorType : 1; // 11 - UINT8 InitHysteresis : 1; // 11 - UINT8 InitThresholds : 1; // 11 - UINT8 InitEvent : 1; // 11 - UINT8 InitScanning : 1; // 11 - UINT8 Reserved : 1; // 11 - UINT8 EventMessageControl : 2; // 12 - UINT8 ThresholdAccessSupport : 2; // 12 - UINT8 HysteresisSupport : 2; // 12 - UINT8 ReArmSupport : 1; // 12 - UINT8 IgnoreSensor : 1; // 12 - UINT8 SensorType; // 13 - UINT8 EventType; // 14 - UINT8 Reserved1[7]; // 15 - UINT8 UnitType; // 22 - UINT8 Reserved2[9]; // 23 - UINT8 IdStringLength; // 32 - UINT8 AsciiIdString[16]; // 33 - 48 -} IPMI_SDR_RECORD_STRUCT_2; - -typedef struct { - UINT8 Reserved1 : 1; - UINT8 ControllerSlaveAddress : 7; - UINT8 FruDeviceId; - UINT8 BusId : 3; - UINT8 Lun : 2; - UINT8 Reserved : 2; - UINT8 LogicalFruDevice : 1; - UINT8 Reserved3 : 4; - UINT8 ChannelNumber : 4; -} IPMI_FRU_DATA_INFO; - -typedef struct { - UINT16 RecordId; // 1 - UINT8 Version; // 3 - UINT8 RecordType; // 4 - UINT8 RecordLength; // 5 - IPMI_FRU_DATA_INFO FruDeviceData; // 6 - UINT8 Reserved1; // 10 - UINT8 DeviceType; // 11 - UINT8 DeviceTypeModifier; // 12 - UINT8 FruEntityId; // 13 - UINT8 FruEntityInstance; // 14 - UINT8 OemReserved; // 15 - UINT8 Length : 4; // 16 - UINT8 Reserved2 : 1; // 16 - UINT8 StringType : 3; // 16 - UINT8 String[16]; // 17 -} IPMI_SDR_RECORD_STRUCT_11; - -typedef struct { - UINT16 NextRecordId; //1 - UINT16 RecordId; //3 - UINT8 Version; //5 - UINT8 RecordType; //6 - UINT8 RecordLength; //7 - UINT8 ManufacturerId[3]; //8 - UINT8 StringChars[20]; -} IPMI_SDR_RECORD_STRUCT_C0; - -typedef struct { - UINT16 NextRecordId; //1 - UINT16 RecordId; //3 - UINT8 Version; //5 - UINT8 RecordType; //6 - UINT8 RecordLength; //7 -} IPMI_SDR_RECORD_STRUCT_HEADER; - -typedef union { - IPMI_SDR_RECORD_STRUCT_1 SensorType1; - IPMI_SDR_RECORD_STRUCT_2 SensorType2; - IPMI_SDR_RECORD_STRUCT_11 SensorType11; - IPMI_SDR_RECORD_STRUCT_C0 SensorTypeC0; - IPMI_SDR_RECORD_STRUCT_HEADER SensorHeader; -} IPMI_SENSOR_RECORD_STRUCT; - -typedef struct { - UINT16 ReservationId; - UINT16 RecordId; - UINT8 RecordOffset; - UINT8 BytesToRead; -} IPMI_GET_SDR; - -// -// Definitions for Add SDR command -// -#define IPMI_STORAGE_ADD_SDR 0x24 - -// -// Constants and Structure definitions for "Add SDR" command to follow here -// - -// -// Definitions for Partial Add SDR command -// -#define IPMI_STORAGE_PARTIAL_ADD_SDR 0x25 - -// -// Constants and Structure definitions for "Partial Add SDR" command to follow here -// - -// -// Definitions for Delete SDR command -// -#define IPMI_STORAGE_DELETE_SDR 0x26 - -// -// Constants and Structure definitions for "Delete SDR" command to follow here -// - -// -// Definitions for Clear SDR Repository command -// -#define IPMI_STORAGE_CLEAR_SDR 0x27 - -// -// Constants and Structure definitions for "Clear SDR Repository" command to follow here -// - -// -// Definitions for Get SDR Repository Time command -// -#define IPMI_STORAGE_GET_SDR_REPOSITORY_TIME 0x28 - -// -// Constants and Structure definitions for "Get SDR Repository Time" command to follow here -// - -// -// Definitions for Set SDR Repository Time command -// -#define IPMI_STORAGE_SET_SDR_REPOSITORY_TIME 0x29 - -// -// Constants and Structure definitions for "Set SDR Repository Time" command to follow here -// - -// -// Definitions for Enter SDR Repository Update Mode command -// -#define IPMI_STORAGE_ENTER_SDR_UPDATE_MODE 0x2A - -// -// Constants and Structure definitions for "Enter SDR Repository Update Mode" command to follow here -// - -// -// Definitions for Exit SDR Repository Update Mode command -// -#define IPMI_STORAGE_EXIT_SDR_UPDATE_MODE 0x2B - -// -// Constants and Structure definitions for "Exit SDR Repository Update Mode" command to follow here -// - -// -// Definitions for Run Initialize Agent command -// -#define IPMI_STORAGE_RUN_INIT_AGENT 0x2C - -// -// Constants and Structure definitions for "Run Initialize Agent" command to follow here -// - -// -// Below is Definitions for System Event Log(SEL) Commands (Chapter 31) -// - -// -// Definitions for Get SEL Info command -// -#define IPMI_STORAGE_GET_SEL_INFO 0x40 - -// -// Constants and Structure definitions for "Get SEL Info" command to follow here -// -typedef struct { - UINT8 Version; // Version of SEL - UINT16 NoOfEntries; // No of Entries in the SEL - UINT16 FreeSpace; // Free space in Bytes - UINT32 RecentAddTimeStamp; // Most Recent Addition of Time Stamp - UINT32 RecentEraseTimeStamp; // Most Recent Erasure of Time Stamp - UINT8 OperationSupport; // Operation Support -} IPMI_SEL_INFO; - -// -// Definitions for Get SEL Allocation Info command -// -#define IPMI_STORAGE_GET_SEL_ALLOCATION_INFO 0x41 - -// -// Constants and Structure definitions for "Get SEL Allocation Info" command to follow here -// - -// -// Definitions for Reserve SEL command -// -#define IPMI_STORAGE_RESERVE_SEL 0x42 - -// -// Constants and Structure definitions for "Reserve SEL" command to follow here -// - -// -// Definitions for Get SEL Entry command -// -#define IPMI_STORAGE_GET_SEL_ENTRY 0x43 - -// -// Constants and Structure definitions for "Get SEL Entry" command to follow here -// -#define IPMI_COMPLETE_SEL_RECORD 0xFF - -typedef struct { - UINT8 ReserveId[2]; // Reservation ID, LS Byte First - UINT8 SelRecID[2]; // Sel Record ID, LS Byte First - UINT8 Offset; // Offset Into Record - UINT8 BytesToRead; // Bytes to be Read, 0xFF for entire record -} IPMI_GET_SEL_ENTRY; - -// -// Definitions for Add SEL Entry command -// -#define IPMI_STORAGE_ADD_SEL_ENTRY 0x44 - -// -// Constants and Structure definitions for "Add SEL Entry" command to follow here -// -typedef struct { - UINT16 RecordId; - UINT8 RecordType; - UINT32 TimeStamp; - UINT16 GeneratorId; - UINT8 EvMRevision; - UINT8 SensorType; - UINT8 SensorNumber; - UINT8 EventDirType; - UINT8 OEMEvData1; - UINT8 OEMEvData2; - UINT8 OEMEvData3; -} IPMI_SEL_RECORD_DATA; - -#define IPMI_SEL_SYSTEM_RECORD 0x02 - -#define IPMI_EVM_REVISION 0x04 -#define IPMI_BIOS_ID 0x18 -#define IPMI_FORMAT_REV 0x00 -#define IPMI_FORMAT_REV1 0x01 -#define IPMI_SOFTWARE_ID 0x01 -#define IPMI_PLATFORM_VAL_ID 0x01 -#define IPMI_GENERATOR_ID(i,f) ((i << 1) | (f << 1) | IPMI_SOFTWARE_ID) - -#define IPMI_SENSOR_TYPE_EVENT_CODE_DISCRETE 0x6F - -#define IPMI_OEM_SPECIFIC_DATA 0x02 -#define IPMI_SENSOR_SPECIFIC_DATA 0x03 - -// -// Definitions for Partial Add SEL Entry command -// -#define IPMI_STORAGE_PARTIAL_ADD_SEL_ENTRY 0x45 - -// -// Constants and Structure definitions for "Partial Add SEL Entry" command to follow here -// - -// -// Definitions for Delete SEL Entry command -// -#define IPMI_STORAGE_DELETE_SEL_ENTRY 0x46 - -// -// Constants and Structure definitions for "Delete SEL Entry" command to follow here -// -typedef struct { - UINT8 ReserveId[2]; // Reservation ID, LS byte first - UINT8 RecordToDelete[2]; // Record to Delete, LS Byte First -} IPMI_DELETE_SEL; - -// -// Definitions for Clear SEL command -// -#define IPMI_STORAGE_CLEAR_SEL 0x47 - -// -// Constants and Structure definitions for "Clear SEL" command to follow here -// -typedef struct { - UINT8 Reserve[2]; // Reserve ID, LSB first - UINT8 AscC; // Ascii for 'C' (0x43) - UINT8 AscL; // Ascii for 'L' (0x4c) - UINT8 AscR; // Ascii for 'R' (0x52) - UINT8 Erase; // 0xAA, Initiate Erase, 0x00 Get Erase Status -} IPMI_CLEAR_SEL; - -// -// Definitions for Get SEL Time command -// -#define IPMI_STORAGE_GET_SEL_TIME 0x48 - -// -// Constants and Structure definitions for "Get SEL Time" command to follow here -// - -// -// Definitions for Set SEL Time command -// -#define IPMI_STORAGE_SET_SEL_TIME 0x49 - -// -// Constants and Structure definitions for "Set SEL Time" command to follow here -// - -// -// Definitions for Get Auxillary Log Status command -// -#define IPMI_STORAGE_GET_AUXILLARY_LOG_STATUS 0x5A - -// -// Constants and Structure definitions for "Get Auxillary Log Status" command to follow here -// - -// -// Definitions for Set Auxillary Log Status command -// -#define IPMI_STORAGE_SET_AUXILLARY_LOG_STATUS 0x5B - -// -// Constants and Structure definitions for "Set Auxillary Log Status" command to follow here -// -#pragma pack() -#endif diff --git a/MdePkg/Include/IndustryStandard/IpmiNetFnTransportDefinitions.h b/MdePkg/Include/IndustryStandard/IpmiNetFnTransportDefinitions.h deleted file mode 100644 index 929b506..0000000 --- a/MdePkg/Include/IndustryStandard/IpmiNetFnTransportDefinitions.h +++ /dev/null @@ -1,556 +0,0 @@ -/** @file - IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1. - - This file contains all NetFn Transport commands, including: - IPM LAN Commands (Chapter 23) - IPMI Serial/Modem Commands (Chapter 25) - SOL Commands (Chapter 26) - Command Forwarding Commands (Chapter 35b) - - See IPMI specification, Appendix G, Command Assignments - and Appendix H, Sub-function Assignments. - - Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IPMINETFNTRANSPORTDEFINITIONS_H_ -#define _IPMINETFNTRANSPORTDEFINITIONS_H_ - -#pragma pack(1) -// -// Net function definition for Transport command -// -#define IPMI_NETFN_TRANSPORT 0x0C - -// -// Below is Definitions for IPM LAN Commands (Chapter 23) -// - -// -// Definitions for Set Lan Configuration Parameters command -// -#define IPMI_TRANSPORT_SET_LAN_CONFIG_PARAMETERS 0x01 - -// -// Constants and Structure definitions for "Set Lan Configuration Parameters" command to follow here -// - -// -// LAN Management Structure -// -typedef enum { - IpmiLanReserved1, - IpmiLanReserved2, - IpmiLanAuthType, - IpmiLanIpAddress, - IpmiLanIpAddressSource, - IpmiLanMacAddress, - IpmiLanSubnetMask, - IpmiLanIpv4HeaderParam, - IpmiLanPrimaryRcmpPort, - IpmiLanSecondaryRcmpPort, - IpmiLanBmcGeneratedArpCtrl, - IpmiLanArpInterval, - IpmiLanDefaultGateway, - IpmiLanDefaultGatewayMac, - IpmiLanBackupGateway, - IpmiLanBackupGatewayMac, - IpmiLanCommunityString, - IpmiLanReserved3, - IpmiLanDestinationType, - IpmiLanDestinationAddress -} IPMI_LAN_OPTION_TYPE; - -// -// IP Address Source -// -typedef enum { - IpmiUnspecified, - IpmiStaticAddrsss, - IpmiDynamicAddressBmcDhcp, - IpmiDynamicAddressBiosDhcp, - IpmiDynamicAddressBmcNonDhcp -} IPMI_IP_ADDRESS_SRC; - -// -// Destination Type -// -typedef enum { - IpmiPetTrapDestination, - IpmiDirectedEventDestination, - IpmiReserved1, - IpmiReserved2, - IpmiReserved3, - IpmiReserved4, - IpmiReserved5, - IpmiOem1, - IpmiOem2 -} IPMI_LAN_DEST_TYPE_DEST_TYPE; - -typedef struct { - UINT8 NoAuth : 1; - UINT8 MD2Auth : 1; - UINT8 MD5Auth : 1; - UINT8 Reserved1 : 1; - UINT8 StraightPswd : 1; - UINT8 OemType : 1; - UINT8 Reserved2 : 2; -} IPMI_LAN_AUTH_TYPE; - -typedef struct { - UINT8 IpAddress[4]; -} IPMI_LAN_IP_ADDRESS; - -typedef struct { - UINT8 AddressSrc : 4; - UINT8 Reserved : 4; -} IPMI_LAN_IP_ADDRESS_SRC; - -typedef struct { - UINT8 MacAddress[6]; -} IPMI_LAN_MAC_ADDRESS; - -typedef struct { - UINT8 IpAddress[4]; -} IPMI_LAN_SUBNET_MASK; - -typedef struct { - UINT8 TimeToLive; - UINT8 IpFlag : 3; - UINT8 Reserved1 : 5; - UINT8 Precedence : 3; - UINT8 Reserved2 : 1; - UINT8 ServiceType : 4; -} IPMI_LAN_IPV4_HDR_PARAM; - -typedef struct { - UINT8 RcmpPortMsb; - UINT8 RcmpPortLsb; -} IPMI_LAN_RCMP_PORT; - -typedef struct { - UINT8 EnableBmcArpResponse : 1; - UINT8 EnableBmcGratuitousArp : 1; - UINT8 Reserved : 6; -} IPMI_LAN_BMC_GENERATED_ARP_CONTROL; - -typedef struct { - UINT8 ArpInterval; -} IPMI_LAN_ARP_INTERVAL; - -typedef struct { - UINT8 Data[18]; -} IPMI_LAN_COMMUNITY_STRING; - -typedef struct { - UINT8 DestinationSelector : 4; - UINT8 Reserved2 : 4; - UINT8 DestinationType : 3; - UINT8 Reserved1 : 4; - UINT8 AlertAcknowledged : 1; -} IPMI_LAN_DEST_TYPE; - -typedef struct { - UINT8 DestinationSelector : 4; - UINT8 Reserved1 : 4; - UINT8 AlertingIpAddressSelector : 4; - UINT8 AddressFormat : 4; - UINT8 UseDefaultGateway : 1; - UINT8 Reserved2 : 7; - IPMI_LAN_IP_ADDRESS AlertingIpAddress; - IPMI_LAN_MAC_ADDRESS AlertingMacAddress; -} IPMI_LAN_DEST_ADDRESS; - -typedef union { - IPMI_LAN_AUTH_TYPE IpmiLanAuthType; - IPMI_LAN_IP_ADDRESS IpmiLanIpAddress; - IPMI_LAN_IP_ADDRESS_SRC IpmiLanIpAddressSrc; - IPMI_LAN_MAC_ADDRESS IpmiLanMacAddress; - IPMI_LAN_SUBNET_MASK IpmiLanSubnetMask; - IPMI_LAN_IPV4_HDR_PARAM IpmiLanIpv4HdrParam; - IPMI_LAN_RCMP_PORT IpmiLanPrimaryRcmpPort; - IPMI_LAN_BMC_GENERATED_ARP_CONTROL IpmiLanArpControl; - IPMI_LAN_ARP_INTERVAL IpmiLanArpInterval; - IPMI_LAN_COMMUNITY_STRING IpmiLanCommunityString; - IPMI_LAN_DEST_TYPE IpmiLanDestType; - IPMI_LAN_DEST_ADDRESS IpmiLanDestAddress; -} IPMI_LAN_OPTIONS; - -// -// Definitions for Get Lan Configuration Parameters command -// -#define IPMI_TRANSPORT_GET_LAN_CONFIG_PARAMETERS 0x02 - -// -// Constants and Structure definitions for "Get Lan Configuration Parameters" command to follow here -// - -// -// Definitions for Suspend BMC ARPs command -// -#define IPMI_TRANSPORT_SUSPEND_BMC_ARPS 0x03 - -// -// Constants and Structure definitions for "Suspend BMC ARPs" command to follow here -// - -// -// Definitions for Get IP-UDP-RMCP Statistics command -// -#define IPMI_TRANSPORT_GET_PACKET_STATISTICS 0x04 - -// -// Constants and Structure definitions for "Get IP-UDP-RMCP Statistics" command to follow here -// - -// -// Below is Definitions for IPMI Serial/Modem Commands (Chapter 25) -// - -// -// Definitions for Set Serial/Modem Configuration command -// -#define IPMI_TRANSPORT_SET_SERIAL_CONFIGURATION 0x10 - -// -// Constants and Structure definitions for "Set Serial/Modem Configuration" command to follow here -// - -// -// EMP OPTION DATA -// -typedef struct { - UINT8 NoAuthentication : 1; - UINT8 MD2Authentication : 1; - UINT8 MD5Authentication : 1; - UINT8 Reserved1 : 1; - UINT8 StraightPassword : 1; - UINT8 OemProprietary : 1; - UINT8 Reservd2 : 2; -} IPMI_EMP_AUTH_TYPE; - -typedef struct { - UINT8 EnableBasicMode : 1; - UINT8 EnablePPPMode : 1; - UINT8 EnableTerminalMode : 1; - UINT8 Reserved1 : 2; - UINT8 SnoopOsPPPNegotiation : 1; - UINT8 Reserved2 : 1; - UINT8 DirectConnect : 1; -} IPMI_EMP_CONNECTION_TYPE; - -typedef struct { - UINT8 InactivityTimeout : 4; - UINT8 Reserved : 4; -} IPMI_EMP_INACTIVITY_TIMEOUT; - -typedef struct { - UINT8 IpmiCallback : 1; - UINT8 CBCPCallback : 1; - UINT8 Reserved1 : 6; - UINT8 CbcpEnableNoCallback : 1; - UINT8 CbcpEnablePreSpecifiedNumber : 1; - UINT8 CbcpEnableUserSpecifiedNumber : 1; - UINT8 CbcpEnableCallbackFromList : 1; - UINT8 Reserved : 4; - UINT8 CallbackDestination1; - UINT8 CallbackDestination2; - UINT8 CallbackDestination3; -} IPMI_EMP_CHANNEL_CALLBACK_CONTROL; - -typedef struct { - UINT8 CloseSessionOnDCDLoss : 1; - UINT8 EnableSessionInactivityTimeout : 1; - UINT8 Reserved : 6; -} IPMI_EMP_SESSION_TERMINATION; - -typedef struct { - UINT8 Reserved1 : 5; - UINT8 EnableDtrHangup : 1; - UINT8 FlowControl : 2; - UINT8 BitRate : 4; - UINT8 Reserved2 : 4; - UINT8 SaveSetting : 1; - UINT8 SetComPort : 1; - UINT8 Reserved3 : 6; -} IPMI_EMP_MESSAGING_COM_SETTING; - -typedef struct { - UINT8 RingDurationInterval : 6; - UINT8 Reserved1 : 2; - UINT8 RingDeadTime : 4; - UINT8 Reserved : 4; -} IPMI_EMP_MODEM_RING_TIME; - -typedef struct { - UINT8 Reserved; - UINT8 InitString[48]; -} IPMI_EMP_MODEM_INIT_STRING; - -typedef struct { - UINT8 EscapeSequence[5]; -} IPMI_EMP_MODEM_ESC_SEQUENCE; - -typedef struct { - UINT8 HangupSequence[8]; -} IPMI_EMP_MODEM_HANGUP_SEQUENCE; - -typedef struct { - UINT8 ModelDialCommend[8]; -} IPMI_MODEM_DIALUP_COMMAND; - -typedef struct { - UINT8 PageBlackoutInterval; -} IPMI_PAGE_BLACKOUT_INTERVAL; - -typedef struct { - UINT8 CommunityString[18]; -} IPMI_EMP_COMMUNITY_STRING; - -typedef struct { - UINT8 DestinationSelector : 4; - UINT8 Reserved1 : 4; - UINT8 DestinationType : 4; - UINT8 Reserved2 : 3; - UINT8 AlertAckRequired : 1; - UINT8 AlertAckTimeoutSeconds; - UINT8 NumRetriesCall : 3; - UINT8 Reserved3 : 1; - UINT8 NumRetryAlert : 3; - UINT8 Reserved4 : 1; - union { - struct { - UINT8 Reserved5 : 4; - UINT8 DialStringSelector : 4; - } DIAL_PAGE_DESTINATION; - struct { - UINT8 TapAccountSelector : 4; - UINT8 Reserved : 4; - } TAP_PAGE_DESTINATION; - struct { - UINT8 PPPAccountSetSelector; - UINT8 DialStringSelector; - } PPP_ALERT_DESTINATION; - } DEST_TYPE_SPECIFIC; -} IPMI_EMP_DESTINATION_INFO; - -typedef struct { - UINT8 DestinationSelector : 4; - UINT8 Reserved1 : 4; - UINT8 Parity : 3; - UINT8 CharacterSize : 1; - UINT8 StopBit : 1; - UINT8 DtrHangup : 1; - UINT8 FlowControl : 2; - UINT8 BitRate : 4; - UINT8 Reserved2 : 4; - UINT8 SaveSetting : 1; - UINT8 SetComPort : 1; - UINT8 Reserved3 : 6; -} IPMI_EMP_DESTINATION_COM_SETTING; - -typedef struct { - UINT8 DialStringSelector : 4; - UINT8 Reserved1 : 4; - UINT8 Reserved2; - UINT8 DialString[48]; -} IPMI_DESTINATION_DIAL_STRING; - -typedef struct { - UINT8 IpAddressSelector : 4; - UINT8 Reserved1 : 4; - union { - UINT32 IpAddressLong; - UINT8 IpAddress[4]; - } PPP_IP_ADDRESS; -} IPMI_DESTINATION_IP_ADDRESS; - -typedef struct { - UINT8 TapSelector; - UINT8 TapServiceSelector : 4; - UINT8 TapDialStringSelector : 4; -} IPMI_DESTINATION_TAP_ACCOUNT; - -typedef struct { - UINT8 TapSelector; - UINT8 PagerIdString[16]; -} IPMI_TAP_PAGER_ID_STRING; - -typedef union { - UINT8 OptionData; - IPMI_EMP_AUTH_TYPE EmpAuthType; - IPMI_EMP_CONNECTION_TYPE EmpConnectionType; - IPMI_EMP_INACTIVITY_TIMEOUT EmpInactivityTimeout; - IPMI_EMP_CHANNEL_CALLBACK_CONTROL EmpCallbackControl; - IPMI_EMP_SESSION_TERMINATION EmpSessionTermination; - IPMI_EMP_MESSAGING_COM_SETTING EmpMessagingComSetting; - IPMI_EMP_MODEM_RING_TIME EmpModemRingTime; - IPMI_EMP_MODEM_INIT_STRING EmpModemInitString; - IPMI_EMP_MODEM_ESC_SEQUENCE EmpModemEscSequence; - IPMI_EMP_MODEM_HANGUP_SEQUENCE EmpModemHangupSequence; - IPMI_MODEM_DIALUP_COMMAND EmpModemDialupCommand; - IPMI_PAGE_BLACKOUT_INTERVAL EmpPageBlackoutInterval; - IPMI_EMP_COMMUNITY_STRING EmpCommunityString; - IPMI_EMP_DESTINATION_INFO EmpDestinationInfo; - IPMI_EMP_DESTINATION_COM_SETTING EmpDestinationComSetting; - UINT8 CallRetryBusySignalInterval; - IPMI_DESTINATION_DIAL_STRING DestinationDialString; - IPMI_DESTINATION_IP_ADDRESS DestinationIpAddress; - IPMI_DESTINATION_TAP_ACCOUNT DestinationTapAccount; - IPMI_TAP_PAGER_ID_STRING TapPagerIdString; -} IPMI_EMP_OPTIONS; - -// -// Definitions for Get Serial/Modem Configuration command -// -#define IPMI_TRANSPORT_GET_SERIAL_CONFIGURATION 0x11 - -// -// Constants and Structure definitions for "Get Serial/Modem Configuration" command to follow here -// - -// -// Definitions for Set Serial/Modem Mux command -// -#define IPMI_TRANSPORT_SET_SERIAL_MUX 0x12 - -// -// Constants and Structure definitions for "Set Serial/Modem Mux" command to follow here -// -typedef struct { - UINT8 ChannelNo : 4; - UINT8 Reserved1 : 4; - UINT8 MuxSetting : 4; - UINT8 Reserved2 : 4; -} IPMI_SET_MUX_COMMAND; - -typedef struct { - UINT8 MuxSetToBmc : 1; - UINT8 CommandStatus : 1; - UINT8 MessagingSessionActive : 1; - UINT8 AlertInProgress : 1; - UINT8 Reserved2 : 2; - UINT8 MuxToBmcAllowed : 1; - UINT8 MuxToSystemBlocked : 1; -} IPMI_MUX_CONFIG; - -// -// Definitions for Get TAP Response Code command -// -#define IPMI_TRANSPORT_GET_TAP_RESPONSE_CODE 0x13 - -// -// Constants and Structure definitions for "Get TAP Response Code" command to follow here -// - -// -// Definitions for Set PPP UDP Proxy Transmit Data command -// -#define IPMI_TRANSPORT_SET_PPP_UDP_PROXY_TXDATA 0x14 - -// -// Constants and Structure definitions for "Set PPP UDP Proxy Transmit Data" command to follow here -// - -// -// Definitions for Get PPP UDP Proxy Transmit Data command -// -#define IPMI_TRANSPORT_GET_PPP_UDP_PROXY_TXDATA 0x15 - -// -// Constants and Structure definitions for "Get PPP UDP Proxy Transmit Data" command to follow here -// - -// -// Definitions for Send PPP UDP Proxy Packet command -// -#define IPMI_TRANSPORT_SEND_PPP_UDP_PROXY_PACKET 0x16 - -// -// Constants and Structure definitions for "Send PPP UDP Proxy Packet" command to follow here -// - -// -// Definitions for Get PPP UDP Proxy Receive Data command -// -#define IPMI_TRANSPORT_GET_PPP_UDP_PROXY_RX 0x17 - -// -// Constants and Structure definitions for "Get PPP UDP Proxy Receive Data" command to follow here -// - -// -// Definitions for Serial/Modem connection active command -// -#define IPMI_TRANSPORT_SERIAL_CONNECTION_ACTIVE 0x18 - -// -// Constants and Structure definitions for "Serial/Modem connection active" command to follow here -// - -// -// Definitions for Callback command -// -#define IPMI_TRANSPORT_CALLBACK 0x19 - -// -// Constants and Structure definitions for "Callback" command to follow here -// - -// -// Definitions for Set user Callback Options command -// -#define IPMI_TRANSPORT_SET_USER_CALLBACK_OPTIONS 0x1A - -// -// Constants and Structure definitions for "Set user Callback Options" command to follow here -// - -// -// Definitions for Get user Callback Options command -// -#define IPMI_TRANSPORT_GET_USER_CALLBACK_OPTIONS 0x1B - -// -// Constants and Structure definitions for "Get user Callback Options" command to follow here -// - -// -// Below is Definitions for SOL Commands (Chapter 26) -// - -// -// Definitions for SOL activating command -// -#define IPMI_TRANSPORT_SOL_ACTIVATING 0x20 - -// -// Constants and Structure definitions for "SOL activating" command to follow here -// - -// -// Definitions for Set SOL Configuration Parameters command -// -#define IPMI_TRANSPORT_SET_SOL_CONFIG_PARAM 0x21 - -// -// Constants and Structure definitions for "Set SOL Configuration Parameters" command to follow here -// - -// -// Definitions for Get SOL Configuration Parameters command -// -#define IPMI_TRANSPORT_GET_SOL_CONFIG_PARAM 0x22 - -// -// Constants and Structure definitions for "Get SOL Configuration Parameters" command to follow here -// -#pragma pack() -#endif -- 2.5.1.windows.1 _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
