I think that you need to debug your DriverBinding.Start() and DriverBinding.Supported() APIs. Those are what gets called in your driver when 'connect' shell command it used.
-Jaben > -----Original Message----- > From: edk2-devel [mailto:[email protected]] On Behalf Of > Mahan, Patrick > Sent: Wednesday, December 16, 2015 12:24 PM > To: [email protected] > Subject: [edk2] Help in testing PCIe driver from UEFI shell > Importance: High > > All, > > I am looking for information on how to test our PCIe DXE driver for our NIC on > Intel. I am building from the latest EDK2 > sources using gcc v4.8 on Ubuntu. > > The 'ver' command from the UEFI shell gives - > > EFI Specification Revision : 2.10 > EFI Vendor : Dell > EFI Revision : 520.1 > > I have created a EDK2 package as per the instuctions in section 30 of the UEFI > Driver Writer's Guide and have created > a .efi file that I then copy to the FAT-32 partition used for EFI > (/boot/efi/EFI/ubuntu). > > I can load the driver successfully, print statements embedded show the > driver's entry point is properly called. > > However, when attempting to connect it is showing 0 for the PCI device which > looks very suspicious to me. > > Also, the shell 'pci' command does not show the NIC card, but if I boot into > Ubuntu, lspci shows the card just fine > which leads me to suspect that the PCI bus is not being scanned. > > I've been googling around for a day now and cannot find any tutorials, > examples or notes by anyone on how to > address this issue, so I anyone has some pointers to give, I would appreciate > it > greatly (with your favorite beverage > if you wish :-) ). > > Most of our initial work was done on our company's AARCH64 platform for > which I simply included the driver's .inf > into the platform .dsc and .fdf files and it is working there. I would like > to > move over to the Intel platform and test > there for further validation. > > Thanks for any pointers, > > Patrick Mahan > Cavium, Inc. > _______________________________________________ > edk2-devel mailing list > [email protected] > https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
