Thanks, Michael and Andrew... On Thu, 1 Sep 2016 at 20:56 Andrew Fish <[email protected]> wrote:
> > > On Sep 1, 2016, at 4:48 AM, GN Keshava <[email protected]> wrote: > > > > Thanks Michael, > > > > By sample I mean is there any code which uses Serial IO Protocol to > > read/write to UART in edk2 package? or any open source code should be > fine. > > > > This is just to get an idea how I can use the protocol. > > > > All you need to do is read 11.8 in the UEFI Specification Serial I/O > Protocol. Chapter 11 is for Protocols - Console Support. > > Thanks, > > Andrew Fish > > > > Thanks > > Keshava > > > > On Thu, 1 Sep 2016 at 17:09 Michael Zimmermann <[email protected] > > > > wrote: > > > >> I can't give you sample code but if you're familiar with using UEFI > >> protocols it's actually very easy. You just have to use > >> the gEfiSerialIoProtocolGuid protocol which can be found in: > >> MdePkg/Include/Protocol/SerialIo.h > >> > >> Thanks > >> Michael > >> > >> On Thu, Sep 1, 2016 at 1:22 PM, GN Keshava <[email protected]> > wrote: > >> > >>> Hi all, > >>> > >>> I want to write UEFI application which reads/writes to serial IO. > >>> Is there a sample UEFI application code available which demonstrates > >>> Serial > >>> IO read/write? > >>> > >>> Thanks. > >>> With regards, > >>> Keshava > >>> > >> _______________________________________________ > >>> edk2-devel mailing list > >>> [email protected] > >>> https://lists.01.org/mailman/listinfo/edk2-devel > >>> > >> > >> > > _______________________________________________ > > edk2-devel mailing list > > [email protected] > > https://lists.01.org/mailman/listinfo/edk2-devel > > _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
