Reviewed-by: Jeff Fan <[email protected]>
-----Original Message-----
From: Laszlo Ersek [mailto:[email protected]]
Sent: Friday, November 18, 2016 9:53 PM
To: edk2-devel-01
Cc: Fan, Jeff; Justen, Jordan L; Kinney, Michael D; Paolo Bonzini
Subject: [PATCH v2 1/4] UefiCpuPkg/PiSmmCpuDxeSmm: dynamic
PcdCpuSmmApSyncTimeout, PcdCpuSmmSyncMode
Move the declaration of these PCDs from the
[PcdsFixedAtBuild, PcdsPatchableInModule]
section of "UefiCpuPkg/UefiCpuPkg.dec" to the
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
section. Their types, default values, and token values remain unchanged.
Only UefiCpuPkg/PiSmmCpuDxeSmm consumes these PCDs, specifically on the call
stack of its entry point function, and it turns them into static or dynamically
allocated data in SMRAM:
PiCpuSmmEntry() [PiSmmCpuDxeSmm.c]
InitializeSmmTimer() [SyncTimer.c]
PcdCpuSmmApSyncTimeout
-> mTimeoutTicker
InitializeMpServiceData() [MpService.c]
InitializeMpSyncData() [MpService.c]
PcdCpuSmmSyncMode
-> mSmmMpSyncData->EffectiveSyncMode
However, there's another call path to fetching "PcdCpuSmmSyncMode", namely
SmmInitHandler() [PiSmmCpuDxeSmm.c]
InitializeMpSyncData() [MpService.c]
PcdCpuSmmSyncMode
-> mSmmMpSyncData->EffectiveSyncMode
and this path is exercised during S3 resume (as stated by the comment in
SmmInitHandler() too, "Initialize private data during S3 resume").
While we can call the PCD protocol (via PcdLib) for fetching dynamic PCDs in
the entry point function, we cannot do that at S3 resume. Therefore pre-fetch
PcdCpuSmmSyncMode into a new global variable (which lives in
SMRAM) in InitializeMpServiceData(), just before calling
InitializeMpSyncData(). This way InitializeMpSyncData() can retrieve the
stashed PCD value from SMRAM, regardless of the boot mode.
Cc: Jeff Fan <[email protected]>
Cc: Jordan Justen <[email protected]>
Cc: Michael Kinney <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=230
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <[email protected]>
---
Notes:
v2:
- new in v2
UefiCpuPkg/UefiCpuPkg.dec | 20 ++++++++++----------
UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c | 4 +++-
2 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec index
89779c447d50..ca560398bbef 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -156,10 +156,6 @@ [PcdsFixedAtBuild, PcdsPatchableInModule]
# @Prompt Processor stack size in SMM.
gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmStackSize|0x2000|UINT32|0x32132105
- ## Specifies timeout value in microseconds for the BSP in SMM to wait for
all APs to come into SMM.
- # @Prompt AP synchronization timeout value in SMM.
- gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmApSyncTimeout|1000000|UINT64|0x32132104
-
## Indicates if SMM Code Access Check is enabled.
# If enabled, the SMM handler cannot execute the code outside SMM regions.
# This PCD is suggested to TRUE in production image.<BR><BR> @@ -168,12
+164,6 @@ [PcdsFixedAtBuild, PcdsPatchableInModule]
# @Prompt SMM Code Access Check.
gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmCodeAccessCheckEnable|TRUE|BOOLEAN|0x60000013
- ## Indicates the CPU synchronization method used when processing an SMI.
- # 0x00 - Traditional CPU synchronization method.<BR>
- # 0x01 - Relaxed CPU synchronization method.<BR>
- # @Prompt SMM CPU Synchronization Method.
- gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmSyncMode|0x00|UINT8|0x60000014
-
## Specifies the number of variable MTRRs reserved for OS use. The default
number of
# MTRRs reserved for OS use is 2.
# @Prompt Number of reserved variable MTRRs.
@@ -214,6 +204,16 @@ [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic,
PcdsDynamicEx]
# @Prompt Use static page table for all memory in SMM.
gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmStaticPageTable|TRUE|BOOLEAN|0x3213210D
+ ## Specifies timeout value in microseconds for the BSP in SMM to wait for
all APs to come into SMM.
+ # @Prompt AP synchronization timeout value in SMM.
+
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmApSyncTimeout|1000000|UINT64|0x3213
+ 2104
+
+ ## Indicates the CPU synchronization method used when processing an SMI.
+ # 0x00 - Traditional CPU synchronization method.<BR>
+ # 0x01 - Relaxed CPU synchronization method.<BR>
+ # @Prompt SMM CPU Synchronization Method.
+ gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmSyncMode|0x00|UINT8|0x60000014
+
[PcdsDynamic, PcdsDynamicEx]
## Contains the pointer to a CPU S3 data buffer of structure ACPI_CPU_DATA.
# @Prompt The pointer to a CPU S3 data buffer.
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
index 9b8db90ff6ed..cfbf59e8f2ca 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
@@ -24,6 +24,7 @@ UINTN
mSmmMpSyncDataSize;
SMM_CPU_SEMAPHORES mSmmCpuSemaphores;
UINTN mSemaphoreSize;
SPIN_LOCK *mPFLock = NULL;
+SMM_CPU_SYNC_MODE mCpuSmmSyncMode;
/**
Performs an atomic compare exchange operation to get semaphore.
@@ -1338,7 +1339,7 @@ InitializeMpSyncData (
//
mSmmMpSyncData->BspIndex = (UINT32)-1;
}
- mSmmMpSyncData->EffectiveSyncMode = (SMM_CPU_SYNC_MODE) PcdGet8
(PcdCpuSmmSyncMode);
+ mSmmMpSyncData->EffectiveSyncMode = mCpuSmmSyncMode;
mSmmMpSyncData->Counter = mSmmCpuSemaphores.SemaphoreGlobal.Counter;
mSmmMpSyncData->InsideSmm =
mSmmCpuSemaphores.SemaphoreGlobal.InsideSmm;
@@ -1392,6 +1393,7 @@ InitializeMpServiceData (
(sizeof (SMM_CPU_DATA_BLOCK) + sizeof (BOOLEAN)) *
gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;
mSmmMpSyncData = (SMM_DISPATCHER_MP_SYNC_DATA*) AllocatePages
(EFI_SIZE_TO_PAGES (mSmmMpSyncDataSize));
ASSERT (mSmmMpSyncData != NULL);
+ mCpuSmmSyncMode = (SMM_CPU_SYNC_MODE)PcdGet8 (PcdCpuSmmSyncMode);
InitializeMpSyncData ();
//
--
2.9.2
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.01.org/mailman/listinfo/edk2-devel
