On 29 April 2017 at 14:48, Jiewen Yao <[email protected]> wrote: > ================ V4 ============== > Refine the EDKII_IOMMU_PROTOCOL. > > 1) Add AllocateBuffer/FreeBuffer/Map/Unmap() API. > They are similar to DmaLib in EmbeddedPkg and > similar to the previous BmDmaLib (by [email protected]). > > These APIs are invoked by PciHostBridge driver > to allocate DMA memory. > > The PciHostBridge driver (IOMMU consumer) is simplified: > It uses IOMMU, if IOMMU protocol is present. > Else it uses original logic. > > 2) Add SetMappingAttribute() API. > It is similar to SetAttribute() API in V1. > > This API is invoked by PciBus driver to set DMA > access attribute (read/write) for device. > > The PciBus driver (IOMMU consumer) is simplified: > It sets access attribute in Map/Unmap, > if IOMMU protocol is present. > > 3) Remove SetRemapAddress/GetRemapAddress() API. > Because PciHostBridge/PciBus can call the APIs defined > above, there is no need to provide remap capability. > > -- Sample producer drivers: > 1) The sample VTd driver (IOMMU producer) > is at https://github.com/jyao1/edk2/tree/dma_v4/IntelSiliconPkg/IntelVTdDxe > > It is added to show the concept. It is not fully implemented yet. > It will not be checked in in this patch. > > 2) The sample AMD SEV driver (IOMMU producer) > is at > https://github.com/jyao1/edk2/tree/dma_v4/IntelSiliconPkg/SampleAmdSevDxe > (code is borrowed from [email protected] and [email protected]) > > This is not a right place to put this driver. > > It is added to show the concept. > It is not fully implemented. It will not be checked in. > Please do not use it directly. > > 3) The sample STYX driver (IOMMU producer) > is at https://github.com/jyao1/edk2/tree/dma_v4/IntelSiliconPkg/SampleStyxDxe > (code is borrowed from [email protected]) > > This is not a right place to put this driver. > > It is added to show the concept. > It is not fully implemented. It will not be checked in. > Please do not use it directly. >
With the issue in 3/3 addressed: Tested-by: Ard Biesheuvel <[email protected]> on AMD Seattle, with a static remapping driver that I will send out shortly. I am quite happy with this version, but I would like to continue the discussion as to whether we really need SetAttribute() and SetMappingAttribute() -- Ard. > > ================ V3 ============== > 1) Add Remap capability (from Ard Biesheuvel) > Add EDKII_IOMMU_REMAP_ADDRESS API in IOMMU_PROTOCOL. > > NOTE: The code is not fully validated yet. > The purpose is to collect feedback to decide the next step. > > ================ V2 ============== > 1) Enhance Unmap() in PciIo (From Ruiyu Ni) > Maintain a local list of MapInfo and match it in Unmap. > > 2) CopyMem for ReadOperation in PciIo after SetAttribute (Leo Duran) > Fix a bug in V1 that copy mem for read happen before SetAttribute, > which will break AMD SEV solution. > > ================ V1 ============== > > This patch series adds IOMMU protocol and updates the consumer > to support IOMMU based DMA access in UEFI. > > This patch series can support the BmDmaLib request for AMD SEV. > submitted by Duran, Leo <[email protected]> and Brijesh Singh > <[email protected]>. > https://lists.01.org/pipermail/edk2-devel/2017-March/008109.html, and > https://lists.01.org/pipermail/edk2-devel/2017-March/008820.html. > We can have an AMD SEV specific IOMMU driver to produce IOMMU protocol, > and clear SEV in IOMMU->SetAttribute(). > > This patch series can also support Intel VTd based DMA protection, > requested by Jiewen Yao <[email protected]>, discussed in > https://lists.01.org/pipermail/edk2-devel/2017-March/008157.html. > We can have an Intel VTd specific IOMMU driver to produce IOMMU protocol, > and update VTd engine to grant or deny access in IOMMU->SetAttribute(). > > This patch series does not provide a full Intel VTd driver, which > will be provide in other patch in the future. > > The purpose of this patch series to review if this IOMMU protocol design > can meet all DMA access and management requirement. > > Cc: Ruiyu Ni <[email protected]> > Cc: Leo Duran <[email protected]> > Cc: Brijesh Singh <[email protected]> > Cc: Ard Biesheuvel <[email protected]> > Contributed-under: TianoCore Contribution Agreement 1.0 > Signed-off-by: Jiewen Yao <[email protected]> > > Jiewen Yao (3): > MdeModulePkg/Include: Add IOMMU protocol definition. > MdeModulePkg/PciHostBridge: Add IOMMU support. > MdeModulePkg/PciBus: Add IOMMU support. > > MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c | 9 + > MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h | 1 + > MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf | 1 + > MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c | 37 +++ > MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c | 37 +++ > MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf | 2 + > MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridge.h | 2 + > MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c | 61 ++++ > MdeModulePkg/Include/Protocol/IoMmu.h | 310 > ++++++++++++++++++++ > MdeModulePkg/MdeModulePkg.dec | 3 + > 10 files changed, 463 insertions(+) > create mode 100644 MdeModulePkg/Include/Protocol/IoMmu.h > > -- > 2.7.4.windows.1 > _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
