> On May 18, 2017, at 8:28 AM, Tomas Pilar (tpilar) <[email protected]> > wrote: > > This is what I was afraid of. I am writing an IHV network driver that lives > in optionROM. >
Tomas, I think this issue is fixed in the current Specs and edk2 code. The PI Spec defines an Protocol, gEfiSmbiosProtocolGuid, for SMBIOS and the current edk2 implementation publishes the tables as data comes in. https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.c#L516 // // Some UEFI drivers (such as network) need some information in SMBIOS table. // Here we create SMBIOS table and publish it in // configuration table, so other UEFI drivers can get SMBIOS table from // configuration table without depending on PI SMBIOS protocol. // SmbiosTableConstruction (Smbios32BitTable, Smbios64BitTable); Looks like your issue is working on older systems? Thanks, Andrew Fish > Cheers, > Tom > > On 18/05/17 16:25, [email protected] wrote: >> It is a tricky problem. >> >> What I would like is for a new protocol to be defined, which should >> not rely on devices, to contain certain identifying information >> like this that would be useful to device drivers. It could be >> created early in DXE. >> >> What I fear is some future requirement that SMBIOS be made available >> at some definitive time pre-OS boot. >> >> You may have to get support from the BIOS vendor. If you are doing a >> driver for a particular system, that might not be too bad of a >> solution; but if you're trying to develop some generic driver, I >> don't have a good suggestion. >> >> Regards, >> Jim >> >> -----Original Message----- >> From: edk2-devel [mailto:[email protected]] On Behalf Of Tomas >> Pilar (tpilar) >> Sent: Thursday, May 18, 2017 10:14 AM >> To: Dailey, Jim <[email protected]> >> Cc: [email protected] >> Subject: Re: [edk2] SMBios configuration table not present until late stage >> of boot >> >> This does make sense. Do you have a suggestion how I would go about >> finding/creating a unique identifier for the system during preboot? >> >> Cheers, >> Tom >> >> On 18/05/17 16:11, [email protected] wrote: >>> Not a helpful comment, but I wanted to air my feelings on the topic: >>> >>> I view SMBIOS as data strictly for OS-level consumption and not for >>> any pre-boot code. I'm sure I'm in the minority, however. >>> >>> One of the problems is that the BIOS needs to have scanned all >>> devices/resources and perhaps executed a connect all before the >>> tables can be generated (or at least completed). >>> >>> Regards, >>> Jim >>> >>> -----Original Message----- >>> From: edk2-devel [mailto:[email protected]] On Behalf Of >>> Tomas Pilar (tpilar) >>> Sent: Thursday, May 18, 2017 10:01 AM >>> To: [email protected] >>> Subject: [edk2] SMBios configuration table not present until late stage of >>> boot >>> >>> Hi, >>> >>> I am trying to read the system UUID from the System Table (Type 1) in >>> the SMBios set of tables. I am doing this during DriverBinding.Start() >>> part of the UEFI_DRIVER initialisation. Unfortunately the >>> gST->ConfigurationTable only contains 6 tables and SMBios is not one of >>> them. >>> >>> Once I boot into UEFI shell or start a PXE booting process, the >>> gST->ConfigurationTable now contains 8 tables and SMBios is one of the >>> two new tables. If I however only boot to a HDD, this never seems to >>> happen. >>> >>> Can someone offer some insight why this might be so and how would I go >>> about forcing the platform to provide the SMBios in >>> gST->ConfigurationTable at a sensible point? >>> >>> Incidentally it seems ExitBootServices is not signaled on this platform >>> if the boot goes through to HDD either, which is another strange thing ... >>> >>> Cheers, >>> Tom >>> >>> >>> >>> _______________________________________________ >>> edk2-devel mailing list >>> [email protected] >>> https://lists.01.org/mailman/listinfo/edk2-devel >> _______________________________________________ >> edk2-devel mailing list >> [email protected] >> https://lists.01.org/mailman/listinfo/edk2-devel > > _______________________________________________ > edk2-devel mailing list > [email protected] > https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
